• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.05a
• /
• pp.342-345
• /
• 2005

This paper describes the electron energy distribution function characteristics in $SF_6-He$ gas calculated for range of E/N values from $50{\sim}700[Td]$ by the Monte Carlo simulation(MCS) and Boltzmann equation(BE) method using a set of electron collision cross sections determined by the authors and the values of electron swarm parameters are obtained by time of flight(TOF) method. The results gained that the values of the electron swarm parameters such as the electron drift velocity, the electron ionization or attachment coefficients, longitudinal and transverse diffusion coefficients agree with the experimental and theoretical for a range of E/N. The results of Boltzmann equation and Monte carlo simulation have been compared with experimental data by Pollock, Ohmori, cottrell and Walker.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1287_1288
• /
• 2009

In this study dielectric and piezoelectric properties of fluoro-rubber/PZT composite were measured and analyzed by composite's laws. As the results the Rayleigh's equation was well consistent with experimental results qualitatively and the Bruggeman's equation was more well consistent with the experimental results for volume fraction of PZT quantitatively.

• Journal of the Korean Society of Industry Convergence
• /
• v.5 no.3
• /
• pp.193-200
• /
• 2002

An experimental study was performed to study heat transfer characteristics for turbulent flow in an axisymmetric annuli. The air flow temperature and the local Nusselt number in turbulent flow were measured or calculated for Re=30,000, 40,000, 50,000, 60,000, 70,000 and 80,000. The local Nusselts number were compared to that obtained from Dittus-Boelter equation with turbulent flow. The results show that the flow enhances the heat transfer in the initial and exit portion of the test tube.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.5 no.4
• /
• pp.347-353
• /
• 1981

The surging stresses of the valve spring of over head valve 4 cycle engine, which is made is Korea, were computed from theoretical analysis and these values were compared with the experimental results. For calculating surging stresses of test engine valve spring. Kato's equation should be corrected by the corretion factor C which is equal to twice rocker arm level ratio. Good agreement was found to exist between the theoretical analysis and the experimental results within.+-.5 percent differences. The stress amplitudes of test valve spring at each harmonic order were determined by the experiment and by using corrected equation, The safety considerations of test valve spring were discussed.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05a
• /
• pp.446-449
• /
• 2006

Several experimental investigations have been carried out to study the behavior of reinforced concrete columns with short lap splices. However, very few analytical models have been developed for the analysis of such columns subjected to earthquakes. As nonlinear analysis procedures become more common in practice (such as those outlined in the Guidelines for Seismic Rehabilitation of Buildings published by the Federal Emergency Management Agency in the United States), the need for an accurate and reliable representation of the nonlinear response of strength degrading systems becomes more important. In this study, an analytical model for estimating the complete response of reinforced concrete columns with short lap splices is presented. The model is based on local bond stress-slip relationships and is validated against independent experimental data from cyclic loading tests on reinforced concrete columns with typical construction details of the 1960s. In this paper a simple equation for calculating the bar stress at splice failure is presented. Use of the proposed equation resulted in excellent agreement between the measured and calculated strength at splice failure.

• Journal of Korean Association for Spatial Structures
• /
• v.1 no.2 s.2
• /
• pp.101-110
• /
• 2001

A large floating structure is attracting great attention in recent years from the view of ocean space utilization. Its huge scale in the horizontal directions compared with the wavelength and relatively shallow depth make this type of floating structure flexible and its wave-induced motion be characterized by the elastic deformation. In this paper, a boundary integral equation method is proposed to predict the wave-induced dynamic response mat-like floating offshore structure. The structure is modeled as an elastic plate and its elastic deformation is expressed as a superposition of free-vibration modes in air. This makes it straightforward to expand the well-established boundary integral technique for rigid floating bodies to include the hydroelastic effects. In order to validate the theoretical analysis, we compare with the experimental result of reduced model test. Satisfactory agreement is found between theory and experiment.

• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.6
• /
• pp.794-805
• /
• 1999

Pneumatic cushioning cylinders are commonly employed for vibration and shock control. A mathematical simulation model of a double acting pneumatic cushioning cylinder designed to absorb shock loads is presented which is based on the following assumptions; ideal equation of state isentropic flow through a port conservation of mass polytropic thermodynamics single degree of freedom piston dynamics and energy equivalent linear damping. These differential equation can be solved through numerical integration using the fourth order Runge-Kutta method. An experimental study was conducted to validate the results obtained by the numerical integra-tion technique. Simulated results show good agreement with experimental data. The computer simulation model presented here has been extremely useful not only in understanding the has been extremely useful not only in understanding the basic cushioning but also in evaluating different designs.

• Journal of Mechanical Science and Technology
• /
• v.17 no.12
• /
• pp.2042-2052
• /
• 2003

An experimental study was performed to investigate heat transfer characteristics of turbulent swirling flow in an axisymmetric annuli. The static pressure, the local flow temperature, and the wall temperature with decaying swirl were measured by using tangential inlet conditions and the friction factor and the local Nusselt number were calculated for Re=30000∼70000. The local Nusselt number was compared with that obtained from the Dittus-Boelter equation with swirl and without swirl. The results showed that the swirl enhances the heat transfer at the inlet and the outlet of the test tube.

• Journal of the Korean Wood Science and Technology
• /
• v.23 no.3
• /
• pp.8-15
• /
• 1995

This analytical study was carried out to make quality and productivity up in designing the frame-type furniture with semi-rigid joint by understanding the mechanical and structural behavior of the joint and by evaluating the validity of application of the time-saving Finite Element Method to its structural analysis. Slope deflection equation for rigid joint was modified to describe the moment-rotation behavior of semi-rigid joint and the joint stiffness factor(Z) could be calculated to lessen the experimental expense. It was proved that Finite Element Analysis with imaginary elements having equivalent MOE to the semi-rigid joint could be the alternative method for the structural analysis of the frame-type furniture, comparing the internal rotation of the 2-dimensional beam-to-column model with two-pin(wooden dowel) from the finite element method with other available theoretical and experimental rotation value.

• Journal of the Korean Society of Safety
• /
• v.15 no.1
• /
• pp.43-52
• /
• 2000

Generally, photoelastic experimental data were measured in the closed vicinity of crack tip to determine stress intensity factors of a crack with photoelastic experiment method. In this case, only the first order term has been considered in the equation of stress field. But because it is very difficult to measure the correct photoelastic data in the closed vicinity of crack, the accuracy of experimental results was very poor. By including the high order terms in the stress field equation we could obtain the accurate S.I.F values by using clear photoelastic data in the distant region from crack tip instead of unclear photoelastic data in the vicinity of crack tip.