• Journal of Advanced Marine Engineering and Technology
• /
• 제24권6호
• /
• pp.24-33
• /
• 2000

This paper investigates the relationship between J-integral and crack tip opening displacement, ${\delta}_t$ using Gordens results of numerical analysis. Estimation were carried out for several strength levels such as ultimate, flow, yield, ultimate-flow, flow-yield stress to determine the influence of strain hardening and the ratio of crack length to width on the $J-{\delta}_t$ relationship. It was found that for SE(B) specimens, the $J-{\delta}_t$ relationship can be applied to relate J to ${\delta}_t$ as follows $J=m_j{\times}{\sigma}_i{\times}{\delta}_t$ where $m_j=1.27773+0.8307({\alpha}/W)$, ${\sigma}_i:{\sigma}_U$, ${\sigma}_{U-F}={\frac{1}{2}} ({\sigma}_U+{\sigma}_F$), ${\sigma}_F$, ${\sigma}_F}$ $Y=({\sigma}_F+{\sigma}_Y)$, ${\sigma}_Y$

• 한국대기환경학회지
• /
• 제32권1호
• /
• pp.57-66
• /
• 2016

Aerosol optical thickness (AOT) and ${\AA}ngstr{\ddot{o}}m$ exponents were monitored at the KIU site ($N35.91^{\circ}$, $E128.80^{\circ}$) during the continuous observation period of 5 November 2010~19 March 2013 using a Microtops-II handheld munti-wavelenth radiometer. Comparisons of AOT values from the Microtops-II with the Sun-sky radiometer data from the Aerosol Robotic Network (AERONET) showed very good agreements: correlation coefficients are lies between 0.98 and 0.99, slopes range from 0.98 to 1.01, and intercepts are smaller than 0.008 at five wavelengths (380 nm, 440 nm, 500 nm, 675 nm, 870 nm). During the observation period, the Microtops-II AOT and ${\AA}ngstr{\ddot{o}}m$ exponents are ${\tau}_{500}=0.560{\pm}0.351$, ${\alpha}_{500-870}=1.135{\pm}0.445$. Fine mode aerosols appear to dominate in the study region with significant contributions from small particles.

• Journal of Biosystems Engineering
• /
• 제14권3호
• /
• pp.158-167
• /
• 1989

This study was conducted to investigate the applicability of true model theory in a powered lugged wheel-soil system and to examine the possibility of using principles of similitude in investigating the dimensions of soil parameters pertinent to a powered lugged wheel-soil system concerning the sinkage prediction. The following conclusions were derived from the study; 1) The sinkage of prototype wheels proved to be predicted by those of the model wheels for the range of the dynamic weight tested. 2) A conditional equation which can be used for the prediction of sinkage of prototype by model test was derived as $n_f=n{_\ell}{^{-b}}$. The range of the numerical value of b, which is the exponent on the length dimension of the soil property ${\alpha}$, was found to be -1.48~-2.54. 3) Considering a relatively wide variation of b values, it was concluded that there are several soil properties which are pertinent to the powered lugged-wheel soil system concerning the sinkage prediction.

• 한국재료학회지
• /
• 제15권11호
• /
• pp.722-729
• /
• 2005

The electrical and dielectric stability of zinc oxide-based varistors were investigated with the cobalt oxide contents in the range of $0.5\~5.0 mo\l%$. As cobalt oxide contents increased, the ceramic density increased in the range of $5.25\~5.55g/cm^3$ and the varistor voltage decreased in the range of $235.3\~86.0V$. The varistor with on addition of cobalt oxide $1.0 mol\%$ exhibited good nonlinearity. in which the nonlinear exponent is 66.6 and the leakage current is $1.2{\mu}A$. Furthermore, the varistors exhibited the highest electrical and dielectric stability, with $\%{\Delta}V_{1mA}=-1.9\%,\;\%{\Delta}{\alpha}=-10.5\%,\;\%{\Delta}I_L=+275.0\%,\;and\;\%{\Delta}tna{\delta}=+55.6\%$, under DC accelerated aging $0.95V_{1mA}/150^{\circ}C/24h$.

• Clinical and Experimental Pediatrics
• /
• 제45권9호
• /
• pp.1114-1119
• /
• 2002

목 적 : 본 연구는 신경심장실신발작 환자의 일상생활에서의 심박수의 단기 및 장기 프랙탈 상관의 특성을 조사하고자 하였다. 방 법: 최소한 2회 이상의 실신이 있었던 25명의 환자(10-15세, 여 14명, 남 11명)를 대상으로 하였다. 24시간 홀터 테입을 정상재생속도의 230배 고속으로 재회전 시키면서 이를 460 kHz로 디지털 변환시켰다. 변환된 심전도를 1시간 단위로 자른 다음 RR간격을 측정하였다. 1시간의 RR interval(RRI) 자료 중 연속된 20,000개를 추출하여 분석하였다. 프랙털 상관을 정량화하기 위해서 detrended fluctuation analysis를 이용하여 단기간 프랙탈 상관지수($n{\leq}16$, ${\alpha}_1$)와 장기간 프랙탈 상관지수(n>16, ${\alpha}_2$)를 계산했다. 결 과: 대조군과 비교할 때, 실신환자에서 단기간 프랙탈 상관지수인 ${\alpha}_1$는 24시간 평균과 모든 6시간 대에 걸쳐 의미있게 증가되어 있었다. 반면 장기간 프랙탈 상관지수인 ${\alpha}_2$는 24시간 평균과 모든 6시간대에 감소되어 있었으나 통계적 의의는 24시간 평균과 0-6시에서만 있었다. 결 론 : 실신이 있는 소아의 심박수는 단기적 상관은 높고 이것은 일중 전체에 걸쳐 나타난다. 따라서 단기적으로 심박수는 정상소아보다 부드러운 거동을 보인다. 이것은 심박수가 일단 증가하거나 감소하면 단기간에서는 같은 방향으로 지속적 증가 또는 지속적 감소되는 경향이 있음을 나타낸다. 이것은 실신소아에서 실신발작 때 보이는 지속적인 심박수 감소가 일상생활에서의 지속적 심박수 감소와 관련됨을 시사한다.

• 한국지구과학회지
• /
• 제26권8호
• /
• pp.790-799
• /
• 2005

본 연구에서는 충청남도 공주시에 위치한 공주대학교 자연과학대학 옥상에 설치된 분광복사측정기의 일종인 스카이라디오미터(Sky-radiometer)로 측정된 직달 및 산란 일사량을 이용하여 간접적으로 공주지역의 에어로솔의 광학적 특성을 분석하였다. 분석기간은 2004년 1월부터 12월까지이며 에어로솔의 광학적 특성의 분석에 활용된 알고리즘은 Skyrad.pack.3(Nakajima et al., 1996)이다. 주요 분석요소는 에어로슬의 광학두께(AOT), 단일 산란알베도(SSA), 옹스트롬 지수${\alpha}$ 및 에어로솔의 크기별 분포이며 분석결과의 질을 높이기 위하여 초기 관측 자료의 품질검사를 수행하였다. 공주지역의 연평균 AOT, ${\alpha}$ 및 SSA는 각각 0.46, 1.14, 그리고 0.91이며 계절 및 기상현상에 따라 큰 시간변동을 보이고 있다. 크기별 입자분포에서는 미세입자와 조대입자에서 최대치가 나타나는 쌍봉(bi-modal) 형태를 보이고 있으며 황사(Asian dust) 기간인 봄에는 조대입자의 총 부피가 크게 증가하고 여름에는 반대로 미세입자의 부피가 증가하는 계절변동을 보이고 있다. 이러한 현상은 봄철동안에 AOT와 SSA가 각각 크게 증가하고 감소하는 점에서도 확인되고 있다. 또한 공주지역의 에어로솔의 광학적 특성은 계절에 따라서 변화가 크게 나타나고 있으나 풍향의 영향은 거의 받지 않는 것으로 나타나고 있다.

• Journal of Theoretical and Applied Mechanics
• /
• 제1권1호
• /
• pp.69-88
• /
• 1995

The paper attempts to estimate the incubation time of a cavity in the interface between a power law creep particle and an elastic matrix subjected to a uniaxial stress. Since the power law creep particle is time dependent, the stresses in the interface relax. Through previous stress analysis related to the present physical model, the relaxation time is defined by ${\alpha}$2 which satisfies the equation $\Gamma$0 ｜1+${\alpha}$2k｜m=1-${\alpha}$2 [19]. $\Gamma$0=2(1/√3)1+m($\sigma$$\infty$/2${\mu}$)m($\sigma$0/$\sigma$$\infty$tm) where $\sigma$$\infty$ is an applied stress, ${\mu}$ is a shear modulus of a matrix, $\sigma$$\infty$ is a material constant of a power law particle, $\sigma$=$\sigma$0 $\varepsilon$ and t elapsed time. the volume free energy associated with Helmholtz free energy includes strain energies associated with Helmholtz free energy includes strain energies caused by applied stress anddislocations piled up in interface (DPI). The energy due to DPI is found by modifying the results of Dundurs and Mura[20]. The volume free energies caused by both applied stress and DPI are a function of the cavity size(${\gamma}$) and elapsed time(t) and arise from stress relaxation in the interface. Critical radius ${\gamma}$ and incubation time t to maximize Helmholtz free energy is found in present analysis. Also, kinetics of cavity fourmation are investigated using the results obtained by Riede[16]. The incubation time is defied in the analysis as the time required to satisfy both the thermodynamic and kinetic conditions. Through the analysis it is found that [1] strain energy caused by the applied stress does not contribute significantly to the thermodynamic and kinetic conditions of a cavity formation, 2) in order to satisfy both thermodynamic and kinetic conditions, critical radius ${\gamma}$ decreases or holds constant with increase of time until the kinetic condition(eq.40) is satisfied. Therefore the cavity may not grow right after it is formed, as postulated by Harris[11], and Ishida and Mclean[12], 3) the effects of strain rate exponent (m), material constant $\sigma$0, volume fraction of the particle to matrix(f) and particle size on the incubation time are estimated using material constants of the copper as matrix.

• Journal of Biosystems Engineering
• /
• 제14권2호
• /
• pp.67-79
• /
• 1989

This study was conducted to investigate the applicability of true model theory for pull prediction in a powered lugged wheel-soil system and to examine the possibility of using principles of similitude in investigating the dimensions of soil parameters pertinent to a powered lugged wheel-soil system concerning the pull prediction. The following conclusions were derived from the study; 1) The pull of prototype wheels proved to be predicted by those of the model wheels for the range of the dynamic weight tested. The pull curves of models and prototype were respectively very similar in the shape. From this basic knowledge, it was enabled to apply the similitude theory to the performance prediction of the true model. 2) A conditional equation which can be used for the prediction of pull of prototype by model test was derived as follows. $n_f=n_1^{-b}$ where $n_f$ : force scale = $w/w_m$ $n_1$ : length scale = ${\ell}/{\ell}_m$ b : exponent on the length dimension of the soil property ${\alpha}$ The range of the numerical value of b, which was determined by the least square method, was found to be -2.0~-2.6. 3) Considering a relatively wide variation of b values in the pull prediction, b is considered to be a function of many variales. Thus it was concluded that there are several soil properties which are pertinent to the powered lugged-wheel-soil system concerning the pull prediction, and these soil properties may have the different effects on the pull of model and protytype wheels, to give the different dimension on the soil parameters.

• 한국염색가공학회지
• /
• 제22권3호
• /
• pp.187-193
• /
• 2010

The effects of molecular weight (MW) and concentration on the rheological properties of poly(vinyl alcohol) (PVA) solutions in dimethyl sulfoxide (DMSO) were investigated at $30^{\circ}C$. Ubbelohde viscometer and rotational rheometer were employed for dilute and concentrated regime, respectively. In the dilute regime, the Mark-Houwink exponent ($\alpha$) of the solutions determined from three different MWs proved 0.73. The critical concentration (C*), in which the entanglement and overlap of polymer molecules began to take place, decreased with increasing the MW of PVA. Huggins constant ($K_H$) values ranged from 0.33 to 0.45 over the MW examined. In the log-log plot of $\eta_{sp}$ versus [$\eta$]C, the PVA with higher degree of polymerization (DP) gave a greater slope exhibiting the inflection point in the vicinity of C*. In the dynamic viscosity ($\eta'$) curve, the PVA solutions of DP 1700 presented Newtonian fluid behavior over most of the frequency range examined. However, the lower Newtonian flow region reduced with increasing the DP. As the PVA concentration increased, $\eta'$ was increased and the onset shear rate for pseudoplasticity was decreased. In the Cole-Cole plot, PVA solutions showed almost a single master curve in a slope of ca. 1.65 regardless of the DP. However, the increase of the concentration from 8 to 12 wt% for PVA solutions of DP 5000 decreased the slope from 1.73 to 1.57. In the tan $\delta$ curve, the onset frequency for sol-gel transition was shifted from 154 to 92 rad/s with increasing the DP from 3300 to 5000 and from 192 to 46 rad/s with increasing the concentration from 8 to 12 wt%. In addition, longer relaxation time ($\lambda$) was observed with increasing the DP and concentration.

• 한국세라믹학회지
• /
• 제49권5호
• /
• pp.475-483
• /
• 2012

High capacitance X5R MLCCs based on $BaTiO_3$ ceramic dielectric layers exhibit a single broad, asymmetric arc shape impedance and modulus response over the wide frequency range between 1 MHz to 0.01 Hz. Analysis according to the conventional brick-layer model for polycrystalline conductors employing a series connection of multiple RC parallel circuits leads to parameters associated with large errors and of little physical significance. A new parametric impedance model is shown to satisfactorily describe the experimental spectra, which is a parallel network of one resistor R representing the DC conductivity thermally activated by 1.32 eV, one ideal capacitor C exactly representing bulk capacitance, and a constant phase element (CPE) Q with complex capacitance $A(i{\omega})^{{\alpha}-1}$ with ${\alpha}$ close to 2/3 and A thermally activated by 0.45 eV or ca. 1/3 of activation energy of DC conductivity. The feature strongly indicate the CK1 model by J. R. Macdonald, where the CPE with 2/3 power-law exponent represents the polarization effects originating from mobile charge carriers. The CPE term is suggested to be directly related to the trapping of the electronic charge carriers and indirectly related to the ionic defects responsible for the insulation resistance degradation.