• 한국지반환경공학회 논문집
• /
• 제11권3호
• /
• pp.53-62
• /
• 2010

1990년대 초 쏘일네일링 공법이 국내에 처음 도입된 이후 쏘일네일링 공법은 사면안정 및 지반굴착의 보강공법으로 널리 쓰이고 있으며, 쏘일네일링 공법의 적용이 확대됨에 따라 초기의 쏘일네일링 공법에 대한 여러 가지 개선된 쏘일네일링 공법도 발달하였다. 최근에 많이 쓰이는 쏘일네일 공법들은 크게 그라우트에 대한 개선 공법과 쏘일네일 자체에 대한 개선 공법으로 분류된다. 그라우트에 대한 개선공법으로는 대표적으로 가압그라우팅 공법을 들 수 있으며, 쏘일네일 자체에 대한 개선공법으로는 자천공 쏘일네일 공법, 제거식 쏘일네일 공법 등과 더불어 본 연구의 대상이 되는 확장그라우팅 공법이 있다. 본 연구에서는 확장그라우팅 공법의 인발거동 특성을 평가하기 위하여 3차원 유한차분 해석을 수행하였다. 수치해석 결과를 통하여 확장그라우팅 공법이 적용된 쏘일네일링의 인발거동특성에 대하여 기술하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.1068-1075
• /
• 2009

The Soil-nailing installed to the slope or the vertical excavation surface shows reinforce effect using frictional resistance between ground and grout. This friction is showed the more the shape of grout is rough, the more efficient.. This study is about the characteristic behavior of Soil-nailing has partial extension grout made artificially control. In this study, we refer to the new boring machine that can make partially extended grout and perform 3D analysis between of the partial extended grout and the general grout of a cylinder shape using the finite element method for comparing.

• Geomechanics and Engineering
• /
• 제21권2호
• /
• pp.207-213
• /
• 2020

Umbrella Arch Method (UAM) often employed in the tunnel construction under poor rock mass conditions in Korea. Insertion of steel pipes at the periphery of the tunnel and infiltration of grouts along the pipes into the rock masses increases tunnel stability. There are two major effects of grouts expected at the tunnel face: 1) increase of face stability by enhancing the frictional resistance of discontinuities and 2) decrease of permeability along the rock masses. Increase of resistance and decrease of permeability requires a certain curing time for the grout. In Korea, we require 24 hours for curing of grout, which means no progress of excavation for 24 hours after infiltration of grouts. This step delays the tunnel construction sequences. To eliminate such inefficiency, we propose MTG (Method for Tunnel construction using Grouting technology), which uses extended length of steel pipes (14 m) compared to conventional pipe roof method (12 m). The merit of MTG is the reduction of curing time. Because of the approximately 2 m extension of the length of steel pipe, blasting can be done after infiltration of grouting. For this paper, we conducted experiments on the shear strength behaviors of grout infilled rock joint with elapsing of curing time and blasting induced vibration. The results show that blasting induced vibration under MTG does not influence the mechanical features of grout material, which indicates no influence on the mechanical behaviors of grout, contributing to the stability of tunnels during excavation. This result indicates that MTG is a cost effective and fast construction method for tunneling in Korea.