• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.687-697
• /
• 2010

This study was designed to carry out studies on critical seepage velocity and critical hydraulic gradient using a piping test targeting SM and ML which are widely distributed ahead of and behind the depth of E.L(-)10m in Saemangeum area in order to examine stability of embankment built on the ground vulnerable to piping. The effects of relative densities on critical hydraulic gradient and critical velocity were also compared and analyzed using empirical formula and theoretical formula, and relative densities were set up as respectively 9%, 25%, 50%, and 75% for this experiment. As a result, for critical hydraulic gradient, most of specimens detected piping at lower values than the empirical formula of Terzaghi(1922). It is, therefore, considered that the empirical formula devised by Kalin(1977) or Hayashi(1978) is more reasonable to be conservative. It was also found that critical velocity decreased as relative density increased, and critical velocity predicted was mostly lower than the theoretical formula.

• 한국지반공학회논문집
• /
• 제18권2호
• /
• pp.137-146
• /
• 2002

본 연구에서는 국내 해성퇴적 연약지반의 압밀특성을 실험적으로 규명하기 위하여 현장에서의 픽에조콘을 이용한 간극수압소산시험을 수행하고 동일한 위치와 심도에서 채취한 비교란시료를 이용하여 실내에서 Howe cell 압밀시험을 포함한 역학시험과 물성시험을 수행하였다. 이를 근거로 howe cell 압밀시험으로부터 구한 수평압밀계수$(c_r)$와 피에조콘 소산시험으로부터 구한 압밀도 50%에 해당하는 소산시간$(t_{50})$의 관계를 회귀분석을 통하여 실험식을 제안하였으며 이 실험식과 기존의 여러 학자들에 의해 제안된 이론해와의 관계를 비교하였다. 이에 의하면 실린더형 공동팽창이론에 근거한 Torstensson(1977)의 이론해와 변형률경로법에 근거한 Houlsby와 Teh(1988)의 이론해에 비교적 유사한 경향을 보이는 것으로 나타났다

• Journal of Welding and Joining
• /
• 제28권1호
• /
• pp.92-99
• /
• 2010

For the last couple of decades many studies have been carried out to find out solutions to improve the effectiveness and productivity of the plate forming process. The practical way for the automation of the plate forming process has not been, however, developed yet. Since the characteristics of heating machines may be different form each other, it is necessary to investigate the thermal deformation characteristics of the heating machine to be used in the automation system. And their characteristics may be updated as new information about thermal deformation by heating is accumulated. In this paper, data base system has been constructed based on the results of experiments and numerical analyses, which will be used in deriving the deformation estimation formula. The computer code which can automatically derive the deformation estimation formula has been also developed. This paper also illustrates how the formula is updated as experimental data are added. From the present findings, it can be said that the automatic deriving procedure may be important in the automated plate forming system since the heating line information to be generated must be directly influenced by the deformation estimation formula.

• Smart Structures and Systems
• /
• 제20권4호
• /
• pp.473-481
• /
• 2017

This study suggests a simple, convenient and non-destructive method for investigation of the Young's modulus detection in stepped shafts which only utilizes the first-order resonant frequency in flexural mode and dimensions of structures. The method is based on the impulse excitation technique (IET) to pick up the fundamental resonant frequencies. The standard Young's modulus detection formulas for rectangular and circular cross-sections are well investigated in literatures. However, the Young's modulus of stepped shafts can not be directly detected using the formula for a beam with rectangular or circular cross-section. A response surface method (RSM) is introduced to design numerical simulation experiments to build up experimental formula to detect Young's modulus of stepped shafts. The numerical simulation performed by finite element method (FEM) to obtain enough simulation data for RSM analysis. After analysis and calculation, the relationship of flexural resonant frequencies, dimensions of stepped shafts and Young's modulus is obtained. Numerical simulations and experimental investigations show that the IET method can be used to investigate Young's modulus in stepped shafts, and the FEM simulation and RSM based IET formula proposed in this paper is applicable to calculate the Young's modulus in stepped shaft. The method can be further developed to detect mechanical parameters of more complicated structures using the combination of FEM simulation and RSM.

• 한국강구조학회 논문집
• /
• 제10권1호통권34호
• /
• pp.25-35
• /
• 1998

각형 강관 기둥과 H형 보의 접합부에 대한 연구는 보의 하중을 기둥에 전달하는 과정에서 생기는 응력의 집중현상 때문에 하중을 효율적으로 전달하는 방식을 고안하는 것에 초점을 맞추었다. 본 연구에서는 외부보강형 접합부의 강도를 증가시키기 위한 방법으로 직사각형의 스티프너를 사용하였다. 실물의 절반크기로 시험체를 제작하여 단순 인장실험을 실시하였다. 항복선이론과 가상일법을 이용하여 접합부의 극한강도를 추정하는 공식을 유도하였으며 실험치에 근접한 결과를 얻었다.

• Geomechanics and Engineering
• /
• 제11권1호
• /
• pp.161-175
• /
• 2016

A series of experimental studies are conducted on the deformation and shear strength property of compacted loess. The results reveal that the relationships of both the initial moisture content (w) and the initial degree of compaction (K) of compacted loess with cohesion (w) and the angle of internal friction (${\varphi}$) are linear. The relationship between the secant modulus ($E_{soi}$) and K is also linear. The relationship between $E_{soi}$ and w can be fitted well by a second-order polynomial. Further, when the influences of w and K are ignored, the relationship between the confined compression strain (${\varepsilon}$) and vertical pressure (p) can be expressed by a formula. A correction formula for the deformation of compacted loess caused by a change in w and K is derived on the basis of the study results.

• Steel and Composite Structures
• /
• 제47권3호
• /
• pp.437-450
• /
• 2023

A half open cross section built-up column, namely cold-formed thin-walled steel built-up column with 12-limbsection (CTSBC-12) is put forward. To deeply reveal the mechanical behaviors of CTSBC-12 under axial compression and put forward its calculation formula of axial bearing capacity, based on the previous axial compression experimental research, the finite element analysis (FEA) is conducted on 9 CTSBC-12 specimens, and then the variable parameter analysis is carried out. The results show the FEA is in good agreement with the experimental research, the ultimate bearing capacity error is within 10%. When the slenderness ratio is more than 96.54, the ultimate bearing capacity of CTSBC-12 decreases rapidly, and the failure mode changes from local buckling to global buckling. With the local buckling failure mode unchanged, the ultimate bearing capacity decreases gradually as the ratio of web height to thickness increases. Three methods are used for calculating the ultimate bearing capacity, the direct strength method of AISI S100-2007 gives result of ultimate axial load which is closest to the test and FEA results. But for simplicity and practicality, a simplified axial bearing capacity formula is proposed, which has better calculation accuracy with the slenderness ratio changing from 30 to 100.

• Journal of Ship and Ocean Technology
• /
• 제1권1호
• /
• pp.48-56
• /
• 1997

This paper deals with the energy dissipation of ductile metal plate due to cutting. By using nondimensional analysis, we present that the dissipation energy of tearing behaviour can be formulated as a function of slenderness ratio expressed by cutting length, yield stress, plate thickness and elastic modulus. The validity of the proposed formula for Al-alloy, copper and mild steel is demonstrated by comparing the proposed formula with experimental results, which are shown in good agreements except for thick mild steel plate.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 컴퓨터소사이어티 추계학술대회논문집
• /
• pp.19-22
• /
• 2003

Class area is a portion of memory where the constants, fields, and codes of the classes loaded into the Java virtual machine are kept. Knowing the site of the class area is very important especially for embedded Java system with limited memory resources. This paper induces a formula which makes it possible estimate the size of the area. The formula needs some constant values specific to target JVM implementation. We also show that these values can be found using some simple probe classes. An experimental result is included in this paper to confirm the correctness of our approach.

• 대한수학회지
• /
• 제51권2호
• /
• pp.289-309
• /
• 2014

A combinatorial description of the crystal $\mathcal{B}({\infty})$ for finite-dimensional simple Lie algebras in terms of certain Young tableaux was developed by J. Hong and H. Lee. We establish an explicit bijection between these Young tableaux and canonical bases indexed by Lusztig's parametrization, and obtain a combinatorial rule for expressing the Gindikin-Karpelevich formula as a sum over the set of Young tableaux.