• 방사성폐기물학회지
• /
• 제13권4호
• /
• pp.271-282
• /
• 2015

외부비용은 재화나 서비스가 생산 또는 소비되는 과정에서 제3자에게 부과되는 비용이다. 원자력 발전을 통한 전력생산에도 외부비용이 발생하며 이들에 대한 연구가 1990년대부터 진행되어 왔다. 비용은 정책결정에 중요한 요소로 전력 생산에 대한 비용 비교를 위해 외부비용이 고려되고 있다. 핵연료주기에서도 선택에 따라 다른 외부비용이 발생되지만 이에 대한 연구는 진행되고 있지 않다. 본 연구에서는 핵연료주기 외부비용 평가 방법 개발을 위해 원자력 발전에 대한 외부비용 평가방법을 조사하고 분석하였다. 후쿠시마 사고 이전에는 외부비용 연구들은 정상 운전 상태에서의 손상 비용에 초점을 두었다. 그러나 사고 이후 사고비용이 주요 주제가 되었다. 사고비용을 포함한 외부비용 범위는 여러 연구들에서 다양하게 사용되었으며 범위에 맞춰 다른 방법들이 적용되었다. 본 연구에서는 이러한 결과들이 비교되었으며 핵연료주기에 따른 외부비 용 추산에 방법적 적용성 판단을 위해 분석되었다.

• 방사성폐기물학회지
• /
• 제13권4호
• /
• pp.243-251
• /
• 2015

국내 원자력발전은 현재 두 번째로 큰 전력 공급 방법이며 원전의 수 역시 증가되는 것으로 계획되어 있다. 그러나, 원자력발전에 의해 발생되는 사용후핵연료에 대해서는 아직 명확한 관리 정책이 확립되어 있지 않다. 원자로 이 후 핵물질 흐름과 관련된 후행 핵연료주기는 사용후핵연료 관리를 위한 기술들의 집합이다. 따라서, 사용후핵연료 관리 정책은 핵연료주기 선택과 함께한다. 핵연료주기 선택의 중요 항목은 경제성으로 이는 사적비용과 함께 외부비용을 더해 결정되어야 한다. 직접비용 인 사적비용과 달리 간접비용인 외부비용에 대한 연구는 원전에 집중되어 있으며 핵연료주기에 대한 연구는 없는 상황이다. 본 연구에서는 핵연료주기에 적용할 수 있는 외부비용 항목들을 도출하고 정량화를 시도하였다. 핵연료주기 외부비용 평가를 위해 고려될 수 있는 핵연료주기로 OT(직접처분), DUPIC(PWR-CANDU 연결), PWR-MOX(PWR 습식재처리), Pyro-SFR (파이로 처리와 고속로 연계)의 네 가지를 선정하였다. 원자력발전의 외부비용 평가에 고려되었던 항목들을 분석하여 핵연료주기에서 에너지 공급 안보비용, 사고위험비용과 수용성 비용을 외부비용 항목으로 도출하고 추산하였다.

• 자원ㆍ환경경제연구
• /
• 제22권2호
• /
• pp.367-391
• /
• 2013

후쿠시마원자력발전소의 사고를 계기로 원전의 안전대책비용, 사고위험대응비용과 같은 외부비용들의 존재가 부각되고 있다. 이에 본 연구는 원전의 외부비용들 중에서 추가안전대책비용과 사고위험대응비용을 추정하고, 이를 발전원가 및 전기요금에 반영하여 변화정도를 살폈다. 원전의 추가안전대책비용은 70~90%의 이용률에서 0.53원/kWh~0.80원/kWh으로 원전의 발전원가에 큰 영향을 미치지는 않는다. 사고위험대응비용은 원전사고피해규모별, 사고발생빈도별, 이용률별로 0.0025원/kWh~26.4188원/kWh로 추정되었다. 사고위험대응비용을 포함시키면 원전발전원가는 47.58원/kWh~85.92원/kWh가 된다. 2011년을 기준으로 사고위험대응비용을 내부화한 경우의 전기요금의 증가율은 70~90%의 이용률에서 0.001%~10.0563% 로 추정되었다. 본 연구는 원전의 외부비용을 내부화하는 방법으로서 외부비용을 발전원가에 포함하여 전기요금에 반영하였다. 본 연구는 지금까지 우리나라에 논의되지 않았던 원전 외부비용을 내부화하는 방법의 하나가 될 것이다.

• 대한안전경영과학회지
• /
• 제13권2호
• /
• pp.185-193
• /
• 2011

The successful and sustainable growth of SMEs depends on their ability of strengthen their competitiveness in quality and cost and service more than anything else as a fundamental of operation. Among these key competitive factors of SMEs, quality is the most critical factor in manufacturing business fields. There are many different ways to improve the quality performance but it needs proper management decision to choose the best way what can maximize outputs with minimum inputs. And it needs effective measurement methods and some indicators to analysis the quality performance properly. The quality cost is one of the simplest key indicators to measure the quality performance and the effectiveness of quality related management decisions. In this study, through survey on local SMEs, we found that their average annual quality cost ratio versus turnover - total amount of annual quality cost divided by annual turnover - is around 3.69% excluded some SME's performances what have different quality control measures with others. And we found some results what corresponded with the early studies on the correlations between those categorized quality costs factors and some discrepancies between some of the literature model and the early case study results as follows. There were negative correlations between the Prevention costs and the External failure costs, and the Appraisal costs and the External failure costs, and there was positive correlation between the Appraisal costs and Internal failure costs same as early studies. But, we couldn't found any strong negative correlations between the Cost of control - Prevention costs & Appraisal costs - and the Cost of Failure of control - Internal & External failure costs -.

• 한국조리학회지
• /
• 제22권8호
• /
• pp.78-88
• /
• 2016

This study conducted to find influences of selection attributes on consumer satisfaction as perceived by low-cost restaurant visiter by considering personal value. Developed survey was distributed and 428 sample who visited the low-cost franchise restaurant were employed the statistical analyze. The internal value and the external value included individual value in order to estimate the influence of the choice factor of the low-cost franchise restaurant on the quality of the product, and the choice factors were consisted of 3 variables that are quality, accessibility and service. Regression analysis was conducted to verify the relationships among the variables. As a result, the internal value (${\beta}=.236$, p<.0.01), and external value (${\beta}=.352$, p<.001) have the significant positive relationships with respect to quality. Second, the external value (${\beta}=.305$, p<.001) has the positive relationship with regard to accessibility, but the internal value has no significant relationships with level of accessibility. Third, the internal value (${\beta}=.828$, p<.001) has the significant positive relationship with regard to service, but there was no significant influences between external value and service in this study. Fourth, the internal value (${\beta}=.472$, p<.001), the external value (${\beta}=.479$, p<.001) were critical antecedents of the quality. Last, while quality (${\beta}=.858$, p<.001) has significant positive relationship with satisfaction, but it didn't show any relationships with accessibility and service.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 춘계학술대회 논문집
• /
• pp.76-82
• /
• 2001

The ASME B3l.4〔1〕and B3l.8 〔2〕codes use the thin wall formula to predict hoop stress in a pipe. To account for the external pressure, the above codes simply subtract the external pressure from the internal pressure. The thin wall formula using this differential pressure does not give the same hoop stress as the thick wall formula. This paper proposes an improved equation to predict pipe hoop stress subjected to both internal and external pressure. Compared to the conventional thin wall formula, the improved formula has additional terms, which improve the agreement with the thick wall formula and account for external pressure. The improved formula is less conservative than the conventional thin wall formula, but slightly more conservative than the thick wall formula. The formula is simpler and easier to use than the thick wall formula and will save pipe material cost as well as installation cost compared to using the conventional thin wall formula. The savings will increase as the water depth increases.

• Journal of the Optical Society of Korea
• /
• 제15권3호
• /
• pp.227-231
• /
• 2011

An external optical modulation using absorption s in a Fabry-Perot laser diode (FP-LD), has been proposed and experimentally demonstrated for multicasting in a WDM-PON. The center wavelengths of absorption s in an FP-LD move to short-wavelength rapidly by only a small current (~1 mA) injection. If the current injection is stopped, the s move back to the original position. Such a movement of the s can make the FP-LD act as an external optical modulator, which is found to modulate at a maximum modulation speed of 800 Mbps or more. For a multicasting transmitter in a WDM-PON, the proposed modulator can be cost-effectively applied to a multi-wavelength laser source with the same periodicity of the longitudinal mode. Instead of the multi-wavelength laser source, tunable-LDs are used for experiments. The 32 channel multicasting system with the proposed modulator has been demonstrated, showing power penalties of 1.53~4.15 dB at a bit error rate of $10^{-9}$ with extinction ratios better than 14.5 dB at 622 Mbps.

• 한국유기농업학회지
• /
• 제18권1호
• /
• pp.1-19
• /
• 2010

This paper evaluates potential environmental impacts and external costs on rice production of Korea. The investigation is based on LCA in agricultural area which estimates inputs and outputs of rice production system in quantitative way. The results show that environmental impacts on organic rice(4.49E-08 DALY/kg) is level on 4.5% out of conventional rice(9.97E-07 DALY/kg). The external costs of organic and conventional rice are 4.04won/kg and 89.52won/kg respectively. The balance of both organic and conventional rice which is 85.48won/kg represents monetary value on improvement of environmental effects as producing organic rice.

• 산업경영시스템학회지
• /
• 제24권63호
• /
• pp.89-99
• /
• 2001

This paper proposes assessment of quality management activities based on cost of quality. Cost of quality is considered prevention cost, appraisal cost, internal failure cost, external failure cost in this paper. This paper shows quality cost magement system in thermal power site devision according to activity analysis. Cost of quality in power industries provides a valuable method of both proving the need for improvement and giving a starting point for projects.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 추계학술대회 논문집
• /
• pp.68-76
• /
• 2000

Reliable external cost must be estimated to achieve the optimal market share between transportation modes. In this paper, we determined the market share between railroad and road on the cost minimization base. The results show that optimal market share is achieved by increasing investment on railroad.