• Wind and Structures
• /
• 제13권3호
• /
• pp.257-273
• /
• 2010

The aerodynamic and aero-elastic model tests of the China''s highest cooling tower has been carried out in the TJ-3 Boundary Layer Wind Tunnel of Tongji University. By adopting a scanivalve system, the external wind pressure is firstly measured on $12{\times}36$ taps for a single tower, two and four grouped towers under the condition of both smooth flow and the boundary layer due to surrounding geographic and building topography. The measurements of internal wind pressure distribution of $6{\times}36$ taps are taken for a single tower under the various ventilation ratios ranging from 0% to 100% of stuffing layers located at the bottom of the tower. In the last stage, the wind tunnel tests with an aero-elastic model are carefully conducted to determine wind-induced displacements at six levels (each with eight points) with laser displacement sensors. According to the measurement results of wind pressure or vibration response, the extreme aerodynamic loading values of the single or grouped towers are accordingly analyzed based on probability correlation technique.

• 한국공간구조학회논문집
• /
• 제11권2호
• /
• pp.63-70
• /
• 2011

축사는 비닐하우스 다음으로 자연재해에 취약한 농촌시설물이다. 축사의 경우 측벽 없이 지붕만 있는 형태가 가장 많이 사용되고 있는데, 태풍이 불면 지붕 전제가 날아가 많은 피해가 발생하는 실정이다. 그래서 농가에서는 태풍피해예방을 위한 측벽에 윈치 커튼설치하여 피해를 예방하고 있는 실정이다. 본 논문에서는 측벽 개방에 따른 축사지붕에 위치별 풍압 계수 분포특성에 대해서 알아보고자 한다. 측벽유무에 관계없이 축사지붕면의 피크외압계수분포에서 풍향각 $0^{\circ}$로 불어오는 방향에 대해서 불리하게 작용하고 있는 것을 알 수 있다. 그러나 측벽의 유무에 따라 피크외압계수가 풍향각과 처마의 길이에 영향을 받는 것을 확인할 수 있었다.

• 혜화의학회지
• /
• 제8권2호
• /
• pp.171-189
• /
• 2000

By Literatural studying on migraine, The results were obtained as fallow : 1. A different name on migraine were called hemicrania(頭偏痛, 邊頭痛, 偏頭風). 2. In the cause of a disease in migraine, the cases were clasified into the fallowing kind : internal cause were a decline in energy and blood(氣血具虛), external cause were outside evil(外邪) in wind cold heat wetness(風寒暑濕), non internal, external cause were exhaustion. The right side migraine were concerned phlegm heat, the right side migraine were concerned wind decline in blood. 3. Migraine is appeared on the side, For the reason, liver function in excess of normal limits(肝陽上亢), a sudden of liver fire(肝火) is becomeed of invasion upon soyangkuong(少陽經) in internal external cause 4. Usage method of medicines is appeared that order underclothes theraphy(內服法), to pump out in nose theraphy, to join head theraphy(頭點法), heating smoke theraphy(熏煙法) 5. CNIDII RHIZOMA(川芎) is in mostly general use for migraine, in that order LEDEBOURIELLAE RADIX(防風) ANGELICAE DAHURICAE RADIX(白芷) ASARI HERBA CUM RADICE(細辛) NOTOPTERYGII RHIZOMA(羌活) GLYCYRRHIZAE RADIX(甘草) CHRYSANTHEMI FLOS(菊花) BUPLEURI RADIX(柴胡) SCUTELLARIAE RADIX(黃芩) ANGELICAE GIGANTIS RADIX(當歸) GYPSUM FIBROSUM(石膏) MENTHAE HERBA(薄荷) GLYCYRRHIZAE RADIX(炙甘草) VITICIS FRUCTUS(蔓荊子), nature is in mostly general hot warm(辛溫), bitter cold(苦寒), guikuong(歸經) is in mostly general liver gall kuong(肝膽經), efficacy is in mostly general to remove wind pain (祛風止痛) and to down fire(瀉火).

• 한국기계가공학회지
• /
• 제20권11호
• /
• pp.9-16
• /
• 2021

As the climate changes rapidly due to warming, it is becoming very important to ensure the stability of environmental structures. It is necessary to choose a material that withstands repeated external forces (wind loads) and satisfies members and joints that have energy absorbing power. Even if the strength of the traffic light attachment is sufficient, if the rigidity is insufficient, there is a limit to the displacement during strong winds. Excessive deformation may cause damage and fall, resulting in a safety accident. The author intends to study mechanical properties and resistance to external environment as a structural material capable of withstanding wind load (50m/sec) by fabricating a C/GFRP composite traffic light attachment using the pultrusion method (Pultrusion).

• International Journal of Aeronautical and Space Sciences
• /
• 제11권4호
• /
• pp.345-350
• /
• 2010

The repetitive vibrating action of an aerodynamic load causes an external fuel tank's horizontal fin to experience a shorter life cycle than its originally predicted one. Store separation analysis is needed to redesign the fin of an external fuel tank. In this research, free-drop tests were conducted using 15% scaled models in a subsonic wind tunnel in order to analyze the store separation characteristics of an external fuel tank. The store separation trajectory based on grid tests was also obtained to verify the results of the free-drop tests. The results acquired from the free-drop tests correlated well with the grid tests in regards to the trajectories and behavior of the stores separated from the aircraft. This agreement was especially noted in the early stages of the store separation.

• 한국태양에너지학회 논문집
• /
• 제24권4호
• /
• pp.27-33
• /
• 2004

Mechanical load measurements on blade and tower of Vestas 100 kW wind turbine has been reformed in Wollyong test site, Jeju island. The experimental procedure for the measurement of wind turbine loads, such as edgewise(lead-lag) bending moment, flapwise bending moment, and tower base bending moment, has been established. The test facilities consisting of strain-gauges, telemetry and T-Mon system are installed in the wind turbine. Strain gauges are on-site calibrated against load cell prior to monitoring the wind turbine loads. Using the test setup, the loads on the components are being measured and analysed for various external conditions of the wind turbine. A set of results for near rated wind speed has been presented in this paper.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 IWAIT
• /
• pp.596-600
• /
• 2009

We are developing a simple low-cost wind velocity sensor based on small microphones. The sensor system consists of 4 microphones covered with specially shaped wind screens, 4 pre-amplifiers that respond to low frequency, and a commercial sound interface with multi channel inputs. In this paper, we first present the principle of the sensor, i.e., technique to successfully suppress the influence of external noise existing in the environment in order to determine the wind velocity and the wind direction from the output from a microphone. Then, we present an application for generating realistic motions of a virtual tree swaying in real wind. Although the current sensor outputs significant leaps in a measured sequence of directions, the interactive animations demonstrate that it is usable for such applications, if we could reduce the leaps to some degree.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.439-442
• /
• 2009

As a result of increasing environmental concern, the penetration of renewable power on power systems is now increasing. Wind energy can be considered as the most economical energy sources to generate electricity without depletion of fossil fuel. The penetration of wind energy from wind farm is getting larger and larger, so we need adequate control strategies for wind farm. To devise adequate control strategies for wind farm, time domain simulation analysis needs to be performed. This presents a Simultaneous Implicit-based time domain simulation algorithm for wind farm with DFAG (Doubly Fed Asynchronous generator) connected to the external power systems. This paper shows an illustrative example with a 5-bus test system.

• 한국항공우주학회지
• /
• 제46권1호
• /
• pp.41-51
• /
• 2018

무장 헬리콥터에서 발사되는 무유도 로켓은 로터 블레이드에 의한 내리흐름과 전후좌우 기동으로 인한 외풍에 의해 전체 궤적 및 사거리가 변화하므로, 내리흐름 효과를 고려하여 무유도 로켓의 궤적을 예측하는 것이 중요하다. 내리흐름 효과를 고려한 무유도 로켓의 궤적 및 사거리를 예측하기 위해, 본 연구에서 여러 외풍 조건에 따른 후류 영역을 Actuator Disk Model(ADM)로 계산하고 6 자유도 (6 DOF) 운동 해석으로 무유도 로켓의 자세 및 전체 비행 궤적을 예측할 수 있는 알고리즘을 개발하였다. 개발된 알고리즘은 ADM 해석 결과를 6 자유도에 반영하여 다양한 초기 발사조건에서 무유도 로켓의 전체 궤적을 예측할 수 있고, 기존 Inflow model을 이용한 내리흐름 해석과는 다르게 동체와의 간섭효과를 고려하여 비교적 정확한 내리흐름 및 다양한 외풍 환경 조건으로 궤적을 예측 할 수 있다. 개발된 알고리즘을 이용하여, 내리흐름 효과에 의한 무유도 로켓의 자세 및 궤적 변화 메커니즘을 유효 받음각 변화와 기수 자세 안정성으로 규명하였다. 그리고 외풍으로 인해 변화하는 내리흐름 효과를 고려하여 무유도 로켓의 궤적변화와 사거리를 계산한 결과, 후방 외풍 시 최대 13% 사거리 증가를 보였다. 사거리 증가의 주요 요인으로 내리흐름 영역과 강도, 부차적 요인으로 외풍과 동체와의 간섭효과, 동압의 크기인 것을 밝혔다. 또한 사거리 변화량이 가장 큰 후방 외풍에서, 후방 외풍의 풍속이 증가함에 따라 로켓의 사거리가 증가하였다. 하지만 특정 후방 외풍 크기 이상에서 더 이상 로켓 사거리가 증가하지 않는 한계를 보였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.370-373
• /
• 2007

For the development of wind turbine, generally simulator is used. Simulator include wind turbine components. e.g blades, pitch and pitching method, rotor, yaw system, tower, drive train and so on. Few the more, it include a external circumstance. e.g wind speed, wind direction, air density. these basic parameters be used for the control of wind turbine by wind turbine controller in wind turbine simulator. The wind turbine controller can be designed in the wind turbine simulator. But a developer must make the real control system that will be made using PLC or PC or other processor. The developer must verify the function of control system. that is control algorithm , I/O function, communication, sequence and so on. This verification is possible if we substitute the real wind turbine control system for wind turbine controller in the simulator.