• The Transactions of the Korea Information Processing Society
• /
• v.5 no.11
• /
• pp.2980-2988
• /
• 1998

This paper describes the design of asynchronous adders based on carry selection and carry bypass techniques. The designs are faster than existing asynchronous adders which are based on ripple carry technique. It is caused by reducing the carry transfer time by using carry selection and carry bypass techniques. Also, the design uses tree structure to reduce the completion sensing time. The proposed adders are designed with CMOS domino logic and experimented with HSPICE simulator. Experimental results show that the proposed adders can be faster about 50% in average cases than previous ripple carry adders.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.2 no.3
• /
• pp.194-201
• /
• 2007

As the performance of the mobile terminal becomes higher, the power consumption gradually increases. As a result, power management is one of the most important issues in mobile system with battery. In this paper, we describe an DPM(Dynamic Power Management) using DVS(Dynamic Power Management) as a power management mechanism in Qplus operating system. DVS generally considers a specific device such as CPU, whereas we consider the relations with other hardware components as well as each component. We specially focus on the relation between CPU, memory and LCD devices. We also designs a kernel monitor to collect information to decide the policy for power management. According to the experimental results, the proposed method enables to save much power.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.12
• /
• pp.2318-2325
• /
• 2011

The quality of float solution deeply influences the performance of CDGPS because the theories being used in the integer ambiguity resolution method are derived under the assumption of AWGN. But in real world, the properties of noises are far from AWGN, especially when multipath are concerned. It results in the bias in float solution which affects the success rate of integer ambiguity and the precision of position in CDGPS. This paper designs an augmented Kalman filter using shaping filter and Kalman filter for the performance improvement of CDGPS on multipath. The experimental results with real measurements show that the correct integer ambiguity is always found while the success rates of WLSQ and ordinary Kalman filter are 5% and 18%, respectively. Eventually, the position accuracy is also improved by using the proposed algorithm.

• Journal of the Korea Furniture Society
• /
• v.23 no.1
• /
• pp.38-46
• /
• 2012

This article aimed to identify the significance of 'Limited Edition' in 'Art Furniture' field, which is rather well known in fine art like printing and sculpture. The consumer never responded to 'Art furniture' positively for its artistic quality and authenticity before than these days. For this, Author featured out current tendencies of 'Art Furniture' in terms of 'Limited Edition' can be easily found in well-known designer or artist's work, suggests designers should aim for their design. This desire, as a result, gave an opportunity to designers to produce new products in various different ways. And at the same time, suggest a new method in furniture design. Furthermore, 'Limited Edition' became a channel and opens a new environment for designers to explore and come up with new experimental designs.

• ETRI Journal
• /
• v.24 no.6
• /
• pp.473-476
• /
• 2002

This letter proposes an efficient kernel-based partitioning algorithm for reducing area and power dissipation in combinational circuit designs using don't-care sets. The proposed algorithm decreases power dissipation by partitioning a given circuit using a kernel extracted from the logic. The proposed algorithm also reduces the area overhead by minimizing duplicated gates in the partitioned sub-circuits. The partitioned subcircuits are further optimized utilizing observability don't-care sets. Experimental results for the MCNC benchmarks show that the proposed algorithm synthesizes circuits that on the average consume 22.5% less power and have 12.7% less area than circuits generated by previous algorithms based on a precomputation scheme.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.12
• /
• pp.1152-1159
• /
• 2015

Switching power supply systems are widely used in many industrial fields. Power factor correction (PFC) circuits have a tendency to be applied in new power supply designs. The PFC circuit with a boost converter using an input power source is studied in this paper. In a boost PFC circuit, there are two feedback control loops: a current feedback loop and a voltage feedback loop. In this paper, the regulation performance gained by using the output voltage and compensator to improve the transient response presented at the continuous conduction mode (CCM) of the boost PFC circuit is analyzed. The validity of the designed boost PFC circuit is confirmed by both MATLAB simulation and experimental results.

• Journal of Industrial Technology
• /
• v.17
• /
• pp.313-322
• /
• 1997

As the weight of trucks increases, the need for concrete pavement also increases. Therefore, the addition of fly-ash may improve the properties of pavement concrete as well as recycle fly-ash. A full factorial experiment was performed using the primary variables, such as water-cement ratio, fly-ash substitution ratio, and maximum size of coarse aggregate, as a preliminary study for optimum mixture design for pavement concrete. The results of preliminary study indicates that the addition of fly-ash is the most important factor determining concrete strength, followed by the maximum size of coarse aggregate and water-cement ratio. It, also, shows the relative importance of fly-ash substitution ratio, compared to the water-cement ratio, and the interaction effects between the primary variables. Optimum mixture designs for pavement concrete incorporating fly-ash, that satisfied the target responses, were proposed in terms of fly-ash substitution ratio, water cement ratio and maximum size of coarse aggregate.

• Wind and Structures
• /
• v.10 no.4
• /
• pp.315-346
• /
• 2007

A preceding companion article introduced the slot jet approach for large-scale quasi-steady modelling of a downburst outflow. This article extends the approach to model the time-dependent features of the outflow. A two-dimensional slot jet with an actuated gate produces a gust with a dominant roll vortex. Two designs for the gate mechanism are investigated. Hot-wire anemometry velocity histories and profiles are presented. As well, a three-dimensional, subcloud numerical model is used to approximate the downdraft microphysics, and to compute stationary and translating outflows at high resolution. The evolution of the horizontal and vertical velocity components is examined. Comparison of the present experimental and numerical results with field observations is encouraging.

• Design & Manufacturing
• /
• v.8 no.1
• /
• pp.23-26
• /
• 2014

The injection molding is used in more than 70% of total production of plastic products. Weld line in injection molded part is one of the defects in injection molding process. Weld line deteriorates not only appearance quality but also mechanical property. In this study weld quality has been examined according to the injection processing temperature, materials and mold designs. We selected four different materials such as PA, PP, ABS and PS as experimental materials. Weld quality increased as injection processing temperature increases. It was more dependent on materials flow ability. As a result, weld quality incase of rectangular core is better than circular core.

• Journal of Korea Multimedia Society
• /
• v.21 no.2
• /
• pp.108-116
• /
• 2018

In this paper, we propose an image enhancement method based on Multi-Scale Retinex theory that designs Unsharp Masking Filter (UMF) and emphasizes the contrast ratio adaptively. Unsharp Masking (UM) technique emphasizes image sharpness and improves contrast ratio by adding high frequency component to the original image. The high frequency component is obtained by differentiating between original image and low frequency image. In this paper, we present how to design an UMF kernel and to adaptively apply it to increase the contrast ratio according to multi-scale retinex theory which resembles human visual system. Experimental results show that the proposed method has better quantitative performance indexes such as PSNR, ambe & SSIM and better qualitative feature like halo artifact suppression.