• Journal of the Korean Wood Science and Technology
• /
• v.42 no.6
• /
• pp.732-739
• /
• 2014

This research was performed to investigate the effect of recent climate changes on wood decay hazard index (Scheffer index) in Korea. The index was determined using a climate data of 58 different locations obtained from the website of Korea Meteorological Administration (KMA), and the wood decay hazard index was determined at the intervals of 10 years. Most of regions in Korea except Juju island showed wood decay hazard index values between 35 and 65, considered to be moderate decay hazard zones. But in recent 10 years (2003~2012), the wood decay hazard index was rapidly increased, resulting in showing many high decay hazard regions. The trend may be explained by the in crease of temperature and precipitation. The recent climate change of Korea turning into the weather of subtropical region may explain the increase of wood decay hazard index.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.1
• /
• pp.1-11
• /
• 2009

Although the exterior wood such as column may frequently contact with liquid water, little work has been found to measure liquid water absorption in wood. To investigate the moisture diffusivity of wood in the longitudinal direction including bound water and free water movement, liquid water absorption test was conducted at the room temperature. The order of magnitude for absorption coefficient and diffusivity was Japanese elm, horn beam, hemlock, spruce, radiata pine, and painted maple. The Boltzmann transformation method was used to determine the diffusivity from measured moisture content distributions in the absorption test. The shape of the curve representing the dependence of diffusivity with moisture content was similar in test samples. The diffusivity decreased with increasing moisture content until around the fiber saturation point and then increased at the nonhygroscopic region, which ranged from $10^{-10}$ to $10^{-7}m^2/s$.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.3
• /
• pp.27-35
• /
• 2007

The majority of farm managers growing the garden products in greenhouse concern massively about the diagnosis and prevention of the breeding and extermination for pests. especially, the managing problem for pests turns up as main issue. In the paper, we first build a wireless sensor network with soil and environment sensors such as illumination, temperature and humidity. And then we design and implement multimedia pest predication and management system which is able to predict and manage various pest of garden products in greenhouse. The proposed system can support the database with information about the pests by building up wireless sensor network in greenhouse compared with existing high-priced PLC device as well as collect various environment information from soil, the interior of greenhouse, and the exterior of greenhouse. To verify the good capability of our system, we implemented several GUI interface corresponding desktop. web, and PDA mobile platform based on real greenhouse model. Finally, we can confirm that our system work well prediction and management of pest of garden products in greenhouse based on several platforms.

• Journal of Korean Medical classics
• /
• v.28 no.2
• /
• pp.33-45
• /
• 2015

Objectives : Through the study on Byeokyeoksinbang(辟疫神方), it would be expected to analyze Dokyeok(毒疫)'s characteristic and to comprehend how the changes in viewpoints of epidemic febrile disease were made. Methods : It has been done to analyze the original text of Byeokyeoksinbang(辟疫神方), and to compare the theory of Onbyeongjobyeon(溫病條辨) associated with the signature symptom of Dokyeok(毒疫). Results : Heo Jun(許浚) experienced a specific epidemic disease called 'Dokyeok(毒疫)', on which he made observations and analyzed its features and wrote Byeokyeoksinbang(辟疫神方). In Byeokyeoksinbang(辟疫神方), 'Dokyeok(毒疫)' is characterized by rash[疹], its pathogenesis is warm temperature, thus its treatment principle is removing interior and exterior heat. The book's pragmatic perspective is highly appreciated, as HeoJun improved and solidified existing medical knowledge up to date. In addition, Byeokyeoksinbang(辟疫神方) is significant in that it differentiated between macula[癍疹] and rash[疹], much earlier than the febrile disease school of the Qing dynasty. Conclusions : Between Byeokyeoksinbang(辟疫神方) and Onbyeongjobyeon(溫病條辨), there are differences in treatments and patterns of rash[疹]. Based on this, it will be able to compare each disease that is written in two books. And a study on comparing the development between epidemic febrile disease[瘟疫學] of the Joseon dynasty and febrile disease[溫病學] of the Qing dynasty will be carried out with a follow-up study.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.39 no.3
• /
• pp.72-82
• /
• 1997

In all inelastic deformations time rate effects are always present to some degree. Whether or not their exclusion has a significant influence on the prediction of the material behaviour depends upon several factors. In the study of structural components under static loading conditions at normal temperature it is accepted that time rate effects are generally not important. However metals, especially under high temperatures, exhibit simultaneously the phenomena of creep and viscoplasticity. In this study, elastoplastic and elasto-viscoplastic models include nonlinear geometrical effects were developed and several numerical examples are also included to verify the computer programming work developed here in this work. Comparisons of the calculated results, for the elasto-viscoplastic analysis of an internally pressurised thick cylinder under plane strain condition, have shown that the model yields excellent results. The results obtained from the numerical examples for an elasto-viscoplastic analysis of the Nuclear Reinforced Concrete Containment Structure(NRCCS) subjected to an incrementally applied internal pressure were summarized as follows : 1. The steady state hoop stress distribution along the shell layer of dome and dome wall junction part of NRCCS were linearly behave and the stress in interior surfaces was larger than that in exterior. 2.However in the upper part of the wall of NRCCS the steady state hoop stress in creased linearly from its inner to outer surfaces, being the exact reverse to the previous case of dome/dome-wall junction part. 3.At the lower part of wall of NRCCS, the linear change of steady state hoop stress along its wall layer began to disturb above a certain level of load increase.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.3
• /
• pp.55-60
• /
• 2009

This paper deals with the analysis of characteristics of the scale non-uniformly formed on the surface of the steel during the steel production processes. The steel made at the high temperature contacts with the oxygen in the air, so forms the scale immediately. The scale has a role to protect the surface of the steel product as a oxide-layer, but the scale formed non-uniformly spoils the exterior of the steel product and occurs the problems about the next processes. There is a pickling process to remove the scale of the steel products, but the real situation is that the pickling process is not also based on the analysis of the characteristics of the scale. Therefore, this paper describe the procedures of the analysis of the scale more effectively using the radio-frequency wave. Using the radio-frequency wave, this paper introduce the experimentations to analyze the distributions of scale, the junction characteristics between the surface of steel and scale and the distributions of scale on the produced steel coil. Also, according to the simple simulations, this paper proves the proprieties about the above contents.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.8
• /
• pp.2015-2020
• /
• 2009

$NO_x$ reduction of stationary exhaust was performed at atmospheric condition and the temperature ranging from $200^{\circ}C$ to $500^{\circ}C$ over ZSM-5 supported metal catalyst. The characteristics of the prepared catalysts were investigated using the analytical techniques such as SEM, XRD, EDX, ICP and ITR. The results of EDX and ICP analysis demonstrated that the most part of transition metal existed on the exterior surface of support. Maximum de-$NO_x$ yield over Fe/ZSM-5 shown between $380^{\circ}C$ and $400^{\circ}C$ was presumed to be due to the maximum H2 reduction rate at $400^{\circ}C$ of ITR.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.4
• /
• pp.119-127
• /
• 2013

In cases of wooden structure and wooden house installed on the outside, metal goods used for basic connection are usually screw bolts, strainless nails and general iron nails. As metal connections on wood are directly exposed to exterior environment, friction resistibility of nails on metal connections declines and continual defects on this are generated and maintenance for it is required. However, experiments and analyses for preparing basic data for improvement of the problems have been not conducted so far and wooden structures with defects are abandoned. Accordingly, by analyzing friction resistibility of connections by each kind of woods and metal goods, the study aims to suggest to use metal goods appropriately by kinds of woods and manufacture conditions with analysis on characteristics of resistibility of extracting nails for solving such problems and to secure basic data for establishing maintenance, repair and reinforcement plans.

• Fire Science and Engineering
• /
• v.24 no.1
• /
• pp.40-45
• /
• 2010

Asymmetric Slimflor Beam had been unveiled with Thor beam (Hat beam) in Sweden since the late 1970s and had been developed by British Steen and SCI. In the major advanced countries in Europe after the early 1990s have interested in and developed this method, it has been concrened as the absence of hot-rolled section steel in the United Kingdom and welded of asymmetric section steel in Finland in the 2000s. It can be increase total floor area about 10%, save the interior and exterior materials, reduce the waste through reduction of the floor height. And it has more excellent fire resistance performance because less exposed than a regular composite steel beam in fire. This study is purpose that, a fire resistance performance of the Asymmetric Slimflor Beam in fire, it compared the temperature range with deflection of structure by fire behavior and load ratio of structure through change the shape of the steel cross-section in standard fire condition.

• Design & Manufacturing
• /
• v.13 no.3
• /
• pp.35-40
• /
• 2019

As the consumer market in the cosmetic, vehicle manufacturing and aerospace industries grows, the demand for manufacturing industries using on injection mold technology. Also, such manufacturing technology of metal machining is expensive, and the shape is limited. Cosmetic cushion fact products are divided into outer relevant to the exterior of the product and inner containers containing the actual contents. In the case of the inner container, it needs to be combined with the upper and lower cases. As environmental regulations are strengthened internationally, the use of a large number of component parts can result in significant losses in recycling and economics. Therefore, this study aims to perform injection molding analysis through injection molding simulation to develop a cushion fact container that can be recycled through the unification of products and materials using polypropylene to cope with environmental regulations. In the case of injection molding conditions, Injection Time(sec): 4.5, Cooling Time(sec): 13, Resin Temperature($^{\circ}C$): 240, and Pressure(MPa): 30 were determined. The results of injection molding simulation according to the two design methods were compared with the sync mark which shows the problem of filling and injection molding.