• 방사선산업학회지
• /
• 제6권3호
• /
• pp.245-249
• /
• 2012

Demand of fluid flow visualization has increased in industrial processes, because medical imaging technology is highly developed. As a part of the industrial process imaging technology, industrial single photon emission computed tomography (SPECT) system was developed to measure the cross-sectional distribution of the process fluid. The SPECT consists of 36 NaI (Tl) detectors with the hexagonal configuration. Reconstructed images were acquired for various positions of radioactive source to estimate SPECT device performance. To evaluate the reliability of the experimental results, the Monte Carlo simulation results are compared with experimental results. In general, the experimental and simulation results were consistent. However, as the source position was getting far from the center of the reactor, the accuracy of reconstructed images was compromised. It seems to be due to the inconsistent spatial resolution of the collimators according to the source position.

• 한국가시화정보학회지
• /
• 제20권2호
• /
• pp.28-37
• /
• 2022

Flow characteristics of jet impingement over concave hemispherical surface with effusion cooling holes is relatively more complex than that of a flat surface, so the experimental validation for computational fluid dynamics (CFD) results is important. In this study, experimental results were compared with simulation results obtained by assuming different turbulence models. The vortex was observed in the region between the central jets where the recirculation structure appeared. The different patterns of vorticity distributions were observed for each turbulence models due to different interaction of the injected jet flow. Among them, the transition k-kl-ω model predicted similarly not only the jet potential core region with higher velocity, but also the recirculation region between the central jets. From the validation, it may be helpful to accurately predict heat and mass transfer in jet impingement/effusion hole system.

• Computers and Concrete
• /
• 제31권1호
• /
• pp.9-21
• /
• 2023

The published studies usually used analytical method, numerical methods or experimental method to determine the stress-strain state and displacement of the single-layer or multi-layer curved shell types, but with a small scale model. However, a full scale multi-layer doubly curved concrete shell roof model should be researched. This paper presents the results of the experiment and simulation analysis involving stress-strain state, sliding between layers, the formation and development of the full scale double-layer doubly curved concrete shell roof when this shell begins to crack. The results of the this study have constructed the load-sliding strain relationship; strain diagram; stress diagram in the shell layers; the N_x, N_y membrane force diagram and deflection of shell. Thisresults by experimental method on a full scale model of concrete have clarified the working of multi-layer doubly curved concrete shell roof. The experimental and simulation results are compared with each other and compared with the Sap2000 software.

• 대한방사선기술학회지:방사선기술과학
• /
• 제32권4호
• /
• pp.445-451
• /
• 2009

전산화단층촬영 시뮬레이션 프로그램은 환자가 받는 방사선 피폭 선량에 전혀 관계가 없으면서 임상에서 사용하는 고가의 의료 장비와 같은 모의실험을 함으로써 양질의 교육효과를 얻을 수 있다. 이러한 프로그램의 장점을 최대한으로 이용하기 위하여 강의 교안을 만든 다음 교육을 실시하였다. 이론교육만 실시한 학생을 대조군으로, 이론교육과 시뮬레이션 교육을 동시에 실시한 학생을 실험군으로 분류하여 면접평가 하였다. 대조군과 실험군의 평가를 시행한 결과 실험군의 성적이 월등히 향상됨을 알 수 있었다. 그러므로 시뮬레이션 프로그램은 학생들과 임상을 앞둔 방사선사에게 양질의 교육 자료로 활용될 것으로 사료된다.

• 소성∙가공
• /
• 제21권5호
• /
• pp.298-304
• /
• 2012

The shielded slot plates for a molten carbonate fuel cell(MCFC) have a sheared corrugated trapezoidal pattern. In the FEM simulations for the production of the shielded slot plate, the user material subroutine VUMAT in the commercial FEM software ABAQUS was used to implement a ductile fracture criterion. The critical damage value for the ductile fracture criterion was determined by comparing the experimental results of the shearing process with the simulation results. Using the ductile fracture criterion, the FEM simulation of the three-dimensional forming process of the shielded slot plate was conducted. The effects of the shearing process on the forming process were examined through FEM simulation and experiments. The forming simulation of nine unit cells was conducted. Using the simulation results of the forming process, the deformed shape after springback was calculated. The experimental result shows good agreement with the simulation.

• 임상간호연구
• /
• 제18권3호
• /
• pp.381-390
• /
• 2012

Purpose: This study was conducted to examine the effects of simulation-based infection control training on the ICU nurses' perception, clinical performance, and self-efficacy of infection control. Methods: Thirty-eight nurses were assigned into two groups using a career stratified randomization. In the experimental group, the subjects received a simulation-based infection control training, whereas the control group participated in a conventional lecture-based training. Two weeks after the completion of the training sessions, the participants were evaluated for perception, clinical performance, and self-efficacy regarding the infection control. Results: The experimental group that received simulation-based infection control training showed an improvement in perceiving the infection control compared to that of the control group, but the difference was not statistically significant. In terms of the clinical performance, the experimental group and the control group scored $26.05{\pm}3.22$ and $18.53{\pm}3.37$ points respectively, demonstrating a statistical significance (p<.001). There was no significant difference between the two groups in regards to the self-efficacy. Conclusion: The developed simulation-based infection control training showed positive effects in improving clinical performance of infection control over conventional lecture-based training, confirming that a simulation-based training is an effective method in advancing the practical performance of ICU nurses.

• 성인간호학회지
• /
• 제25권5호
• /
• pp.494-503
• /
• 2013

Purpose: The purpose of this study was to examine the effects of a simulation-based educational program on anxiety and discomfort in patients with early stage of stomach cancer or stomach adenoma undergoing gastroendoscopic surgery. Methods: The study employed a non-equivalence control group and non-synchronized design to prevent diffusion of treatment. Data were collected from 110 patients (experimental group=55, control group=55) admitted to a department of gastroenterology to undergo gastroendoscopic surgery for early stage of stomach cancer or stomach adenoma. The program was conducted as a 30-minute simulation-based education including 12 processes which patients would experience. Outcome variables were state anxiety, objective discomfort, and subjective discomfort. Results: The scores of state anxiety in the experimental group significantly decreased over time compared to those in the control group. The scores of objective and subjective discomfort after surgery in the experimental group were significantly lower than those in the control group. Conclusion: The study findings suggested that the simulation-based educational program making a person feel sense of real experiences could reduce anxiety and discomfort in gastroendoscopic surgery patients.

• 한국음향학회지
• /
• 제20권3호
• /
• pp.91-97
• /
• 2001

능동소나 시스템에서 표적신호의 근거리 정보가 중요해짐에 따라, 표적 음향산란 신호의 고유한 특성을 분석하기 위해 실험적인 방법과 시뮬레이션 기법이 사용된다. 본 논문에서는 표적신호 합성을 위해 축소표적 반향실험을 수행하였고. 자료의 분석 결과 축소표적의 음향산란은 거울면 반사의 영향이 큰 것으로 분석되어, 표적신호 합성에서 기하광학이론을 응용하였다. 복잡한 형태의 표적을 여러 표본형상으로 분리하고, 각 표본형상의 기여도를 신호의 위상과 강도를 줌으로써 계산하였으며, 표적신호 합성모델의 검증을 위해 실제 축소표적 실험 결과와 비교하였다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.1332-1337
• /
• 2008

Fire model shall be verified and validated to reliably predict the consequences of fires within its limitations. This study aims to predict pool fire with two rooms using FDS and to coompare FDS simulation results with PRISME experimental data which can be applicable to the fire of nuclear power plant facility. Four different sizes of grid (0.08m, 0.1m, 0.125m, 0.2m) are used in the simulation and the simulated results of specific quantities such as temperature, chemical composition, heat flux and heat release rate are compared to the experimental data. From this study, the FDS simulation results with the finer grid resolution show better similarity and trend with pool fire experimental data. The sensitivity analysis and the selection of the proper size grid are essential to predict the consequences of pool fire with two rooms reliably.

• Elastomers and Composites
• /
• 제55권2호
• /
• pp.120-127
• /
• 2020

In this study, molding shrinkage of PPS resin was investigated. Two types of PPS resins with differing glass fiber and calcium carbonate content were used for this purpose. To observe mold shrinkage, molding conditions based on injection temperature, injection speed, and the position of the cushion were selected. Circular and rectangular specimens were used for the study model. Injection molding simulation was performed to predict the filling pattern and mold shrinkage, and the simulation results were compared with the experimental conclusions. It was observed that the mold shrinkage showed the highest shrinkage (distributed from 0.05% to 0.32%) dependence on the injection temperature, and the lowest shrinkage (distributed from 0.05% to 0.31%) dependence on the injection speed. The role of the position of the cushion in mold shrinkage was difficult to observe. The results of the simulation mostly agreed with the experimental results; however, for some molding conditions, the mold shrinkage in the simulation was overestimated as compared to that in the experiment.