• Culinary science and hospitality research
• /
• v.22 no.5
• /
• pp.117-133
• /
• 2016

This study was to investigate the quality characteristics of sourdough bread made with 4 kinds of kamut sour starter. Kamut sour starters were made according to dough yield of sour starter and yeast adding on sour starter. We exmanined pH level, fermentation rate, specific volume, CrumbScan, moisture content, color value, texture analyzer, shelf-life test and sensory evaluation for observing quality characteristics of sourdough bread. From the results of pH measurement, kamut sourdough breads had lower pH value in dough and crumb pH than CON. In the experiment of dough's fermentation rate, CON had the rapidest fermentation rate among the samples initially, but the experimental groups also expanded as much as CON grew in spite of its slow fermentation. Specific volume and CrumbScan results suggested that CON had the largest volume. In addition, CM and TM had smaller volume than Pool and Biga. The sample that had the highest moisture content was Pool because its sour starter had the most amount of water. In color value test, CON had lighter crumb and crust color than other specimens. As a result of the TPA and shelf-life tests, CON had the softest hardness after 24 hours. However, Pool had similar hardness with CON after 72 hours. The result of the acceptance test of sourdough breads indicated that people prefered Pool and Biga to TM and CM. Difference test showed similar results with prior experiments. As the final outcome, Poolish was chosen as the optimal formula for kamut sour starter.

• Journal of the Society of Naval Architects of Korea
• /
• v.33 no.4
• /
• pp.1-14
• /
• 1996

Especially in the case of a full form ship, the stability on course can be considered to become severest among 4 items of criteria in Interim Standards for Ship Maneuverability adopted by IMO in 1993. The purpose of this study is to find some ideas for the improvement of stability on course through changes in rudder area with reference to span distance. In this paper, we established the formula on the relation between the experimental constants relevant to rudder normal force and hydrodynamic derivatives of hull-propeller-rudder system. We carried out various kinds of captive model test relevant to rudder normal force etc., and evaluated hydrodynamic derivatives of hull-propeller-rudder system, and analyzed the stability on course with the parameter of changes in rudder area. Furthermore, we also discussed effects of changes in rudder area on maneuvering performance including stability on course, based on computer simulation. As a result, it is clarified that there is a possibility that stability on course may become bad through an increase of rudder area. The reason for the bad stability on course is that the void space between the upper edge of rudder and the lower part of stern overhang decreases. This space change exerts a great influence on straightening coefficient of incoming flow to rudder in maneuvering motion, which has close relation to stability on course.

• Geophysics and Geophysical Exploration
• /
• v.9 no.2
• /
• pp.155-162
• /
• 2006

An abnormal seepage flow, which is mainly caused by the piping, is one of the major reasons for embankment dam failure. A leakage detection is therefore a vital part of an embankment dam's monitoring. Resistivity method, which is an efficient tool to detect leakage zones, has been used all over the world for an embankment dam's monitoring. Although the resistivity method gives us very useful information about the leakage problem, there is no more quantitative interpretation than the low resistivity zones in the 2-dimensional resistivity section are regraded simply as the anomalous seepage zones. Recently, resistivity monitoring technique is applied for the detection of leakage zones. However, its interpretation still remains in the stage of presenting the resistivity ratio itself. An increased seepage flow increases a porosity and an increasing porosity decreases the dam's stability. Therefore, the porosity is one of the major factors for an embankment dam's stability. Based on Archie's experimental formula, we try to evaluate a porosity distribution from the resistivity data which is obtained on the dam's crest. We also attempt to represent a procedure to evaluate a safety index of the embankment dam from the resistivity monitoring data.

• Clinical and Experimental Pediatrics
• /
• v.61 no.5
• /
• pp.135-149
• /
• 2018

Growth charts are curves or tables that facilitate the visualization of anthropometric parameters, and are widely used as an important indicator when evaluating the growth status of children and adolescents. The latest version of the Korean National Growth Charts released in 2007 has raised concerns regarding the inclusion of data from both breastfed and formula-fed infants, higher body mass index (BMI) values in boys, and smaller 3rd percentile values in height-for-age charts. Thus, new growth charts have been developed to improve the previous version. The 2006 World Health Organization Child Growth Standards, regarded as the standard for breastfed infants and children, were introduced for children aged 0-35 months. For children and adolescents aged 3-18 years, these new growth charts include height-for-age, weight-for-age, BMI-for-age, weight-for-height, and head circumference-for-age charts, and were developed using data obtained in 1997 and 2005. Data sets and exclusion criteria were applied differently for the development of the different growth charts. BMI-for-age charts were adjusted to decrease the 95th percentile values of BMI. Criteria for obesity were simplified and defined as a BMI of ${\geq}95th$ percentile for age and sex. The 3rd percentile values for height-for-age charts were also increased. Additional percentile lines (1st and 99th) and growth charts with standard deviation lines were introduced. 2017 Korean National Growth Charts are recommended for the evaluation of body size and growth of Korean children and adolescents for use in clinics and the public health sector in Korea.

• Journal of The Korean Association of Information Education
• /
• v.17 no.4
• /
• pp.433-447
• /
• 2013

The purpose of this study is to find out the factors of the students' achievement on the computer training courses which are based on computer practice. In order to improve the academic achievement of the students, it is necessary to analyze the factors affecting academic achievement and apply the results of the analysis to education. In particular, it is necessary to study for finding out factors of the academic achievement in practical computer training courses, because these courses are different from other courses focusing on the theory. In this study, in order to find out the factors, the logistic regression analysis and the decision tree analysis which is the field of data mining were peformed. For the experimental data, the test results of the MOS certification of the S university in seoul were used. Through logistic regression analysis it is found that the factors of the professors, class size, lecture time, group(lecture period) are important in order. Through decision tree analysis of data mining, it is found that there are some additional factors ; entrance year, whether the course is retaken, and the classroom environment. and these various factors effect the academic achievement compositively as identified through the model tree. The tree model was presented as a result of the analysis, and the importance of the factors is expressed numerically from multiple tree models by using the proposed mathematical formula.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.4
• /
• pp.651-658
• /
• 2001

A novel multi-section power divider configuration is proposed to obtain wide-band frequency performance up to microwave frequency region. Design procedures for the proposed microwave broadband power divider are composed of a planar multi-section three-ports hybrid and a waveguide transformer design procedures. The multi-section power divider is based on design theory of the optimum quarter-wave transformer. Furthermore, in order to obtain the broadband isolation performance between the two adjacent output ports, the odd mode equivalent circuit should be matched by using the lossy element such as resistor. The derived design formula for calculating these odd mode matching elements is based on the singly terminated filter design theory. The waveguide transformer section is designed to suppress the propagation of the higher order modes such as waveguide modes due to employing the metallic electric wall. Thus, each section of the designed waveguide transformer should be operated with evanescent mode over the whole design frequency band of the proposed microwave broadband power divider. This paper presents several simulations and experimental results of multi-section power divider to show validity of the proposed microwave broadband power divider configuration. Simulation and experiment show excellent performance of multi section power divider.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.1
• /
• pp.24-32
• /
• 2008

The ultimate purpose of the study is to develop a discomfort glare forecasting formula that can be practically used in Korea in order to effectively forecast discomfort glare considering the optical characteristics of the Koreans. The study was to examine the relations between discomfort glare and the variables such as luminance, background luminance, solid angle, luminous area and louver. To this end, experiments were conducted in a mock-up office that emulates the lighting environment of an ordinary office. The study was conducted by four steps as follow. First, previous studies on discomfort glare rating to define and rate discomfort glare were analyzed and modified to be applied to the experiments of this study. Second, experiment variables, variable scope, evaluation objects and evaluation points were determined after review on existing discomfort glare evaluation experimental formulas. Third, experiments were conducted in a mock-up office to be able to control variables. Finally, sensitivity of experiment variables were analyzed through examination of the relation between discomfort glare and the variables such as luminance, solid angle, louver, luminous area and subject's position. The result showed that the most influential variables on discomfort glare of an artificial light source is luminance and louver, luminous area and subject's position(solid angle) followed.

• Journal of Gifted/Talented Education
• /
• v.15 no.1
• /
• pp.67-84
• /
• 2005

In this study we investigated the adequacy of tools for distinction gifted students through the comparison these mutual relation on the basis of data, like paper test, the depths interview score, and the rest data((TTCT: Torrance Tests of Creative Thinking, IQ test, FASP: Find A Shape Puzzle, V.T: Visualization Tests and Exp: experimental ability test), and analysis data of EEG test for examining the adequacy of tools for identification gifted students. So, we developed Brain Wave gifted Index(G-Index) for finding another distinction ability as using brain waves data. The standard of index development use gifted brain characteristic in closed-eyes rest state which is judged like that characteristic of distinction between gifted and normal students is the most clear and consistence. That is, the degree of unified pattern between each object and gifted PCA pattern was defined by Pearson method which added spatial mutual index to weight concept. This refer to mean number of spatial PCA pattern. Searching for the possibility of distinction gifted gave distinction effect in 76%. The result of regression analysis on the basis of mutual relation between the rest data is . The probability formula for distinct gifted group is as follow. $$P=\frac 1{1+e^{-[-0.018(TTCT)+0.057(IQ)+1.916(FASP)+0.682(V.T)+0.088(Exp.)+0.034(G-Index)-57.510]}}$$ The result of this calculation showed that probability for distinct in gifted group was very good(95.0%). On the basis of upper result, tools for identification gifted students should be estimated as using many-sided estimation data whatever possible. And following study about development, and operation of tools for distinction suitable to gifted student in science should be progressed.

• Journal of the Korea Concrete Institute
• /
• v.17 no.4 s.88
• /
• pp.603-611
• /
• 2005

For the establishment of rational seismic design code for RC (reinforced concrete) bridge pier, this paper has analyzed the seismic code of RC bridge pier specified in )veil-known codes such as KHBDS (Korea Highway Bridge Design Specification), AASHTO Standard, ATC-32, Eurocode 8, NZS 3101, etc. So as to secure aseismic ductility of RC pier, transverse confinement steel ratios of those codes have been examined together with other design parameters such as strength of concrete and reinforcing steel, axial force ratio, aspect ratio, longitudinal steel ratio, etc. However, there has been arisen a doubt for the validity of those parameters. Thus, the objective of this study is to quantitatively evaluate the validity of design parameter of each code on the experimental seismic ductility for about 80 test specimens. It was concluded from this study that the axial force ratio is a dominant factor for the seismic displacement ductility. Therefore, it Is desirable that the axial force ratio be further taken into account in the corresponding seismic design formula of RC bridge pier in current KHBDS.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.21 no.2
• /
• pp.213-218
• /
• 1992

The reaching time to the freezing point was to be fast in the order of 2% agar gel, 5% agar gel, 20% gelatin gel, pork, respectively. The freezing time and the passing time through the zone of the maximum ice crystal formation had linear relationship with the coolant temperature. The average diameter d$_{p}$ of ice crystal in a soybean protein gel and the moving of freezing front were represented an inverse proportion, and the moving velocity of freezing front was shown as 3.4$\times$10$^{-6}$ $\textrm{cm}^2$/sec from predicted theoretical formula. This value was very close to experimental results. The storage temperature did not give any influences for the growth of ice crystal in inside soybean protein gels during freezing conservation. The relationship between freezing condition and structure of freezing front was as follows : (moving velocity of freezing front) : (mass transfer rate of water at freezing point)$\times$(surface area of freezing front).