Cardiopulmonary bypass cannulas are usually characterized by the French number. However this de- scription provides only the external diameter of the cannula, which gives no information about the press- ure-flow characteristics of the cannula itself. A standardized system to describe the pressure-flow characteristics of a given cannula has recently been proposed and has been termed the M-number It is reported that the pressure-flow characteristics of a particular cannula can be determined from a novo- gram or chart, if the experimentally derived M-number of the cannula is known. In this regard, we conducted an investigation to analyze correlation between experimentally and clinical y derived M-numbers using three different sizes of pediatric aortic cannulas in fifty cardiac patients on cardiopulmonary bypass. The clinical and experimental M-numbers showed a strong correlation. The clinical M-numbers were typically 0.)5 to 0.55 greater than the experimental M-numbers. The clinical M-numbers also showed an inverse relationship to the temperature change of the patient, most probably due to an increase in blood viscosity from hypothermia. This inverse clinical M-numbersltemperature re- lationship was more marked in higher M-number cannulas. The clinical data obtained in this study suggest that the experimentally derived M-numbers correlated strongly with the clinical performance of the cannula with the significant influence of the temperature.
With the increasing trend of making manufacturing system intelligent and autonomous, the introduction of robot-assist automation, like machine tending system for automated operation of CNC machine tools, is being actively carried out at many industrial sites. Most important part of this intelligent system to install machine tending system, is interface programming between the CNC machine tools and the industrial robot. Despite this importance, however, the machine tending system has many setup problems. it is necessary for difficult re-program of both controllers whenever a new CNC machine tool or robot is introduced. And, the helps of external engineers is required even though trivial changes due to the complex structure of the machine tending system. Authors of this paper introduces the integrated system of the interface between heterogeneous CNC machine tools and industrial robots. In addition, the digital twin implemented inside the machine tool controller enable shop-floor operators to change the interface programming easily. To implement this system, an integrated development environment for 1) an intelligent HMI platform that provide standardized interfaces to heterogeneous CNC machine tools and 2) a robot platform developing application software of various robots, was established. For easy un-tact environment, this paper explain the development of 3) a game-engine based web program of controlling and monitoring machine tending system remotely.
This study investigated the flow rate changes of the heterogeneous rectangular microchannels which have different hydrophilic property on the bottom surface. The heterogeneous rectangular microchannel has three native PDMS (poly-dimethyl siloxane) surfaces which were patterned by the soft lithography. PDMS bottom surface was treated by the argon plasma and coated by the allyl alcohol (99%). The channel length was 10, 20 and 30 mm and the channel width was 100, 200 and $300\;{\mu}m$, respectively. Several external voltages were applied to make the fluid flow by the electroosmosis in the microchannel. For the same electric field strength and hydrophilicity of the bottom surface, the flow rate is almost same. This result is matched to the theoretical expectation and confirms that the experimental system is reliable. With increasing the channel width, the flow rate increased for the same hydrophilicity of the bottom surface. The flow rate of the microchannel of higher hydrophilicity was larger than that of the microchannel of lower hydrophilicity. This result implies that the hydrophilicity change of the bottom surface could be applied to control the flow rate in the microchannel.
We tested fruits quality and skin coloration of two pear cultivar 'Wonhwang' and 'Whasan' produced by bagging with different kinds of paper bags in the Cheonan area, Chungnam Province, Korea. The fruits were bagged at 35, 45, 55 or 65 days after full bloom (DAFB) with 3 kinds of double layer paper bag which consisted of grey color, yellow color and newspaper for outer layer. The great extent of light interruption was observed in grey colored outer paperbag among three kinds of paperbag which showed only 0.46% of lowest light transmittance when compared with 43.7% and 40.0% of yellow paper and newspaper, respectively. The development of skin redness ($a^*$) increased with the delay of bagging time in two pear cultivars. But the fruits treated at 65 DAFB showed uneven coloration and excessive development of redness which represented low fruit external appearance value. Uniform flesh firmness was attained at the fruits bagged with grey outer color paperbag regardless of bagging time, although the fruit quality indices including soluble solids and titratable acidity did not change significantly by using different kind of fruit bags and bagging time in two pear cultivar. Based on our results, it was explained that the grey-colored fruit bag had positive effect on the development of skin coloration without any detrimental effect on fruit quality factors in 'Wonhwang' and 'Whasan' pears.
Various factors affecting teachers' self-confidence exist in math class using technology such as graphic calculators. For example, internal factors such as teachers' attitude and external factors such as school administrators or colleague's support can be considered. Pedagogical Technology Knowledge(PTK) is the very important factor which determines teacher's self-confidence in educational technology, and the development of PTK is composed of teacher's perception on the technology and its application and instrumentation. This study investigated 19 pre-service and current middle and high school teachers in the respect of their change of self-confidence, attitude, expertise on pedagogical technology, and quality of math class. These are anlayzed with the concept of instrumentation and instrumentalization through various experiences like graphic calculator, GPS and AutoGraph. The result indicated that constraints or obstacles did not affect much if teachers' attitude and self-confidence were strong. Particularly teachers' firm will to learn about technology and their confidence on its value are the critical factors in using technology for mathematics class.
Kim, Dae-Jung;Lee, Nam-Sil;Lee, Bae-Ik;Kim, Shin Kwon;Kim, Kyung-Kil
Journal of Life Science
/
v.23
no.10
/
pp.1288-1294
/
2013
Knowledge of morphological changes in eel larvae is very important for artificial rearing of eel larvae. In this study, we investigated the morphological structure of the head region and histological changes of the eye retina in artificially reared larvae at various stages and in glass eel just after metamorphosis. Structural changes were observed in the upper jaw (maxilla) and the lower jaw (mandible) after 100 dah (day after hatchery) and after metamorphosis. Teeth had degenerated by the time of completion of metamorphosis. Major histological changes observed in the eye retina were the formation of the outer plexiform layer and the outer nuclear layer from 100 dah larva and a change in the rod cell layer after metamorphosis. The cornea was not observed at 10 dah in the eel larva. More information is needed on the early developmental stages of eel larvae to enable mass production of glass eels. The results obtained in the present research will be useful when developing novel rearing programs for eel larvae.
Journal of Korean Society of Environmental Engineers
/
v.27
no.7
/
pp.719-725
/
2005
Anaerobic fill time and feeding pattern in SBR operation were investigated to find way of minimizing poor nitrogen removal efficiency in BNR process without external carbon addition. The three types of the modified SBR operations that were CO-SBR, IA-SBR, and SF-SBR were tested by lab-scale and pilot-scale SBR processes($2\;m^3/day$). In addition, practical equation for biological nitrogen removal was suggested and the equation considered the effect of ratio of fill volume over whole SBR volume and the ratio of step-feed in SBR. The denitrification efficiency of the SF-SBR was best among the three SBRs and followed by IA-SBR, and CO-SBR. The efficiency was 95%, 61%, and 19%, respectively. Looking at the change of sludge floc density by the length of anaerobic fill time, the density of sludge floc at 1 hour and 2 hours of anaerobic fill time were greater than 3 hours of one. The floc size distributions were $100{\sim}300\;{\mu}m$ and $200{\sim}400\;{\mu}m$ with respect to anaerobic fill time 2 hours and 3 hours, respectively.
Purpose - This study aims to accomplish three major research goals. First, it strives to change consumers' focus from peripheral routes to a central route of public service advertising related to the good health policy, without problematic effects, by influencing consumers' knowledge or involvement. Second, this study examines the elaboration likelihood model (ELM) and construal level theory (CLT). Specifically, we consider that the central route of ELM might correspond with the focal goal of CLT. Third, this study analyzes ELM through CLT. That is, ELM predicted that low involvement would take the peripheral route, and high involvement would take the central route. Research design, data, and methodology - This study consisted of three experiments. The first experiment had a 2×2 between-subject design. The subjects were university students and the research period was approximately one year. The first independent variable was the involvement of the overweight issue; this variable was measured and split by the median. The second independent variable was the temporal distance (near vs. distant future); this variable was manipulated. The second experiment also had a 2×2 between-subject design. The first variable was the involvement of cervical adenocarcinoma prevention, and was considered already manipulated by sex. Specifically, males had a low involvement of the disease, but females had high involvement. The second independent variable was priming (power vs. submissive). Power priming would induce abstract thinking, but submissive priming would take concrete processing. The third experiment had a 2×2×2 between-subject design. The first variable was cognitive depletion, and was manipulated by memorizing 9-digit numbers. The second and third independent variables were involvement and abstract thinking induction, such as prior experiments. Data were collected through questionnaires, and were analyzed by an SPSS program. Major hypotheses were tested by examining the interaction effects through ANOVA. Results - Major findings are as follows. First, even for low-involved consumers in the overweight category, distant future manipulation induced them to focus not on the peripheral route but on the central route of the public service advertisement. This result does not correspond to the typical ELM prediction. Second, under power priming, low-involved males of the cervical adenocarcinoma category focused on the peripheral route because of the induction to abstract thinking. This result replicated the first experiment, and confirmed the theoretical robustness. Third, high-involved females focused not on the central but on the peripheral route under the mixed condition of cognitive depletion and near future manipulation. Depletion consumed cognitive resources, and the processing mode of consumers changed from systematic to heuristic. Conclusions - ELM needs to be complemented through CLT in context of public service good health advertising. Specifically, the involvement of ELM may impact consumers' thinking mode (abstract vs. concrete), and the interaction effects may influence consumers' focus on advertising (central vs. peripheral route). This study's limitations were bounded subjects, limited stimuli, and somewhat weak external validity.
Journal of the Korea institute for structural maintenance and inspection
/
v.17
no.2
/
pp.110-116
/
2013
A concrete structure has become bigger and higher because of development of construction technology and a change in construction environment. Also it tends to focus on repairing, reinforcement and exterior in harmony with environment for structure maintenance and performance improvement. The research is about eco friendly durable painting applicable to concrete structure using civil and architecture. it purpose to improve external beauties and durable problems due to flexibility by variation of temperature, adhesion of exterior wall, crack and delamination in existing organic and mineral painting. For those problems, we made a eco friendly pre-paint that is made with preliminary treatment mixture as a highly enriched waterproof agent and adhesive increasing agent in preprocessing mixture. Then we performed an experiment on durability of prevention neutralization of concrete, durability abrasion, hiding power, adhesion, temperature resistance and resistance to chemical attack. The result of an experiment shows that hiding power is over 0.96 in standard test, durability abrasion test got higher value 1mg than water paint 75mg and tensile strength is 6 times higher than standard waterproof specification.
This article presents a historical account of media role in the transition and consolidation period of democracy. Despite the assumption that media plays a important role in the construction of democracy, it is less clear how the media can affect the process of political change itself. This article seeks to answer some of these question, based on the Mill's macro-social comparative 'method of difference' of Korea and Spain. It is widely agreed that both states achieve democracy through transaction from above(pacts). Media role, however, differs significantly in accordance with authoritarian legacies and civic representativeness of the pacts. Whereas Korean dailies is deepening given market oligopoly and prior practices after democratization, Spain dailies market entirely changed in both structural and spiritual respects. As a result, Korean dailies substantially lacks in civic representativeness as before, contrary to Spain. Spain television settled a sort of the external pluralism. Korean television is pursuing the BBC type of internal pluralism. In Korea, television is more commercial than Spain. Consequently, Spain media serve the consolidation of democracy more than Korea on the whole.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.