• The korean journal of orthodontics
• /
• v.16 no.2
• /
• pp.53-67
• /
• 1986

The physical tooth movement by orthodontic force is based upon alveolar bone resorption at compression site and new bone formation at tension site of the alveolar socket. The function of the cyclic AMP is to participate not only in initial action of bone cells by mechanical forces but also in the continuous cellular response leading to bone remodelling. This experiment was performed to clarify the role of cyclic AMP in bone remodelling by mechanical force in the NORMAL group, the DIABETES group and the INSULIN TREATED group. The 72 rats were divided into the NORMAL group, the DIABETES group and the INSULIN TREATED group. The same orthodontic forces were applied to the rats of 3 groups. These rats were treated for periods of time ranging from 1 hour, 1 day, 7 days, 14 days, 21 days and 28 days. The samples of alveolar bones were obtained from compression and tension sites surrounding the tipping teeth from NORMAL, DIABETE and INSULIN TREATED rats. The samples were assayed for cyclic AMP by the cyclic AMP RIA kit. The results were as follows: 1. The cyclic AMP levels of alveolar bone in compression and tension sites showed initial decrease, then increased and .remained elevated by the time consuming. 2. The highest cyclic AMP level showed in the DIABETES group and the lowest level was in the NORMAL group. 3. The cyclic AMP levels in the INSULIN TREATED group was similar with the NORMAL group in control and tension sites, but in the compression sites it was similar with the DIABETES group.

• Restorative Dentistry and Endodontics
• /
• v.19 no.2
• /
• pp.513-533
• /
• 1994

The smooth surface after polishing of composite resin contributes to the patient's comfort, and appearance and longevity of the restoration. This study was performed for the quantitative analysis of the effects of the various finishing and polishing instruments on the surface roughness and reflectivity of the microfill, and hybrid composite resins. Cylindrical specimens 2mm thick and 10mm in diameter of Silux Plus, Durafill VS ; Z100, Prisma TPH, Brilliant, and Herculite XR composite resin were polymerized under the matrix strip. 18 specimens for each composite resin materials were divided into 6 groups ; 5 experimental groups were abraded with # 600 sand paper to remove resin-rich layer, except control. Thereafter, using diamond bur(Mani Dia-Burs), carbide bur(E. T. carbide set 4159), rubber point(Composite polishing kit), aluminum-oxide disk(Sof-Lex disk), polishing paste(Enhance system) ; each specimen was polished to its best achievable surface according to manufacturer's directions. Final polished surfaces were evaluated for the surface roughness with profilometer(${\alpha}$-step 200, Tencor instruments, USA) and for the reflectivity with image analyser(Omniment Image Analyser, Buehler, USA). The results were as follows. 1. Polishing paste or aluminum-oxide disk finish in the microfill, and hybrid composite resins was as smooth as matrix strip finish on the surface roughness test. 2. Polishing paste or aluminum-oxide disk finish in the microfill ; polishing paste finish in the hybrid composite resins was as reflective as matrix strip finish on the refectivity test. 3. For the polishing paste, there were no significant differences between the composite resin materials on the surface roughness and refectivity tests. 4. For the aluminum-oxide disk, the best result was obtained with the microfill composite resin on the surface roughness and reflectivity test. 5. Diamond bur, carbide bur, and rubber point were inappropriate for the final polishing instruments.

• Herbal Formula Science
• /
• v.24 no.2
• /
• pp.100-107
• /
• 2016

Objectives : The purpose of this study is to evaluate the anti-lipogenic effect of Sobuncheong-eum on non-alcoholic fatty liver disease in free fatty acid induced cellular model. Methods : HepG2 cells were treated with palmitate for 24h to overload intracellular triglyceride (TG) content in the presence or absence of Sobuncheong-eum extract. After palmitate treatment, Intracellular TG content was measured with TG assay kit. Several lipogenesis related markers, including AMP-activated protein kinase (AMPK), sterol regulatory element-binding transcription factor-1c (SREBP-1c), acetyl-CoA carboxylase (ACC), and fatty acid synthase (FAS), were assessed using Western-blot analyses and RT-PCR. Results : Palmitate markedly increased intracellular TG in HepG2 cells, and which were alleviated by coadministered Sobuncheong-eum extract. Sobuncheong-eum extract activated AMPK, which plays a key role in reducing hepatic lipid accumulation, and reduced lipogenic fators, SREBP-1c, ACC, and FAS. Conclusions : Taken together, it is conceivable that Sobuncheong-eum has an potential to alleviate steatosis, and which may be mediated by activating AMPK at least in part.

• Biomolecules & Therapeutics
• /
• v.9 no.4
• /
• pp.277-281
• /
• 2001

Chromium is an essential nutrient and participates in glucose and lipid metabolism in human beings and animals. The present study was conducted to assess the effects of chromium picolinate (Cr-pic) on glucose tolerance and insulin sensitivity in type I and ll diabetic rats. The experimental groups were type I diabetic (streptozotocin-induced: 40 mg/kg, i.p.) and type II diabetic (Goto-Kakizaki rats) models. Each group was subdivided into control. low-dose and high-dose of Cr-pic treated groups. The Cr-pic was orally administered with Cr-pic (100 mg/kg for low dose group and 200 mg/kg for high dose group) for 4 weeks. And then we performed intraperitoneal glucose tolerance test (IPGTT) and insulin sensitivity test (ITT). The glucose tolerance test was carried out by inection of glucose (2 g/kg, i.p.). The peripheral insulin sensitivity test was con- ducted by injection of insulin (5 units/kg, s.c.) and glucose. We performed determining of blood glucose concentration at 0, 10, 30, 60, 90, and 120 min using automated glucose analyzer. The plasma insulin concentration was determined by rat insulin EIA kit. Administration of Cr-pic improved weight gain in all group s with higher significant in the low-dose group. There was no significance between the control and the Cr-pic treated groups in the area under the blood glucose curve and serum insulin concentration plots of IPGTT and peripheral ITT in type I diabetic rats. But Cr-pic treated groups showed significantly lower levels of the area under the blood glucose currie during IPGTT and ITT and the high-dose group showed less effects compared with the low-dose group in the type II diabetic rats. The plasma insulin concentration of both diabetic groups was not influenced by Cr-pic supplementation. We can conclude that chromium picolinate may improve the endogenous and exogenous insulin action and peripheral insulin sensitivity in type II diabetic rats.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.4
• /
• pp.444-453
• /
• 2015

In the previous study, several problems were observed in a NG conversion vehicle, which were fail of air-fuel ratio closed loop control, aggravated fuel economy, increased harmful emission and declined roadability. It was provisionally supposed that the mismatch of injection system with the engine caused these performance deterioration. In this context, the characteristics of fuel injection system of commercial conversion kit for NG were investigated experimentally varying the engine speed, fuel rail pressure and volume. The results are as follows; The injection quantity decreases as the engine speed increases due to the extremely small rail volume of the presenting system and flow rate of No. 2 injector are always lower than that of the other ones regardless of the speed under the dynamic operation condition. Furthermore the existing system does not meet the required fuel quantity for the normal engine operation over 3000 RPM. On the other hands, the large rail volume systems ease and/or eliminate the difference of injection quantity between the injectors according to the speed variation, however, these systems decrease injection flow rate and still cannot supply sufficient fuel. Finally, suitable combination of the higher rail pressure and the larger rail volume might be a solution about these problems.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.22 no.3
• /
• pp.211-220
• /
• 2006

Need of porcelain-repair system is largely demanding as dental porcelain restorations are increased in clinical dentistry. This study investigated shear bond strength of commercial porcelain-repair systems on dental porcelain and their reliability. Experimental groups were as follows; Group A Super Bond C&B, Group B Porcelain repair kit, Group C Ceramic repair, and Group D Spectrum system as a control. Porcelain disks were fired and embedded in epoxy resin. Porcelain surface were ground using 220 grit SiC disk, then cleaned in ultrasonic bath. Then porcelain specimens were treated with each repair system. A clear polystyrene cylinder 3.5 mm in internal diameter was filled with composite resin. Then the resin cylinder was polymerized with a visible light curing unit. Thirty one specimens at each group were prepared and stored at $37^{\circ}C$ distilled water for 48 h. Specimens were tested in an Instron testing machine according to ISO TR 11405. Mean shear bond strength and standard deviation of each group was $15.7{\pm}4.1MPa$ (Group A), $12.8{\pm}4.9MPa$ (Group B), $7.2{\pm}3.0MPa$ (Group C) and $9.6{\pm}2.2MPa$ (Group D). ANOVA and Tukey HSD post-hoc test showed that there were significant differences between groups (p<0.05). Data of bond strength were analyzed with two-parameter Weibull distribution. Confidence interval of Weibull modulus (m-parameter) at 95% of Group A (3.5-6.3) and Group D (3.6-6.0) were significantly higher than Group B (2.2-3.7) and Group C (2.0-3.4). There was little correlation between mean shear bond strength and Weibull modulus. Results indicated that acid-etching of porcelain surface increased porcelain-resin shear bonding strength.

• The Journal of the Acoustical Society of Korea
• /
• v.33 no.3
• /
• pp.174-183
• /
• 2014

When a active sonar signal is transmitted and returned back from a target, it has been distorted by various properties of acoustic channel such as multipath arrivals. And signals have been appeared to be different form by target position and attitude. Therefore, we simulated the target echo signal using 3 dimensional target model include reflects target features. In this paper, we develop components form of a simulated target model is made up equally spaced highlight points, and each part of the target consists of shape function. We can simulate a target echo signal and Target strength (TS) according to wave incident angle. To verify, we made small scale target in kit form and we had got underwater target signal for comparing simulation result in water tank.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.11
• /
• pp.1153-1159
• /
• 2015

Recently, synthetic biopolymers and bioceramics such as poly (${\varepsilon}$-caprolactone)(PCL), hydroxyapatite, tricalcium phosphate, biphasic calcium phosphate(BCP), and zirconia have been used as substrates to generate various tissues or organs in tissue engineering. Thus, the purpose of this study was the characterization of $ZrO_2$/BCP/PCL(ZBP) scaffold for bone tissue regeneration. Based on the result of single-line test, blended 3D ZBP scaffolds with fully interconnected pores and new complex pore pattern of $45^{\circ}+135^{\circ}$-type and staggered-type were successfully fabricated using a polymer deposition system. Furthermore, the effect of ZBP scaffold on mechanical property was analyzed. In addition, in vitro cell interaction of ZBP scaffold on MG63 cells was evaluated using a cell counting kit-8(CCK-8) assay.

• Spatial Information Research
• /
• v.17 no.3
• /
• pp.371-379
• /
• 2009

Recently, GPU (Graphics Processing Unit) has been improved rapidly on the need of speed for gaming. As a result, GPU contains multiple ALU (Arithmetic Logic Unit) for parallel processing of a lot of graphics data, such as transform, ray tracing, etc. Therefore, this paper proposed a technique for parallel processing of spatial data using GPU. Spatial data consists of multiple coordinates, and each coordinate contains value of x and y axis. To display spatial data graphics operations have to be processed to large amount of coordinates. Because the graphics operation is identical and coordinates are multiple data, SIMD (Single Instruction Multiple Data) parallel processing of GPU can be used for processing of spatial data to improve performance. This paper implemented SIMD parallel processing of spatial data using two kinds of SDK (Software Development Kit). CUDA and ATI Stream are used for NVIDIA and ATI GPU respectively. Experiments that measure time of calculation for graphics operations are carried out to observe enhancement of performance. Experimental result is reported that proposed method can enhance performance up to 1,162% for graphics operations. The proposed method that uses parallel processing with GPU for spatial data can be generally used to enhance performance for applications which deal with large amount of spatial data.

• Clinical and Experimental Reproductive Medicine
• /
• v.38 no.2
• /
• pp.68-74
• /
• 2011

Objective: Previously, we found that oocyte specific homeobox (Obox) 4 plays significant role in completion of meiosis specifically at meiosis I-meiosis II (MI-MII) transition. The purpose of this study was to determine the mechanism of action of $Obox4$ in oocyte maturation by evaluating downstream signal networking. Methods: The $Obox4$ dsRNA was prepared by $in$ $vitro$ transcription and microinjected into the cytoplasm of germinal vesicle oocytes followed by $in$ $vitro$ maturation in the presence or absence of 0.2 mM 3-isobutyl-1-metyl-xanthine. Total RNA was extracted from 200 oocytes of each group using a PicoPure RNA isolation kit then amplified two-rounds. The probe hybridization and data analysis were used by Affymetrix Gene-Chip$^{(R)}$ Mouse Genome 430 2.0 array and GenPlex 3.0 (ISTECH, Korea) software, respectively. Results: Total 424 genes were up (n=80) and down (n=344) regulated after $Obox4$ RNA interference (RNAi). Genes mainly related to metabolic pathways and mitogen-activated protein kinase (MAPK) signaling pathway was changed. Among the protein kinase C (PKC) isoforms, PKC-alpha, beta, gamma were down-regulated and especially the MAPK signaling pathway PKC-gamma was dramatically decreased by $Obox4$ RNAi. In the cell cycle pathway, we evaluated the expression of genes involved in regulation of chromosome separation, and found that these genes were down-regulated. It may cause the aberrant chromosome segregation during MI-MII transition. Conclusion: From the results of this study, it is concluded that $Obox4$ is important upstream regulator of the PKC and anaphase-promoting complex action for maintaining intact germinal vesicle.