• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.4
• /
• pp.426-431
• /
• 2004

We have studied the pressure-dependent liquid crystal's dynamics in a twisted nematic (TN) liquid crystal panel with thin film transistor by applying an external pressure to it. When the external pressure is applied to the panel in a dark state, the disclination lines were generated as a light leakage whereas they did not appear in a simple test cell that has only pixel and common electrodes. It was because the disclination lines were Provoked by the electric field between pixel electrode and data/gate bus line for active matrix driving. Consequently, the external pressure resulted in dynamic instability of the liquid crystal so that the disclination lines at the data/gate bus line intruded into the active area.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.158-164
• /
• 2011

When a train passes a conventiaonl tunnel at high speed, external pressure variation problem arises. It is known that this issue can be reduced by control the tunnel length. We studied the variances of external pressure variation within the tunnel, by altering length of the dummy tunnel duct. We also studies the variances of micro-pressure waves at the exit of tunnel, by altering surface area of dummy tunnel duct. For analyzing this train-tunnel relation problem, axisymmetric steady compressible flow solver was used.

• Journal of Biomedical Engineering Research
• /
• v.5 no.1
• /
• pp.47-54
• /
• 1984

In order to research the flow in the thin wall compliant tube, this present study is attempt to measure the cross sectional area according to change of external pressure and flow by ultrasonic method different from willy used impedance technique for flow analysis about one dimensional Steads flow. The experimental results are as follows. 1) Measurement of cross sectional area ratio by ultrasonic method by comparison with experimental results of impedance technique & theoretical results were well consent. 2) Pressure difference of upstream and down stream is alwap's maximum range at 0.4 < $\alpha$ <0.5, and have no connection with changing external pressure. 3) when the external pressure is fixed and resistance is varied, Self excited oscillation occurs in the region at 0.5 < $\alpha$ <0.6, and oscillation disappear almost at R2>=1.2

• Korean Management Science Review
• /
• v.32 no.3
• /
• pp.71-89
• /
• 2015

This research empirically investigated the influence factors on the activation of environmental innovations (EI) in Korean manufacturing firms. In this study, external factors (compulsory demand, government regulation, normative pressure and imitative pressure) and internal factors (environmental resources, top management support, integration of environmental tasks, capabilities of environmental personnel, and environmental strategy/environmental management systems) were totally considered. The results of a multiple regression analysis showed that influence factors such as top management support, environmental resources and integration of environmental tasks have a significant and positive impact on levels of EI. However, the effects of external factors were not statistically significant. We also examined whether capabilities of environmental personnel as well as environmental resources, which are directly related with degrees of EI, have a moderating impact on relationships between other internal factors and levels of EI. With a subgroup analysis, the moderating role of abilities of environmental personnel were empirically confirmed. Through a multiple regression analysis, the direct effects of external factors on the adoption or construction of internal factors were demonstrated. The effects of government regulation, normative pressure and imitative pressure on internal factors were significant and positive. It was also found that external factors have indirect effects on EI through internal factors. Finally, the results of multiple regression analyses indicated that EI positively influences the achievement of environmental competitive benefits, and environmental competitive advantages can improve the organizational performance of a firm.

• The Korean Journal of Emergency Medical Services
• /
• v.18 no.2
• /
• pp.35-43
• /
• 2014

Purpose: The purpose of this study was to establish novice user guidelines for efficient external laryngeal manipulation for intubation in difficult airway management. Methods: This study included 59 pre-qualified junior and senior emergency medical service students. The participants were instructed at random to intubate a manikin equipped with a cervical collar, thus simulating a difficult airway, using three types of external laryngeal manipulation: bimanual laryngoscopy, backward-rightward pressure, and cricoid pressure. The resultant intubation time and glottic view grade scores were estimated. Results: Intubation time was longest using the bimanual manipulation method, followed by cricoid pressure and backward-rightward pressure. A low Cormack-Lehane glottic view score was obtained regardless of the assisted compression method used. Conclusion: Backward-rightward pressure may be the most efficient method of external laryngeal manipulation on the basis of the intubation time and improvement in glottic view.

• Structural Engineering and Mechanics
• /
• v.14 no.6
• /
• pp.661-677
• /
• 2002

The subject of this investigation is to study the buckling of cross-ply laminated orthotropic cylindrical thin shells with variable elasticity moduli and densities in the thickness direction, under external pressure, which is a power function of time. The dynamic stability and compatibility equations are obtained first. These equations are subsequently reduced to a system of time dependent differential equations with variable coefficients by using Galerkin's method. Finally, the critical dynamic and static loads, the corresponding wave numbers, the dynamic factors, critical time and critical impulse are found analytically by applying a modified form of the Ritz type variational method. The dynamic behavior of cross-ply laminated cylindrical shells is investigated with: a) lamina that present variations in the elasticity moduli and densities, b) different numbers and ordering of layers, and c) external pressures which vary with different powers of time. It is concluded that all these factors contribute to appreciable effects on the critical parameters of the problem in question.

• Journal of the Korean Society of Physical Medicine
• /
• v.14 no.2
• /
• pp.1-7
• /
• 2019

PURPOSE: This study was conducted to investigate effects of shoulder adduction load on rotator cuff muscles, including the infraspinatus, during the external rotation exercise of shoulder. METHODS: This study investigated 16 healthy university students from Daegu University. Before the study started, all participants understood the content of this study. They signed an informed consent form. Five electrodes for surface electromyography (sEMG) were attached to their infraspinatus, middle deltoid, posterior deltoid, upper trapezius and pectoralis major. The participants then underwent the shoulder external rotation exercise with the shoulder adduction at three loads (0 mmHg, 20 mmHg and 40 mmHg) that were controlled using a stabilizer Pressure $Bio-feedback^{TM}$ device. The surface electrodes recorded the electromyographic data during the external rotation exercise of shoulder. RESULTS: The infraspinatus was most activated when the shoulder adduction pressure was 40 mmHg during the external rotation exercise of shoulder. The infraspinatus activation significantly increased when the shoulder adduction pressure intensity increased, while the middle deltoid activation and the posterior deltoid activation significantly decreased (p<.05). CONCLUSION: In conclusion, increases in shoulder adduction load intensity during shoulder external rotation exercises can have a positive effect on the infraspinatus, which consists of rotator cuff muscles, with minimal activity in the middle and posterior deltoid.

• Structural Engineering and Mechanics
• /
• v.9 no.1
• /
• pp.51-68
• /
• 2000

The paper presents theoretical and experimental investigations on three varying thickness circular cylinders, which were tested to destruction under external hydrostatic pressure. The five buckling theories that were presented were based on inelastic shell instability. Three of these inelastic buckling theories adopted the finite element method and the other two theories were based on a modified version of the much simpler von Mises theory. Comparison between experiment and theory showed that one of the inelastic buckling theories that was based on the von Mises buckling pressure gave very good results while the two finite element solutions, obtained by dividing the theoretical elastic instability pressures by experimentally determined plastic knockdown factors gave poor results. The third finite element solution which was based on material and geometrical non-linearity gave excellent results. Electrical resistance strain gauges were used to monitor the collapse mechanisms and these revealed that collapse occurred in the regions of the highest values of hoop stress, where considerable deformation took place.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 1997.11a
• /
• pp.275-281
• /
• 1997

The destruction by accident is affected by the blast of explosion. However, there are few of research on the external effect of vented gas explosions. Therefore it is necessary to study the effect of vented explosion. This study aims to find the characteristics of gas explosion, and the effect of vented gas explosion. Using an explosion chamber, we obtained a LPG explosion characteristics according to the vent size and concentration. The result of experiment showed that the explosion pressure effect to external space was much stronger than inner space during the course of a gas explosion. And the external pressure become higher in explosion pressure as the vent diameter become smaller.

• Journal of Korean Association for Spatial Structures
• /
• v.2 no.1 s.3
• /
• pp.93-102
• /
• 2002

Pressure loads caused by gas, water and wind are the most important load cases in structural analysis. Often the pressure loads are approximated by constant directional loads since it is difficult to evaluate the exact value. However, the pressure load is defined as a displacement dependent one and it is necessary to consider the follower effects of the load in analysis procedure. In this study, the large deformation analysis considering geometrical nonlinearity for shell structures under pressure loads is presented. Finite element by using a three-node flat triangular shell element is formulated and the follower effects of the pressure load are included in the formulation. Some of results are presented for cantilevered beam under uniform external pressure and thin circular ring under non-uniform external pressure. The present results are in good agreement with the results available in existing literature and commercial software ABAQUS.