• Journal of Ocean Engineering and Technology
• /
• v.26 no.5
• /
• pp.5-10
• /
• 2012

In this study, carbon steel (A53) is used as the material for the pipes in a marine plant and ship industry. Welds are necessary to join the carbon steel, and the effect of this welding on the properties of the carbon steel has been studied by many researchers. In this study, the dynamic behavior of welded carbon steel was studied using an acoustic emission (AE) technique, which is a nondestructive test. There are numerous AE parameters that can be used to analyze the damage behavior of carbon steel by external loading. The AE parameters of energy, cumulative count, amplitude, and AE event were used, and each parameter was differentiated according to the degree of damage to the carbon steel. The energy showed a high level at the elastic range of the load curve, while the amplitude had the highest value at the hardening region. The cumulative count showed a growth tendency similar to the loading curve. In addition, an ultrasonic technique and hardness test were applied to evaluate the mechanical properties according to the base zone, HAZ region, and weld zone of the weld specimen. The velocity and attenuation ratio showed little change between zones, and an evaluation of the ultrasonic waves on each zone of the specimen was found to be a useful method to clarify the mechanical properties of the carbon steel.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.5
• /
• pp.1471-1481
• /
• 2014

This paper presents the new power dissipation model of individual switching device in a high-level modular multilevel converter (MMC), which can be mostly used in voltage sourced converter (VSC) based high-voltage direct current (HVDC) system and flexible AC transmission system (FACTS). Also, the voltage balancing method based on sorting algorithm is newly proposed to advance the MMC functionalities by effectively adjusting switching variations of the sub-module (SM). The proposed power dissipation model does not fully calculate the average power dissipation for numerous switching devices in an arm module. Instead, it estimates the power dissipation of every switching element based on the inherent operational principle of SM in MMC. In other words, the power dissipation is computed in every single switching event by using the polynomial curve fitting model with minimum computational efforts and high accuracy, which are required to manage the large number of SMs. After estimating the value of power dissipation, the thermal condition of every switching element is considered in the case of external disturbance. Then, the arm modeling for high-level MMC and its control scheme is implemented with the electromagnetic transient simulation program. Finally, the case study for applying to the MMC based HVDC system is carried out to select the appropriate insulated-gate bipolar transistor (IGBT) module in a steady-state, as well as to estimate the proper thermal condition of every switching element in a transient state.

• Water for future
• /
• v.24 no.4
• /
• pp.49-58
• /
• 1991

Flood routing in the Youngsan River was performed for the flood event of July, 1989 by two finite difference methods. The Saint Venant eq., a kind of hyperbolic partial differential equation is employed as governing equation and the explicit scheme (Leap Frog) and implicit scheme (Preissmann) are used to discretize the GE. As for the external boundary conditions, discharge and tidal elevation are upstream and downstream BC, respectively and estuary dam is included in internal BC. Lateral inflows and upstream discharges are the hourly results from storage function method, At Naju station, a Relatively upstream points in this river, the outputs are interpreted as good ones by comparing two numerical results of FDMs with the observed data and the calibrated results by storage function method. and two computational results are compared at the other sites, from middle stream and downstream points, and thus are considered reliable. Therefore, we can conclude from this research that these numerical models are adaptable in simulating and forecasting the flood in natural channels in Korea as well as existing hydrologic models. And the study about optimal gate control at the flood time is expected as further study using these models.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.9
• /
• pp.4075-4082
• /
• 2011

In the event of the emergency patient care, cabin crew must take the charge of the first responder quickly. The basic emergency treatment knowledge of the cabin crew consisted of 80.5%~97.8% when the emergency scene showed up in the passenger and the types of emergency care with that the cabin crew could cope were bleeding control, fever, seizures, myocardial infarction, airway management, and partial airway obstruction management. Considering these cares, the improper emergency types revealed approximately 3.2%~20.0%. In airway obstruction there was followed by loss of consciousness and this led to cardiac arrest. In case of cardiac arrest, the cabin crew must know how to check breathing and to use the automated external defibrillator(AED). The life-threatening cardiac arrest can happen to any passenger in any time, so the cabin crew should meet with the emergency accident and apply the AED to the cardiac arrest victim.

• Journal of Chest Surgery
• /
• v.54 no.5
• /
• pp.383-388
• /
• 2021

Background: Achieving external access to and manual occlusion of the left atrial appendage (LAA) during minimally invasive mitral valve surgery (MIMVS) through a small right thoracotomy is difficult. Occlusion of the LAA using an epicardial closure device seems quite useful compared to other surgical techniques. Methods: Fourteen patients with atrial fibrillation underwent MIMVS with concomitant surgical occlusion of the LAA using double-layered endocardial closure stitches (n=6, endocardial suture group) or the AtriClip Pro closure device (n=8, AtriClip group) at our institution. The primary safety endpoint was any device-related adverse event, and the primary efficacy endpoint was successful complete occlusion of blood flow into the LAA as assessed by transthoracic echocardiography at hospital discharge. The primary efficacy endpoint for stroke reduction was the occurrence of ischemic or hemorrhagic neurologic events. Results: All patients underwent LAA occlusion as scheduled. The cardiopulmonary bypass and aortic cross-clamp times in the endocardial suture group and the AtriClip group were 202±39 and 128±41 minutes, and 213±53 and 136±44 minutes, respectively (p=0.68, p=0.73). No patients in either group experienced any device-related serious adverse events, incomplete LAA occlusion, early postoperative stroke, or neurologic complication. Conclusion: Epicardial LAA occlusion using the AtriClip Pro during MIMVS in patients with mitral valve disease and atrial fibrillation is a simple, safe, and effective adjunctive procedure.

• Nuclear Engineering and Technology
• /
• v.53 no.11
• /
• pp.3824-3836
• /
• 2021

Workers' safety from radiological exposure in a 1 ton/day capacity spent resin treatment facility was evaluated according to the operating times and outflow rate due to process related leakages. The conservative annual dose based on the operating times of the workers exceeded the dose limit by at least 7.38E+01 mSv for close work. The realistic dose range was derived as 1.62E+01 mSv-6.60E+01 mSv. The conservative and realistic annual doses for remote workers were 1.33E+01 mSv and 3.00E+00 mSv respectively, which were less than the dose limit. The MWR was identified as the major contributor to worker exposure within the 1 h period required for removal of radioactive materials. The dose considering both internal and external exposures without APF was derived to be 1.92E+01 mSv for conservative evaluation and 4.00E+00 mSv for realistic evaluation. Furthermore, the dose with APF was derived as 7.27E-01 mSv for conservative evaluation and 1.51E-01 mSv for realistic evaluation. Considering the APF for leakage from all parts, the dose range was derived as 1.25E+00 mSv-2.03E+00 mSv for conservative evaluation and 2.61E-01 mSv-4.23E-01 mSv for realistic evaluation. Hence, it was confirmed that radiological safety was secured in the event of a leakage accident.

• Journal of English Language & Literature
• /
• v.64 no.3
• /
• pp.453-468
• /
• 2018

Nat Turner's rebellion in 1831 was considered pre Civil War South's most dreadful nightmare due to the merciless murder of white slave owner victims. The motive of vengeance has been emphasized as that of Turner's notorious black preacher religious fanaticism. However, the recent film, The Birth of a Nation (2016) directed by Nate Parker, utilized the identical title of a film (1915) directed by D. W. Griffith. Providing limited evidence, information about the rebellion in Thomas Gray's pamphlet The Confessions of Nat Turner (1831), was the only accessible historical source for the factual event of the slaves' rebellion. In addition, William Styron's The Confessions of Turner (1967), a fictionalized biography, also examined Turner's life in the harshness of slavery. Although these two texts deal with the personal level of Nat Turner's rage and religious enthusiasm, both provide only fractured parts of the motive of vengeance. Strikingly, Parker's film interrogates the ideology of "victims," as well as the hierarchical term of "confessions," with their different positions between whites and blacks. More specifically, Parker's film offers discursive fields of proslavery arguments regarding biblical interpretations in addition to external visualization of slaves' inner emotional lives. The film demonstrates how the institution of slavery allowed slaves to be exploited, beaten, raped, through interrogating the problematic image of the "contested hero" Nat Turner. In contrast to the traditional image of blacks' bloody rebellion, the film underlines the absurdity of certain Biblical misinterpretations. It furthermore implies how the 1915 film manipulated proslavery propaganda in America.

• Journal of Korean Neurosurgical Society
• /
• v.65 no.1
• /
• pp.114-122
• /
• 2022

Objective : Early descent of the diaphragm sellae (DS) during endoscopic endonasal transsphenoidal surgery (EETS) for pituitary macroadenoma surgery is occasionally a troublesome event by blocking the surgical field. Here we introduce an alternative technique with the new pituitary retractor and present our clinical experiences. Methods : We designed a simple and rigid pituitary retractor with the least space occupation in the nasal cavity to be compatible in EETS. The pituitary retractor was held by external holder system to support the herniated DS stably. We retrospectively reviewed a clinical 22 cases of pituitary macroadenomas underwent EETS using the pituitary retractor. Results : The pituitary retractor stably pushed up the herniated DS in all cases, and the surgeon proceeded the procedure with bimanual maneuver. The pituitary retractor was helpful to remove tumors around the medial cavernous sinus and behind the DS in 16 and seven cases, respectively. In four cases, the meticulous hemostasis was completed with the direct visualization by the DS elevation with this retractor. Gross total tumor resection was performed in 20/22 patients (91%). The impaired visual function and hypopituitarism were improved in 18/20 (90%) and 7/14 (50%) patients after surgery, respectively. There was no complication related with the pituitary retractor. Conclusion : During EETS for pituitary macroadenomas, the novel pituitary retractor reported in this study is a very useful technique when the herniated DS block the surgical field and bimanual maneuver. This pituitary retractor can help to result in the excellent surgical outcomes with minimal morbidity.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.961-965
• /
• 1998

The rapid development of small-scale (1-10 MJ) Superconducting Magnetic Energy Storage Systems (SMES) can be explained by real perspective of practical implementation of these devices in electro power nets. However the serious problem of all high mechanically stressed superconducting coils-problem of training and degradation (decreasing) of operating current still exists. Moreover for SMES systems this problems is more dangerous because of pulsed origin of mechanical stresses-one of the major sources of local heat disturbances in superconducting coils. We investigated acoustic emission (AE) phenomenon on model and 0.5 MJ SMES coils taking into account close correlation of AE and local heat disturbances. Two-coils 0.5 MJ SMES system was developed, manufactured and tested at Russian Research Center in the frames of cooperation with Korean Electrical Engineering Company (KEPCO) [1]. The two-coil SMES operates with the stored energy transmitted between coils in the course of a single cycle with 2 seconds energy transfer time. Maximum operating current 1.55 kA corresponds to 0.5 MF in each coil. The Nb-Ti-based conductor was designed and used for SMES manufacturing. It represents transposed cable made of Nb-Ti strands in copper matrix, several cooper strands and several stainless steel strands. The coils are wound onto fiberglass cylindrical bobbins. To make AE event information more useful a real time instrumentation system was used. Two main measured and computer processed AE parameters were considered: the energy of AE events (E) and the accumulated energy of AE events (E ). Influence of current value in 0.5 MJ coils on E and E was studied. The sensors were installed onto the bobbin and the external surface of magnets. Three levels of initial current were examined: 600A, 1000A, 2450 A. An extraordinary strong dependence of the current level on E and E was observed. The specific features of AE from model coils, operated in sinusoidal vibration current changing mode were investigated. Three current frequency modes were examined: 0.012 Hz, 0.03 Hz and 0.12 Hz. In all modes maximum amplitude 1200 A was realized.

• Journal of the Korea Society for Simulation
• /
• v.22 no.4
• /
• pp.39-47
• /
• 2013

Simulation based Battle Experimentation is to examine the readiness for a battle using simulation technology. It heavily relies on the weapon systems modeling and simulation. To analyze the characteristics and complexity of the weapon systems in the experiment, the modeling & simulation environment has to be able to break down the system of systems into components and make the use of high fidelity components such as real hardware in simulation. In that sense, the modular and hierarchical structure of DEVS (Discrete EVent System Specification) framework provides potentials to meet the requirements of the battle experimentation environment. This paper describes the development of the DEVS integrated development environment for Simulation based Battle Experimentation. With the design principles of easy, flexible, and fast battle simulation, the newly developed battle experimentation tool mainly consists of 3 parts - model based graphical design tool for making DEVS models and linking them with external simulators easily through diagrams, the experiment plan tool for speeding up a statistic analysis, the standard components model libraries for lego-like building up a weapon system. This noble simulation environment is to provide a means to analyze complex simulation based experiments with different levels of models mixed in a simpler and more efficient way.