• Physical Therapy Rehabilitation Science
• /
• v.5 no.4
• /
• pp.210-214
• /
• 2016

Objective: The aim of this study was to measure the muscle architectural parameters of abdominal muscles in healthy individuals by rehabilitative ultrasound imaging (RUSI) and to investigate their changes after bridging exercise in various environments. Design: Cross-sectional study. Methods: The study included 40 healthy participants (19 men, 21 women). Subjects were randomly allocated to a stable surface group (SG, n=20) or an unstable surface group (UG, n=20). The participants assumed three positions in rest, bridging exercise with knee flexion $60^{\circ}$, and bridging exercise with knee flexion $90^{\circ}$ for the measurement of abdominal muscle thickness by RUSI. For the resting position, the participants held the head neutral in a hook-lying position and the dominant side was measured. For contraction, the participants performed the bridging exercise with the knee joint in $60^{\circ}$ and $90^{\circ}$ of flexion for 10 seconds each. Results: For transversus abdominis, external oblique muscle thickness, within the stable surface group and the unstable surface group, no significant contraction difference was observed in both the $60^{\circ}$ and $90^{\circ}$ bridge exercise conditions. Contraction difference of internal oblique muscle was significantly larger at $90^{\circ}$ than at $60^{\circ}$ within the SG (p<0.05). But within the UG, no significant contraction difference was shown. There was no significant contraction difference between the surface group and the unstable SG at $60^{\circ}$ condition and at $90^{\circ}$ condition in all measured muscles. Conclusions: The contraction difference is different for each muscle during bridge exercise with knee flexion $60^{\circ}$ and bridging exercise with knee flexion $90^{\circ}$. Muscle contraction difference is generally large when exercised on an unstable surface than a stable surface, but these are not statistically significant when bridging exercise is performed using dynamic air cushion for unstable surface.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.11 no.4
• /
• pp.139-148
• /
• 2016

The importance of technology commercialization is being emphasized more and more, but high technology excellence does not always lead to a successful business. In addition, companies that invest heavily in basic research and technology development are also not always able to guarantee high profits. This is due to the technical problems when present in step research and development levels are difficult to commercialize. And the market will not work rationally is also the cause of the problem. Therefore, to effectively utilize the resources necessary to ensure such partners to build alliances and cooperation with external funding or manpower is crucial to commercialize the research results of basic science successfully. In previous studies, it has been made many studies in accordance with the approach to the technology (e.g. Research and Development, Management of Technology, Technology Innovation, etc.). But the study of technology commercialization point of view is not being done much. This study should explores the available business required, or realized in the process of researching the basic science and trying to understand the imperfections of the market through the property of technology (tacit knowledge, objectified value of technology and the information asymmetry between innovation subjects, etc.). In addition, this paper, we try to focus on a strategic approach to the role of International Science Business Belt (ISBB) with success in science and technology business as appropriate countermeasures about breaking the 'Valley of Death.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.7
• /
• pp.655-663
• /
• 2017

With the development of ICT technology, the indoor utilization of robots is increasing. Research on transportation, cleaning, guidance robots, etc., that can be used now or increase the scope of future use will be advanced. To facilitate the use of mobile robots in indoor spaces, the problem of self-location recognition is an important research area to be addressed. If an unexpected collision occurs during the motion of a mobile robot, the position of the mobile robot deviates from the initially planned navigation path. In this case, the mobile robot needs a robust controller that enables the mobile robot to accurately navigate toward the goal. This research tries to address the issues related to self-location of the mobile robot. A robust position recognition system was implemented; the system estimates the position of the mobile robot using a combination of encoder information of the mobile robot and the absolute space coordinate transformation information obtained from external video sources such as a large number of CCTVs installed in the room. Furthermore, vector field histogram method of the pass traveling algorithm of the mobile robot system was applied, and the results of the research were confirmed after conducting experiments.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.1
• /
• pp.139-148
• /
• 2009

D. W. HAN. Y. R. AHN., N. J. LEE and E. J. LEE. Effects of Combined Restistance Training Program of Concentric and Eccentric Contraction Using Theraband on Shoulder Rotation Torque Max and Peak Power. Korean Joumal of Sport Biomechanics, Vol. 19, No. 1, pp. 139-148, 2009. The purpose of this study was to find out that combined concentric with eccentric resistance training program using Thera-Band was more effective than only concentric resistance training program on shoulder rotation torque max and peak power. 30 female students were randomly assigned to 3 equal group; concentric and eccentric, concentric, non training group. Subjects were tested in concentric and eccentric torque max and peak power of internal and external rotation using a CON-TERX isokinetic dynamometer. Subjects in training group participated in their regular five times a week for 4 weeks. After exercise, in concentric and eccentric training group, concentric and eccentric torque max, and peak power of internal rotator at 60 deg/sec were increased significantly. concentric peak power at 120 deg/sec were increased significantly. In concentric training group, only concentric peak power of internal rotator at 60 and 120 deg/sec was increased. In conclusion, we found out that combined concentric with eccentric resistance training program using Thera-Band was more effective than only concentric resistance training program on shoulder rotation torque max and peak power.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.1
• /
• pp.1-10
• /
• 2018

It is difficult to predict the early-age cracks of strain restrained concrete members due to environmentally sensitive parameters. A new method is proposed to predict the cracks by test of autogenous deformation and self-induced restrained stress of specimens which simulates early-age crack state by hydration heat of the'Wall-On-Foundation'members. For this purpose, thermal analysis of entire structure considering the environmental condition is performed at first, and the specimens are set up where hydration heat was electronically controlled according to the analysis results. By measuring free deformation and force to compensate the autogenous strain including relaxation, feasibility of cracks can be estimated. The proposed method can predict the occurrence of cracks better than the material test of the early age concrete which has large variance. The method of this study is particularly useful when it is used as a preliminary experiments to predict the crack more precisely before full-scale concrete placement in construction of large structures.

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.7
• /
• pp.39-50
• /
• 2013

Crib wall is one of the segmental grid retaining walls using headers and stretchers to establish the framework of the wall. In this method, grids formed by the intersection of headers and stretchers are generally filled with the gravel to maintain the weight of the wall. Therefore, the construction can be carried out with higher speed and much economically when compared with the concrete retaining wall. Furthermore, it has high drain capacity, and environmentally friendly aspects also have been pointed out because the possibility of the planting at the front of the wall. However, in the wooden crib wall method, the relative movement between the individual headers and stretchers was generally recognized, and stress redistribution in the gravel filling was also observed when subjected to the external loading and self-weight of filling. In this study, it was analyzed fracture types and causes of wooden crib wall through detailed investigation and analysis of a large crib wall construction site. As a results, it occurred the damage in the members of 5.7% in a total of 2,315 locations and the damage of header occurred in the members of a header 80.2%. The 65.7% of the damaged header are concentrated in the lower part of crib wall. Therefore, it was analyzed the differences of fracture types and causes of wooden crib wall depending on the installation position and the kinds of members. It is considered basically the members of various forms of distortion and the grain affecting.

• Journal of Korea Technology Innovation Society
• /
• v.15 no.2
• /
• pp.242-261
• /
• 2012

Early stages of technology valuation have been often overlooked or under-represented. The early stage technologies are even riskier due to their inadequacy of commercial development and market applicability. More than 95% of patents fail to earn any revenues so that the majority of patents were valueless. Technology transfers from laboratories at universities and research institutes to industrial firms have increased to acquire value from invented technologies. Technology transfer, a process of transferring discoveries and innovations resulted from research to commercial sectors, typically comprises several steps: disclosing the discoveries and innovations, i.e., intellectual property (IP), evaluating the IP's economic prospects, securing a patent, copyright or trademark for the IP, commercializing the technology through licensing, forming a joint venture, or selling. At each of those stages in the research and development of technology, the value of technology would play a very important role of making decision on the movement toward the next step, however, the financial value of technology is not easy to determine due to a great amount of uncertainty in the course of research and development, and commercialization. This paper refers to technology embodied as devices, equipment, software or processes primarily developed at public research institutions such as universities. Sometimes it is also as the result of externally financed projects contracted with industry. Nearly always technology developed at public research entities results in laboratory prototypes. When it is required to define the technology transfer contract terms for the license of the university patrimonial rights to external funding companies or other interested parties, a question arises: what is the monetary value? In this paper, we present a method for technology valuation based on the identification of specific value points related to its development. The final technology value must be within previously defined value limits. This paper consists of the review of issues related to technology transfer and commercialization, the identification of characteristics of technologies in the early stage of technology development, the formulation of framework of methods to value the early stage technologies, and the conclusion and implication of the previous review.

• Journal of the Korean Magnetics Society
• /
• v.18 no.1
• /
• pp.1-8
• /
• 2008

We have manufactured and evaluated reference samples for the use of low magnetic moment measurements. Before the measurements, SQUID magnetometers were magnetically shielded from external magnetic noise. We considered the purity including magnetic impurities, the optimum thickness, the modification method, and the shape in the preparation of the samples. Three paramagnetic polycrystaline metal plates of Ti, W, and Al with the area of $4mm{\times}6mm$ were prepared finally. The magnetic moments of these three samples are measured very linear up to the field of 5 T without magnetic hysteresis. The temperature deviated ratios of the magnetic moments for Ti, Al, and W from 290 K to 310 K are 0.7, 1.5, and 0.1 %, respectively. The measured magnetic moments for Ti and W samples by our research team are very well agreeable with those by two SQUID magnetometers and a VSM at Quantum Design via international round robin test. The results suggest that the prepared reference samples are well suited for the use in the low magnetic moment measurement with SQUID based magnetometers.

• Korean Journal of Food Science and Technology
• /
• v.37 no.5
• /
• pp.736-740
• /
• 2005

As an alternative of yeast, various concentrations to prepare hypo-allergenic bread (HAB). Addition of sodium bicarbonate increased $CO_2$ emission, but at higher than 2.0% caused bitter taste compared to other mixtures. Addition of sucrose significantly increased $CO_2$ emission. HABs 7 ($NaHCO_3$ 2.0g+sucrose 0.63 g) and 8 ($NaHCO_3$ 2.0g+sucrose 1.0g) showed higher grain and color scores. HAB 5 ($NaHCO_3$ 1.5g+sucrose 1.0g) and 6 ($NaHCO_3$ 1.5g+sucrose 2.0g) gave higher aroma and taste scores. HAB 5 showed significantly higher overall acceptability (p<0.05) score than others, whereas HABs 7 and 8, regardless of high external sensory qualities, showed lower overall acceptabilities than HAB 5 due to bitter taste. Prototypical HAB was obtained using wheat flour (100g) and water (62mL) incubated at $37^{\circ}C$ for 4 hr for treatment of b.p pretense (100mg) before adding sodium bicarbonate (1.5%), sucrose (1.0%), NaCl (1.0%), and citric acid (1.0%).

• Journal of the Economic Geographical Society of Korea
• /
• v.12 no.4
• /
• pp.438-453
• /
• 2009

Attracting advanced foreign enterprises into the less-developed regions has gained increasing importance as a regional development strategy in Korea. This study critically examines the foreign-direct investment-led regional development strategy of Wales, United Kingdom. Despite a high FDI inflow in manufacturing, the Welsh regional economy has suffered from specialization in low-skilled assembly with limited R&D activities, insufficient linkage with local domestic suppliers, and violent fluctuation in local employment in response to changes within the global business environment. This tendency shows that the foreign-invested companies have neither locally embedded themselves enough nor created the external agglomeration economies in the region. At the same time, the Welsh local government's excessive dependence on financial incentives packages to induce multinationals, rather than effort to create regional innovative capacity, has resulted in a sizable fiscal loss, an abused local planning process, and subordination of the local government's major administrative decision-making on foreign investors. The Welsh FDI case suggests that an effective FDI attraction policy should include inter-regional cooperation and coordination in the inward investment attraction procedure, a comprehensive land use planning process, and state-level concrete governance on FDI.