• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.56 no.1
• /
• pp.8-13
• /
• 2011

This study was carried out to compare botanical characteristics, physicochemical properties related to table quality and feed values and develop a new variety among 12 developed waxy com hybrids. These materials were produced in 2008 and cultivated in 2009 at Com Breeding and Genetics Farm of Coll. of Agri. & Life Sci., Chungnam Nat'l Univ. Botanical characteristics of used waxy com hybrids showed large difference among hybrids; stem height, ear height and ear length. In physical properties, range of kernel sugar content among used hybrids appeared 16.1 to 13.0brix(%). CNU08H-15, CNU08H-35 and CNU08H-h39 among these were highly appeared as 15 above and pericarp thickness of Yeonongchal was very thick as $46.0{\mu}m$, while CNU08H-39 among hybrids showed the thinnest as $23.0{\mu}m$ compared to other hybrids. Protein content as a indicator of table quality was the highest in Ilmichal among hybrids, while that of CNU08H-39 was the lowest, while amylopectin content was the highest as 94.5%, From experimental results, Daehakchal Gold 1, CNU08H-h121 and CNU08H-39 including check Yeonyoungchal were highly evaluated as new hybrid in thinner pericarp, high amylopectin and chewiness.

• Korean Journal of Environmental Biology
• /
• v.37 no.4
• /
• pp.726-734
• /
• 2019

To understand the relationship between water velocity in a fishway and fish morphology, the fineness ratio of fish, expressed as the standard length to the body depth, was measured. The fineness ratios of fish groups belonging to Cyprinidae, Acheilognathinae, Centropomidae, and Centrachidae were relatively low. The FRs of other groups, excluding eel-shaped types of fish, were over 4.5, indicating streamlined structures. The fineness ratios of Korean fish were classified into three different types: type I was Bitterling-Carp group that favored a slow-flowing pool habitat(FRs ranged from 2.1 to 3.3), type II was the Chub group representing streamlined types (FRs FRs ranged from 3.7 to 5.2), and type III was the Smelt-Barbel fish group that preferred riffle-run habitats with high velocity (FRs is over 5.2). Fish abundance analysis of fish using the fishway during the experimental periods showed a relatively high abundance of both type II and III compared to type I. The FRs of the fish passing through fishway(velocity 0.5-1.0 m s^-1) ranged from 4.5 to 5.0, indicating that the fish using the fishway were mainly the streamlined type. As one of the standard fishways in Korea, the flow rate of the ice harbor type ranged from 0.2 to 2.6 m s^-1. The FR values of the fish groups using the fishway ranged from 4.3 to 5.0. In contrast, the flow rate measured in an artificial channel type of fishway (same as a natural type of fishway) ranged from 0.1 to 1.9 m s^-1 and the FR values for the fish groups using a natural type of fishway ranged from 3.3 to 5.3. The low FR values in natural fish are considered to be due to differences in the flow rates between the two types of fishways.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.37 no.4
• /
• pp.302-307
• /
• 2001

The underwater background noise measured in Geoje and Tongyoung diving fishing ground from May to December, 2000 and analyzed to get optimum carrier frequency and transmitter power level for underwater wireless telephone design. The results obtained are summarized as follows: 1. At the Geoje and Tongyoung diving fishing ground, the lowest ambient noise band was 25~30kHz with 57dB and 52dB re 1$\mu$Pa, respectively. 2. At the Geoje and Tongyoung diving fishing ground, the lowest noise band during fishing activity was 67dB and 62dB re 1$\mu$Pa, respectively. 3. At the Geoje diving fishing ground, the noise of water jetter which is a digging machine for subbottom shells was 102dB re 1$\mu$Pa. 4. Considering the design parameters of underwater wireless telephone, it is found that the optimum carrier frequency band is around 30kHz and the transmitter source level should be at least 131dB re 1$\mu$Pa for 500m range telephone.

• Horticultural Science & Technology
• /
• v.34 no.6
• /
• pp.959-965
• /
• 2016

In 1994, a new cultivar 'Joyskin' was created from a cross between the cultivars 'Whangkeumbae' and 'Waseaka' at the Pear Research Institute of the National Institute of Horticultural and Herbal Science, Rural Development Administration. In 2006, the 'Joyskin' was selected from among the 317 seedlings resulting from the cross for its skin and taste qualities. Regional adaptation tests were conducted in nine regions and in ten experimental plots from 2006 to 2011. The cultivar was named in 2011. 'Joyskin' showed a vigorous growth habit and semi-spread characteristics similar to 'Whangkeumbae'. The average full bloom date for 'Joyskin' was April 21st, which was also similar to 'Whangkeumbae'. The optimum fruit ripening time was September 6-8th, which was six or eight days earlier than 'Whangkeumbae'. The fruit was round in shape and the skin was a golden yellow color at maturity. The average fruit weight was 320 g and the flesh firmness was $2.5kg/8mm{\varphi}$. The firmness of the fruit skin determined by a blade-type plunger of texture analyzer was 22.9 N, which was significantly different from that of 'Whangkeumbae' 29.9N. Stone cell analysis of 'Joyskin' by phloroglucinol-HCl, showed that 'Joyskin' stone cells were small in size and few in numbers cpmpared to those of cultivars of was 'Manpungbae', 'Niitaka', and 'Whangkeumbae'. The patent application for 'Joyskin' was submitted in April, 2012 (Grant No. 2012-337). In 2016, 'Joyskin' (Grant No. 5895) was registered as a separate record, with uniformity and stability per Korean Seed Industry Law.

• Restorative Dentistry and Endodontics
• /
• v.27 no.2
• /
• pp.142-149
• /
• 2002

Low-viscosity composite resins may produce better sealed margins than stiffer compositions (KempScholte and Davidson, 1988: Crim, 1989). Plowable composites have been recommended for use in Class V cavities but it is also controversial because of its high rates of shrinkage. On the other hand, in the study comparing elastic moduli and leakage, the microfill had the least leakage (Rundle et at. 1997) Furthermore, in the 1996 survey of the Reality Editorial Team, microfills were the clear choice for abfraction lesions. The purpose of this study was to evaluate the microleakage of 6 compostite resins (2 hybrids, 2 microfills, and 2 flowable composites) with and without load cycling. Notch-shaped Class V cavities were prepared on buccal surface of 180 extracted human upper premolars on cementum margin. The teeth were randomly divided into non-load cycling group (group 1) and load cycling group (group 2) of 90 teeth each. The experimental teeth of each group were randomly divided into 6 subgroups of 15 samples. All preparations were etched, and Single bond was applied. Preparations were restored with the following materials (n=15) : hybrid composite resin [Z250(3M Dental Products Inc. St. Paul, USA), Denfil(Vericom, Ahnyang, Korea)], microfill [Heliomolar RO(Vivadent, Schaan, Liechtenstein), Micronew(Bisco Inc. Schaumburg, IL, USA)], and flowable composite［AeliteFlo(Bisco Inc. Schaumburg, IL, USA), Revolution(Kerr Corp. Orange, CA, USA)]. Teeth of group 2 were subjected to occlusal load (100N for 50,000 cycles) using chewing simulator(MTS 858 Mini Bionix II system, MTS Systems Corp. Minn. USA). All samples were coated with nail polish 1mm short of the restoration, placed in 2％ methylene blue for 24 hours, and sectioned with a diamond wheel. Enamel and dentin/cementum margins were analyzed for microleakage on a sclale of 0 (no leakage) to 3 (3/3 of wall). Results were statistically analyzed by Kruscal-Wallis One way analysis, Mann-Whitney U-test, and Student-Newmann-Keuls method. (p = 0.05) Results : 1. There was significantly less microleage in enamel margins than dentinal margins of all groups (p＜0.05) 2. There was no significant between six composite resin in enamel margin of group 1. 3. In dentin margin of group 1, flowable composite had more microleakage than others but not of significant differences. 4. there was no significant difference between six composite resin in enamel margin of group 2. 5. In dentin margin of group 2, the microleakage were R＞A =H=M＞D＞Z. But there was no significant differences. 6. In enamel margins, load cycling did not affect the marginal microleakage in significant degree. 7. In enamel margins, load cycling did affect the marginal microleakage only in Revolution. (p＜0.05).

• Applied Biological Chemistry
• /
• v.3
• /
• pp.25-48
• /
• 1962

The polysaccharide C prepared from gum tragacanth powder (U. S. P. grade) by the precipitation method with 85% ethanol was a neutral polysaccharide, $[{\alpha}]^{30}_D-72.2$. The polysaccharide C consisted of L-rhamnose, D-xylose, L-arabinose and D-galactose in the molar ratio 2:1:17:9 (Table 1, 2, 3, ). The polysaccharide C was methylated with dimethylsulphate and 40% NaOH, and Purdies regent. The hydrolyzate of fully methlated product ($[{\alpha}]^{22}_D-102$ in chloroform, the methoxy content 40.6%) was composed of 2, 3, 5-tri-O-methyl-L-arabofuranose (I), 3,4-di-O-methyl-L-rhamnopyranose (II), 2,3-di-O-methyl-D-xylose (III), 2,3,4-tri-O-methyl-D-galactopyranose (IV), 2,4-di-O-methyl-L-arabopyranose (?), 2,4-di-O-methyl-D-galactose(VI), 2-O-methyl-D-arabinose (VII), and L-arabopyranose(VIII) (Table 4, 5, and Fig. 4). The first partial hydrolysis (A) of the polysaccharide C with 0.05N-HCl for 4.5 hours at $80-85^{\circ}C$ released only L-arabinose: the second hydrolysis (B) with 0.1N-HCl for 5 hours at $80-85^{\circ}C$, L-arabinose and D-galactose; and the third hydrolysis (C) with 0.3N-HCl at $90-95^{\circ}C$ in sealed tube, L-rhamnose, D-xylose, L-arabinose and D-galactose. From the unhydrolyzate A' were found L-rhamnose, D-xylose, L-arabinose, and D-galactose; from B' L-rhamnose, d-xylose, L-arabinose and D-galactose; and from C' D-xylose and D-galactose respectively (Table 6). The periodate consumption and formic acid production of the polysaccharide C were measured at various time intervals. After 120 hours periodat was consumed by 1.23 mole per $C_5H_8O_4$ and formic acid was produced 0.78 mole per $C_5H_8O_4$ (Table 7). Although a definite chemical structure for this polysaccharide C may not be formulated, experimental data, especially, from methylation, partial hydrolysie and determination of its molar ratio, and periodate analysis showed that the polysaccharide C is a highly branched polysaccharide and would be constructed of galactoaraban as a main chain residue and L-arabofuranose, D-galactopyranosyl $(1{\rightarrow}1)$-L-arabofuranose, D-xylopyranosyl $(1{\rightarrow}2)$-L-rhamnopyranosyl $(1{\rightarrow}1)$-L-arabofuranose, and L-rhamnopyranosyl $(1{\rightarrow}1)$-arabofuranose, and D-galactopyranosyl-$(1{\rightarrow}2)$-L-arabopyranosyl-$(1{\rightarrow}1)$-I-arabofuranose as a branch chain or end group (page 21).

• Journal of Periodontal and Implant Science
• /
• v.24 no.1
• /
• pp.131-143
• /
• 1994

For maintenance of exposed implant in healthy state, it is necessary to treat the surface of implant fixture and provide the surface adjustable to surrounding tissues. Variable techniques have been introduced such as citric acid and air-abrasive system to treat the failed implant. Although when the rough surface of HA coated implant was exposed to oral environment, the surface treatment method with citric acid or air-abrasive system is effective for removal of bacterial endotoxin, it is unsuccessful to prevent plaque deposition due to difficulty in removal of rough surface of HA coated implant. Thus, in this study the method that removes bacterial endotoxin and makes smooch surface without alteration of surface characteristics was studied. HA coated disc manufactured by IMZ Co. Was treated with high speed diamond bur, low speed diamond bur, stone bur, rubber point, jetpolisher. And then its surface state was examined with profilometer and SEM to evaluate the surface smoothness, and its surface component was analyzed with EDX to evaluate wheter the surface characteristics were altered or not. As a result, following results were obtained. When the surface roughness of each implant disc was measured by profilometer, the group I showed a $R_{max}\;2.11{\mu}m$ and the group II, III, IV, V showed a $R_{max2}\;4.17{\mu}m$, $7.28{\mu}m$, $8.61{\mu}m$ and $39.44{\mu}m$ respectively. That is, surface smoothness was highest in the group I and it has been gradually decreased in the group II, III, IV and V. Under the SEM examination, the group I showed relatively smooth surface and the group II showed slightly rougher surface than the group I due to partially remaining HA particles while most HA particle was removed. The group III and IV showed rough topography due to HA particles that was not grinded, and HA coated surface in group V showed very irregular surface with deep groove and prominence. In cross-sectional view, the group I showed uniform surface, and the group III, IV showed rough surface due to remaining HA particles but the thickness of HA coating was remarkably reduced. The group II has similar pattern in group I, and the group V showed about $40{\mu}m$ thickness although it was not constant. By analysis of surface component with EDX, the group II in which the grinding was effective showed a small quantity of calcium and phosphorous and the group III, IV, in which the grinding was incomplete showed calcium and phosphorus peak. In all experimental group, no other than titanium, aluminum, calcium, phosphorus was observed.

• Tuberculosis and Respiratory Diseases
• /
• v.46 no.6
• /
• pp.775-785
• /
• 1999

Background : The herbicide paraquat can cause severe lung injury and fibrosis in experimental animals. In this study we have investigated the changes in lung endothelin-1(Et-1) levels and immunohistochemical localization in relation to treatment with cyclophosphamide and methylprednisolone in paraquat induced pulmonary fibrosis in guinea pigs. Material and methods : 29 male Hartley guinea pigs were divided into 4 groups. Group I was normal control. Paraquat was instilled into the lung of guinea pig of group II, III and IV unilaterally. Group II was treated with cyclophosphamide and methylprednisolone. Group III was treated with methlprednisolone. Group IV was not treated. The degree of fibrosis was evaluated by H-E stains and Masson's trichrome stains and cell activity was assessed by Et-1 immunohistochemical stains. Statistical evaluation was performed using the Kruskawallis oneway analysis. Results : Paraquat induced an increase in numbers of fibroblasts and total amount of lung collagen in Group IV compared to the normal controls. There was no significant difference in total numbers of fibroblasts between any of paraquat instilled groups, but there was significant increase in total amount of collagen in Group IV compared to group II and III (p<0.05). The treatment of cyclophosphamide and methyprednisolone suppressed the growths of both fibroblasts and collagen, but this suppression was stastically significant only in the case of collagen Et-1 immunoreactivities of bronchial epithelium, type II pneumocytes, endothelial cells and fibroblast in group II and III were decreased compared to those in group IV. Conclusion : These results demonstrate that Et-1 is an important contributing factor in the pathogenesis of pulmonary fibrosis. Et-1 is synthesized and released by bronchial epithelium, Type II pneumocyte, endothelial cells, alveolar macrophages and fibroblasts. Especially they are associated with alveolar macrophage and fibroblasts. We conclude that combined therapy of cyclophosphamide and methylprednisolone are more effective in the control of Et-1 expression and collagen deposition.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.12C
• /
• pp.1288-1298
• /
• 2002

To implement elliptic curve cryptosystem in GF(2$\^$m/) at high speed, a fast divider is required. Although bit-parallel architecture is well suited for high speed division operations, elliptic curve cryptosystem requires large m(at least 163) to support a sufficient security. In other words, since the bit-parallel architecture has an area complexity of 0(m$\^$m/), it is not suited for this application. In this paper, we propose a new serial-in serial-out systolic array for computing division operations in GF(2$\^$m/) using the standard basis representation. Based on a modified version of tile binary extended greatest common divisor algorithm, we obtain a new data dependence graph and design an efficient bit-serial systolic divider. The proposed divider has 0(m) time complexity and 0(m) area complexity. If input data come in continuously, the proposed divider can produce division results at a rate of one per m clock cycles, after an initial delay of 5m-2 cycles. Analysis shows that the proposed divider provides a significant reduction in both chip area and computational delay time compared to previously proposed systolic dividers with the same I/O format. Since the proposed divider can perform division operations at high speed with the reduced chip area, it is well suited for division circuit of elliptic curve cryptosystem. Furthermore, since the proposed architecture does not restrict the choice of irreducible polynomial, and has a unidirectional data flow and regularity, it provides a high flexibility and scalability with respect to the field size m.

• The korean journal of orthodontics
• /
• v.39 no.1
• /
• pp.43-53
• /
• 2009

Objective: The purpose of this study was to compare the difference in three dimensional tooth movement using three different wire sizes($0.018{\times}0.025-in,\;0.016{\times}0.022-in$ 0.016-in) on a NiTi scissors-bite corrector. Methods: Computed tomography(CT) images of the experimental model before and after tooth movement were taken and reconstructed into three dimensional models for superimposition. The direction and the amount of tooth movement were measured and analyzed statistically. Results: The lingual and intrusive movements of the crown of the maxillary second molar were increased as the size of the NiTi wire increased. The roots of the maxillary second metals moved buccally except for the 0.016-in group. The intrusive movement of the roots of the maxillary second molars was increased as the size of the NiTi wire increased. Due to the use of orthodontic mini-implants, anchorage loss was under 0.2 mm on average. Conclusions: The $0.018{\times}0.025-in$ NiTi wire was most effective in lingual and intrusive movement of the maxillary second molar which was in scissors-bite position. Indirect skeletal anchorage with a single orthodontic mini-implant was rigid enough to prevent anchorage loss.