• Computers and Concrete
• /
• v.28 no.5
• /
• pp.479-486
• /
• 2021

Reinforced concrete (RC) slabs are exposed to several static and dynamic effects during their period of service. Accordingly, there are many studies focused on the behavior of RC slabs under these effects in the literature. However, impact loading which can be more effective than other loads is not considered in the design phase of RC slabs. This study aims to investigate the dynamic behavior of two-way RC slabs under sudden impact loading. For this purpose, 3 different simply supported slab specimens are manufactured. These specimens are tested under impact loading by using the drop test setup and necessary measurement devices such as accelerometers, dynamic load cell, LVDT and data-logger. Mass and drop height of the hammer are taken constant during experimental study. It is seen that rigidity of the specimens effect experimental results. While acceleration values increase, displacement values decrease as the sizes of the specimens have bigger values. In the numerical part of the study, artificial neural networks (ANN) analysis is utilized. ANN analysis is used to model different physical dynamic processes depending upon the experimental variables. Maximum acceleration and displacement values are predicted by ANN analysis. Experimental and numerical values are compared and it is found out that proposed ANN model has yielded consistent results in the estimation of experimental values of the test specimens.

• Journal of Welding and Joining
• /
• v.5 no.1
• /
• pp.42-56
• /
• 1987

Fatigue Fracture behaviors of the TIG-welded aluminum alloys, such as Al 2024-T4, A1 5050-0 and Al 7075-T7 were investigated when a crack propagated from tensile residual stress region and compressive residual stress region. The experimental values were compared with the values expected by the Forman equation. The experimental results are summarized as the following: (1) In case of fatigue crack propagation from residual stress region, the values predicted by Forman equation were Found to exactly corresponded to the experimental values. (2) When the stress intensityfactors affected by compressive residual stress, Kres, were greater than the stress intensity factors by minimum applied stresses. Kmin, the Forman equation was found to be improper to be applied directly, but the equation appeared to be proper, if the stress ratio was modified to zero. (3) The experimental results confirmed that residual stress was relaxed by repeated tensile loading and the relaxing trend was greater in case of compressive residual stress than that of tensile residual stress.

• International Journal of Fluid Machinery and Systems
• /
• v.8 no.4
• /
• pp.311-317
• /
• 2015

It is difficulty to calculate velocity circulation in centrifugal pump impeller outlet accurately. Velocity circulations of a double-blade pump impeller outlet were calculated with Stodola formula, Weisner formula and Stechkin formula. Simultaneously, the internal flow of impeller for the double-blade pump were measured with PIV technology and average velocity circulations at the 0.8, 1.0 and 1.2 times of design flow were obtained. All the experimental values were compared with the above calculation values at the three conditions. The results show that calculation values of velocity circulations with Weisner formula is close to the experimental values. On the basis of the above, velocity circulations of impeller outlet were corrected. The results of experimental verification show that the corrected calculation errors, whose maximum error is 3.65%, are greatly reduced than the uncorrected calculation errors. The research results could provide good references for establishment of theoretical head and multi-condition hydraulic optimization of double-blade pumps.

• Journal of Oral Medicine and Pain
• /
• v.14 no.1
• /
• pp.57-66
• /
• 1989

66 patients with temporomandibular disorders were selected for experimental group, and 45 normal subjects who were Dental students were selected for control group. Average age of experimental group was 30.5 years, Male to Female ratio was 2 : 3, and their age distribution were teen-ages to seventh decades. Transcranial radiography (TR) with Denar Accurad 100 was used for each group to get the values of width in joint spaces and to investigate the bony changes of articular surfaces and relative condylar position to articular fossa. In addition to TR, clinical interview and routine charting about amount of mandibular movements and occlusal variations were carried out in experimental group. The obtained results were as follows : 1. The mean values of joint space with in control group were 2.15mm to anterior, 2.98mm to superior and 2.29mm to posterior and the value of relative condylar position to the deepest portion of articular fossa was 0.21mm to anterior. In experimental group, those values were 2.01mm, 2.14mm 2.22mm and 0.12mm to posterior in sequence, respectively. Joint spaces in experimental group, therefore, were inclined to decreased, and relative condylar position was inclined to retrude. Joint space in control group showed symmetric condylar position, but in experimental group showed asymmetry. 2. Non-affected joints with no bony changes in experimental group showed the narrowest joint spaces which were thought to manifest the abnormal stress to non-affected side to dysfunctional state of contralateral affected joints. 3. Amount of mandibular movements in experimental group were within normal values in lateral movements and in protrusive movement but in opening movement with or without passive stretch, those were lower than normal values. Frequency of occlusal variation, for example, protrusive posterior contacts, open bite, median line shift to lateral side were inclined to increase with bony changes and with crepitus.

• Fibers and Polymers
• /
• v.5 no.4
• /
• pp.309-315
• /
• 2004

In this paper, a comparison between a mathematical and an experimental method for the evaluation. of some process components of polyester microfibre dyeing is presented. In the experimental part, a dyeing procedure was chosen, K/S values of the dyed samples were measured and the coefficients of the mathematical formula presented in the mathematical part were obtained. K/S values of different dyeing procedures were also measured. In the mathematical part, predicted K/S values were calculated by a novel formula. The results of the two methods were then compared. According to the results obtained, the mathematical formula presented in this study can be used for calculating the predicted K/S values at lower dye concentrations.

• Nuclear Engineering and Technology
• /
• v.51 no.2
• /
• pp.384-393
• /
• 2019

An experimental validation of a nuclear forensics methodology for the source reactor-type discrimination of separated weapons-useable plutonium is presented. The methodology uses measured values of intra-element isotope ratios of plutonium and fission product contaminants. MCNP radiation transport codes were used for various reactor core modeling and fuel burnup simulations. A reactor-dependent library of intra-element isotope ratio values as a function of burnup and time since irradiation was created from the simulation results. The experimental validation of the methodology was achieved by performing two low-burnup experimental irradiations, resulting in distinct fuel samples containing sub-milligram quantities of weapons-useable plutonium. The irradiated samples were subjected to gamma and mass spectrometry to measure several intra-element isotope ratios. For each reactor in the library, a maximum likelihood calculation was utilized to compare the measured and simulated intra-element isotope ratio values, producing a likelihood value which is proportional to the probability of observing the measured ratio values, given a particular reactor in the library. The measured intra-element isotope ratio values of both irradiated samples and its comparison with the simulation predictions using maximum likelihood analyses are presented. The analyses validate the nuclear forensics methodology developed.

• Human Ecology Research
• /
• v.59 no.4
• /
• pp.501-523
• /
• 2021

In this study, a value-based children's financial education program was developed focusing on the values of each financial management area needed for children. According to 'quasi-experimental design - non-equivalent control group design', an experimental group and a control group were formed for children in the lower grades of elementary school, and a value-based child financial education program was executed, and then the program was applied to children's personal financial management. The effect on the value propensity for each area was evaluated. As a result of the quantitative evaluation, it was confirmed that the 8 values of the children in the experimental group were significantly improved compared to the children of the control group, so this program was effective in enhancing the values of each of the 8 areas of personal financial management needed for children. In addition, the children in the experimental group showed significant improvement compared to the children in the control group in the cognitive, justice, and psychodynamic levels of values. It has also been found to be effective in enhancing as a result of the qualitative evaluation, various positive changes were found in the cognitive, affective, and psycho-dynamic dimensions about the values of each financial management area for children. From a positive perspective, it was found that it plays a useful role in cultivating the values of each area of positive personal financial management.

• Textile Coloration and Finishing
• /
• v.7 no.1
• /
• pp.58-64
• /
• 1995

In this study, we attempted to expect the mechanical characteristics of the wool fabrics by knowing the yarns. Moreover, we believe that we could apply these results to fabric design. We investigated the relationship between the mechanical characteristics of yarns and fabrics. As results, we have found that bending rigidity, bending hysteresis, compressional energy and compressional linearity between yarns and fabrics had correlated more than r=0.5. Also, the correlation between regression and experimental values is r=0.5 in stiffness while it is r=0.67 in fullness. And regression values were larger than experimental ones in stiffness, but were not in fullness. The correlation between regressional and experimental values had 0.63 in THV. According to the study, it is possible to apply it to fabric design when our predicting the primary hand and the total hand values of the fabrics from the mechanical characteristics of the yarns.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.8
• /
• pp.1165-1170
• /
• 2004

The applicability of the combined nearly ideal binary solvent/Redlich-Kister (CNIBS/R-K) equation for correlation of various solvatochromic parameters (SP) with composition is shown employing 84 experimental data sets for aqueous and organic binary solvent systems at temperatures ranging 15 to $75^{\circ}C$. The model provides a simple computational model to correlate/predict different SP values in various binary solvent systems. In proposed equations, $MPD_s$ (mean percentage deviations) are between 0.0500% and 6.9591% in mixtures of dimethyl sulfoxide with 2-methylpropan-2-ol and benzene with 2-methylpropan-2-ol, respectively. Correlation of the calculated and experimental values of various SP give an equation with an overall mean percentage deviation (OMPD) of 1.1900, $R^2$ = 0.99692, s.e = 0.01223 and F = 341925.51. Approximately 70% of the calculated SP values have IPD (individual percentage deviation) lower than one and it is possible to predict unmeasured SP values by using only eight experimental data.

• Structural Engineering and Mechanics
• /
• v.39 no.6
• /
• pp.751-765
• /
• 2011

The present paper deals with the identification of a concentrated damage in an elastic parabolic arch through the minimization of an objective function which measures the differences between numerical and experimental values of static displacements. The damage consists in a notch that reduces the height of the cross section at a given abscissa and therefore causes a variation in the flexural stiffness of the structure. The analytical values of static displacements due to applied loads are calculated by means of the principle of virtual work for both the undamaged and damaged arch. First, pseudo-experimental data are used to study the inverse problem and investigate whether a unique solution can occur or not. Various damage intensities are considered to assess the reliability of the identification procedure. Then, the identification procedure is applied to an experimental case, where displacements are measured on a prototype arch. The identified values of damage parameters, i.e., location and intensity, are compared to those obtained by means of a dynamic identification technique performed on the same structure.