• 제목/요약/키워드: Experiment-Model-Design

검색결과 1,605건 처리시간 0.035초

풍속과 초기 토양수분에 따른 평면형 바이오필터 내 토양수분 안정화 및 식물 생육반응 평가 (Evaluation for Soil Moisture Stabilization and Plant Growth Response in Horizontal Biofiltration System Depending on Wind Speed and Initial Soil Moisture)

  • 최봄;천만영;이창희
    • 한국자원식물학회지
    • /
    • 제27권5호
    • /
    • pp.546-555
    • /
    • 2014
  • 연구의 최종 목표는 실내의 공간과 특성에 따라 효율적으로 실내공기질을 향상시킬 수 있는 식물 녹화와 바이오필터를 통합한 시스템의 개발이다. 그러나 이러한 목표를 달성하기 위해서는 바이오필터 시스템의 적절한 공기정화량에 대한 용량 설계에 중요한 영향을 주는 일정한 압력손실량과 토양수분 함량과 같은 여러 가지 요구사항들이 충족되어야 한다. 따라서 본 기초 연구는 바이오필터의 토양 내 균일한 분포를 갖는 토양수분 함량과 압력손실량을 유지하고 정상적인 식물 생장 특히 바람에 의한 근권부 스트레스를 받지 않도록 풍속을 적절히 조절하고, 바이오필터 내 초기 토양수분 함량이 일정하게 유지되어 안정성을 확보하기 위해 수행되었다. 본 실험에서는 평면형 바이오필터 모델을 설계하여 제작하고 세 가지 풍속(1, 2, $3cm{\cdot}sec^{-1}$)에 따른 바이오필터의 공기정화량, 공기체류시간, 기액비를 산출하였다. 또한 세가지 풍속에 따라 바이오필터 내 토양층을 통과하여 배출된 가습공기의 상대습도, 압력손실량, 토양수분 함량을 측정하고, 이 바이오필터 내에서 자란 상추와 더 피고사리의 생육을 평가하였다. 풍속 실험의 결과, 풍속 $3cm{\cdot}sec^{-1}$가 상대습도, 토양수분 함량, 식물생육을 유지하기에 가장 적절하였다. 따라서 다음 실험에서는 풍속을 $3cm{\cdot}sec^{-1}$로 고정하고 두 가지 수준의 초기 토양수분 함량(저수준 18.5%, 고수준 28.7%) 조건에서 바이오필터를 가동한 처리구와 바이오필터를 가동하지 않은 대조구(초기 토양수분 함량 29.7%)를 설정하고, 바이오필터 내 토양층을 통과하여 배출된 가습공기의 상대습도, 압력손실량, 토양수분 함량과 바이오필터 내에서 자란 상록넉줄고사리의 생육을 평가하였다. 이 실험 결과는 첫 번째 실험 결과와 유사하였으며 상대습도, 토양수분 함량, 압력손실량이 일정한 수준을 유지하였다. 또한 세 가지 초기 토양수분 함량에 따른 상록넉줄고사리의 생육도 유의성 있는 차이를 나타내지 않았다. 그러나 두 가지의 바이오필터 처리구는 대조구에 비해 건물중이 다소 증가된 것을 알 수 있었다. 따라서 주요 물리적 요소인 토양수분 함량과 압력손실량을 유지할 수 있는 본 바이오필터 시스템의 안정성은 가까운 미래에 보다 발전된 일체형 바이오필터 모델 설계에 적용될 수 있을 것으로 판단된다.

한국잔디식재 경량박층형 옥상녹화의 열수지 해석 (Heat Budget Analysis of Light Thin Layer Green Roof Planted with Zoysia japonica)

  • 김세창;이현정;박봉주
    • 한국조경학회지
    • /
    • 제40권6호
    • /
    • pp.190-197
    • /
    • 2012
  • 본 연구는 저관리 경량형 옥상녹화의 열수지를 정량화하기 위하여 모의실험을 수행하였다. 콘크리트블록을 이용하여 가로 $1.2m{\times}$세로 $1.2m{\times}$높이 1m의 모의실험구 2개를 제작하여 하나는 한국잔디를 식재한 토심 10cm의 옥상녹화 실험구로 하였으며, 옥상녹화를 실시하지 않은 나머지 하나는 대조구로 하였다. 2012년 6월 6일~7일에 기온, 상대습도, 풍향, 풍속 등 외부 기상환경, 증발산량, 옥상녹화와 대조구인 콘크리트의 표면과 천장면의 온도, 열류량, 열수지를 측정하였다. 6일과 7일의 일최고기온은 각각 $29.4^{\circ}C$$30^{\circ}C$로 초여름 날씨로는 매우 무더웠다. 6일과 7일의 일증발산량은 각각 $2,686.1g/m^2$$3,312.8g/m^2$이었으며, 일사량이 증가함에 따라 증발산량도 증가하였다. 외부 기온이 가장 높은 시간일 때의 옥상녹화 표면과 대조구 표면의 온도차이를 비교해 보면 대조구 표면이 $5.5^{\circ}C$(6일)와 $2.2^{\circ}C$(7일) 더 높은 것으로 나타났다. 옥상녹화 천장과 대조구 천장의 온도차이를 비교해 보면 $13.1^{\circ}C$(6일)와 $14.2^{\circ}C$(7일)로 나타나 옥상녹화에 의한 실내온도저감효과가 매우 큰 것으로 나타났다. 옥상녹화와 대조구인 콘크리트 표면의 열수지를 분석한 결과, 옥상녹화는 순복사량과 잠열량이 많은 비율을 차지하고 있었으나 대조구는 현열량과 전도열량의 비율이 높았다. 즉, 옥상녹화는 한국잔디와 식재토양에 의한 증발산으로 열을 식혀주는 잠열의 비율이 높은 반면에 대조구인 콘크리트 표면은 식물이 식재되어 있지 않기 때문에 열을 식혀주는 잠열은 $0W/m^2$인 반면에 주위 온도를 증가시키는 현열량과 건물내로 전달되는 전도열량의 비율이 높아 표면과 천장면의 온도를 상승시켰다. 본 연구는 옥상녹화의 온도저감과 열수지 해석을 시도했다는 점에서는 매우 의의가 크다고 할 수 있지만, 옥상녹화는 토심과 토양배합비, 식물종, 계절 등 여러 변수에 따라 온도저감효과가 다르게 나타날 수 있기 때문에 이에 대한 후속연구가 필요하다.

A hybrid algorithm for the synthesis of computer-generated holograms

  • Nguyen The Anh;An Jun Won;Choe Jae Gwang;Kim Nam
    • 한국광학회:학술대회논문집
    • /
    • 한국광학회 2003년도 하계학술발표회
    • /
    • pp.60-61
    • /
    • 2003
  • A new approach to reduce the computation time of genetic algorithm (GA) for making binary phase holograms is described. Synthesized holograms having diffraction efficiency of 75.8% and uniformity of 5.8% are proven in computer simulation and experimentally demonstrated. Recently, computer-generated holograms (CGHs) having high diffraction efficiency and flexibility of design have been widely developed in many applications such as optical information processing, optical computing, optical interconnection, etc. Among proposed optimization methods, GA has become popular due to its capability of reaching nearly global. However, there exits a drawback to consider when we use the genetic algorithm. It is the large amount of computation time to construct desired holograms. One of the major reasons that the GA' s operation may be time intensive results from the expense of computing the cost function that must Fourier transform the parameters encoded on the hologram into the fitness value. In trying to remedy this drawback, Artificial Neural Network (ANN) has been put forward, allowing CGHs to be created easily and quickly (1), but the quality of reconstructed images is not high enough to use in applications of high preciseness. For that, we are in attempt to find a new approach of combiningthe good properties and performance of both the GA and ANN to make CGHs of high diffraction efficiency in a short time. The optimization of CGH using the genetic algorithm is merely a process of iteration, including selection, crossover, and mutation operators [2]. It is worth noting that the evaluation of the cost function with the aim of selecting better holograms plays an important role in the implementation of the GA. However, this evaluation process wastes much time for Fourier transforming the encoded parameters on the hologram into the value to be solved. Depending on the speed of computer, this process can even last up to ten minutes. It will be more effective if instead of merely generating random holograms in the initial process, a set of approximately desired holograms is employed. By doing so, the initial population will contain less trial holograms equivalent to the reduction of the computation time of GA's. Accordingly, a hybrid algorithm that utilizes a trained neural network to initiate the GA's procedure is proposed. Consequently, the initial population contains less random holograms and is compensated by approximately desired holograms. Figure 1 is the flowchart of the hybrid algorithm in comparison with the classical GA. The procedure of synthesizing a hologram on computer is divided into two steps. First the simulation of holograms based on ANN method [1] to acquire approximately desired holograms is carried. With a teaching data set of 9 characters obtained from the classical GA, the number of layer is 3, the number of hidden node is 100, learning rate is 0.3, and momentum is 0.5, the artificial neural network trained enables us to attain the approximately desired holograms, which are fairly good agreement with what we suggested in the theory. The second step, effect of several parameters on the operation of the hybrid algorithm is investigated. In principle, the operation of the hybrid algorithm and GA are the same except the modification of the initial step. Hence, the verified results in Ref [2] of the parameters such as the probability of crossover and mutation, the tournament size, and the crossover block size are remained unchanged, beside of the reduced population size. The reconstructed image of 76.4% diffraction efficiency and 5.4% uniformity is achieved when the population size is 30, the iteration number is 2000, the probability of crossover is 0.75, and the probability of mutation is 0.001. A comparison between the hybrid algorithm and GA in term of diffraction efficiency and computation time is also evaluated as shown in Fig. 2. With a 66.7% reduction in computation time and a 2% increase in diffraction efficiency compared to the GA method, the hybrid algorithm demonstrates its efficient performance. In the optical experiment, the phase holograms were displayed on a programmable phase modulator (model XGA). Figures 3 are pictures of diffracted patterns of the letter "0" from the holograms generated using the hybrid algorithm. Diffraction efficiency of 75.8% and uniformity of 5.8% are measured. We see that the simulation and experiment results are fairly good agreement with each other. In this paper, Genetic Algorithm and Neural Network have been successfully combined in designing CGHs. This method gives a significant reduction in computation time compared to the GA method while still allowing holograms of high diffraction efficiency and uniformity to be achieved. This work was supported by No.mOl-2001-000-00324-0 (2002)) from the Korea Science & Engineering Foundation.

  • PDF

Design and Implementation of IoT based Low cost, Effective Learning Mechanism for Empowering STEM Education in India

  • Simmi Chawla;Parul Tomar;Sapna Gambhir
    • International Journal of Computer Science & Network Security
    • /
    • 제24권4호
    • /
    • pp.163-169
    • /
    • 2024
  • India is a developing nation and has come with comprehensive way in modernizing its reducing poverty, economy and rising living standards for an outsized fragment of its residents. The STEM (Science, Technology, Engineering, and Mathematics) education plays an important role in it. STEM is an educational curriculum that emphasis on the subjects of "science, technology, engineering, and mathematics". In traditional education scenario, these subjects are taught independently, but according to the educational philosophy of STEM that teaches these subjects together in project-based lessons. STEM helps the students in his holistic development. Youth unemployment is the biggest concern due to lack of adequate skills. There is a huge skill gap behind jobless engineers and the question arises how we can prepare engineers for a better tomorrow? Now a day's Industry 4.0 is a new fourth industrial revolution which is an intelligent networking of machines and processes for industry through ICT. It is based upon the usage of cyber-physical systems and Internet of Things (IoT). Industrial revolution does not influence only production but also educational system as well. IoT in academics is a new revolution to the Internet technology, which introduced "Smartness" in the entire IT infrastructure. To improve socio-economic status of the India students must equipped with 21st century digital skills and Universities, colleges must provide individual learning kits to their students which can help them in enhancing their productivity and learning outcomes. The major goal of this paper is to present a low cost, effective learning mechanism for STEM implementation using Raspberry Pi 3+ model (Single board computer) and Node Red open source visual programming tool which is developed by IBM for wiring hardware devices together. These tools are broadly used to provide hands on experience on IoT fundamentals during teaching and learning. This paper elaborates the appropriateness and the practicality of these concepts via an example by implementing a user interface (UI) and Dashboard in Node-RED where dashboard palette is used for demonstration with switch, slider, gauge and Raspberry pi palette is used to connect with GPIO pins present on Raspberry pi board. An LED light is connected with a GPIO pin as an output pin. In this experiment, it is shown that the Node-Red dashboard is accessing on Raspberry pi and via Smartphone as well. In the final step results are shown in an elaborate manner. Conversely, inadequate Programming skills in students are the biggest challenge because without good programming skills there would be no pioneers in engineering, robotics and other areas. Coding plays an important role to increase the level of knowledge on a wide scale and to encourage the interest of students in coding. Today Python language which is Open source and most demanding languages in the industry in order to know data science and algorithms, understanding computer science would not be possible without science, technology, engineering and math. In this paper a small experiment is also done with an LED light via writing source code in python. These tiny experiments are really helpful to encourage the students and give play way to learn these advance technologies. The cost estimation is presented in tabular form for per learning kit provided to the students for Hands on experiments. Some Popular In addition, some Open source tools for experimenting with IoT Technology are described. Students can enrich their knowledge by doing lots of experiments with these freely available software's and this low cost hardware in labs or learning kits provided to them.

크리핑 벤트그라스 훼어웨이에서 관수회수.예지물과 질소시비수준이 엽조직 및 토양 질소함유량에 미치는 효과 (A Three-year Study on the Leaf and Soil Nitrogen Contents Influenced by Irrigation Frequency, Clipping Return or Removal and Nitrogen Rate in a Creeping Bentgrass Fairway)

  • 김경남;로버트쉬어만
    • 아시안잔디학회지
    • /
    • 제11권2호
    • /
    • pp.105-115
    • /
    • 1997
  • Responses of 'Penncross' creeping bentgrass turf to various fairway cultural practices are not well-established or supported by research results. This study was initiated to evaluate the effects of irrigation frequency, clipping return or removal, and nitrogen rate on leaf and soil nitrogen con-tent in the 'Penncross' creeping bentgrass (Agrostis palustris Huds.) turf. A 'Penncross' creeping bentgrass turf was established in 1988 on a Sharpsburg silty-clay loam (Typic Argiudoll). The experiment was conducted from 1989 to 1991 under nontraffic conditions. A split-split-plot experimental design was used. Daily or biweekly irrigation, clipping return or removal, and 5, 15, or 25 g N $m-^2$ $yr-^1$ were the main-, sub-, and sub-sub-plot treatments, respectively. Treatments were replicated 3 times in a randomized complete block design. The turf was mowed 4 times weekly at a l3 mm height of cut. Leaf tissue nitrogen content was analyzed twice in 1989 and three times in both 1990 and 1991. Leaf samples were collected from turfgrass plants in the treatment plots, dried immediately at 70˚C for 48 hours, and evaluated for total-N content, using the Kjeldahl method. Concurrently, six soil cores (18mm diam. by 200 mm depth) were collected, air dried, and analyzed for total-N content. Nitrogen analysis on the soil and leaf samples were made in the Soil and Plant Analyical Laboratory, at the University of Nebraska, Lincoln, USA. Data were analyzed as a split-split-plot with analysis of variance (ANOVA), using the General Linear Model procedures of the Statistical Analysis System. The nitrogen content of the leaf tissue is variable in creeping bentgrass fairway turf with clip-ping recycles, nitrogen application rate and time after establishment. Leaf tissue nitrogen content increased with clipping return and nitrogen rate. Plots treated with clipping return had 8% and 5% more nitrogen content in the leaf tissue in 1989 and 1990, respectively, as compared to plots treated with clipping removal. Plots applied with high-N level (25g N $m-^2$ $yr-^1$)had 10%, 17%, and 13% more nitrogen content in leaf tissue in 1989, 1990, and 1991, respectively, when compared with plots applied with low-N level (5g N $m-^2$ $yr-^1$). Overall observations during the study indicated that leaf tissue nitrogen content increased at any nitrogen rate with time after establishment. At the low-N level treatment (5g N $m-^2$ $yr-^1$ ), plots sampled in 1991 had 15% more leaf nitrogen content, as compared to plots sampled in 1989. Similar responses were also found from the high-N level treatment (25g N $m-^2$ $yr-^1$ ).Plots analyzed in 1991 were 18% higher than that of plots analyzed in 1989. No significant treatment effects were observed for soil nitrogen content over the first 3 years after establishment. Strategic management application is necessary for the golf course turf, depending on whether clippings return or not. Different approaches should be addressed to turf fertilization program from a standpoint of clipping recycles. It is recommended that regular analysis of the soil and leaf tissue of golf course turf must be made and fertilization program should be developed through the interpretation of its analytic data result. In golf courses where clippings are recycled, the fertilization program need to be adjusted, being 20% to 30% less nitrogen input over the clipping-removed areas. Key words: Agrostis palustris Huds., 'Penncross' creeping bentgrass fairway, Irrigation frequency, Clipping return, Nitrogen rate, Leaf nitrogen content, Soil nitrogen content.

  • PDF

근임계수 가수분해 공정을 이용한 TDI 공정 폐기물로부터 TDA 회수 공정 최적화 (Optimization of TDA Recycling Process for TDI Residue using Near-critical Hydrolysis Process)

  • 한주희;한기도;정창모;도승회;신영호
    • Korean Chemical Engineering Research
    • /
    • 제44권6호
    • /
    • pp.650-658
    • /
    • 2006
  • 통계적 실험계획법을 이용하여 TDI 공정에서 발생하는 고체 폐기물(TDI-R)을 근임계수로 가수분해하여 TDA로 재활용하는 연구를 진행하였다. Batch 반응기를 이용한 실험으로부터 TDA 수율에 미치는 주요 인자들의 영향과 교호작용을 확인하였고, pilot plant를 이용한 연속공정 실험을 통해 TDA 수율과 공정 변수들의 상관 식을 도출하였다. TDA 수율에 영향을 주는 주요 인자들은 반응온도, 촉매 종류 및 농도, 물과 TDI-R의 중량비(WR) 등이 유효한 것으로 파악되었다. 반응 온도와 촉매 농도가 증가할수록 TDA 수율은 감소하였고, WR이 증가할수록 수율은 증가하였으며, 촉매로는 $Na_2CO_3$보다 NaOH를 사용하는 것이 효율적이었다. 주요 인자들의 교호작용으로는 촉매농도와 반응온도, WR과 반응온도, 촉매 종류와 반응시간 등이 유효한 것으로 파악되었다. 아임계 온도인 $300^{\circ}C$에서는 촉매 농도 영향이 작지만 초임계수 온도인 $400^{\circ}C$에서는 촉매 농도가 증가할수록 수율이 감소하였다. 반면 $300^{\circ}C$에서 WR이 증가하면 수율이 증가하지만 $400^{\circ}C$에서는 영향이 나타나지 않았다. Pilot plant를 이용하여 scale-up에 필요한 공정 변수의 최적화 실험을 실시하였다. 공정의 경제성, 효율성을 고려하여 공정변수로는 촉매농도와 WR을 정하였고, 중심합성 설계법을 이용하여 TDA 수율에 미치는 인자들의 영향을 파악하였다. 촉매 농도에 따라 수율은 증가하며, 촉매 농도가 낮을 때는 WR이 2.5 이하에서 수율이 최대값을 보인 후 WR이 증가함에 따라 수율이 감소하지만 촉매 농도가 증가하면서 최대값을 보이는 WR이 증가하는 경향을 보였다. Pilot plant 실험 결과를 회귀 분석하였으며 TDA 수율을 예측할 수 있도록 촉매 농도와 WR이 변수인 2차 식으로 상관식을 도출하였다.

시뮬레이션 모형에 의한 온실의 열환경 분석 (Analysis of Greenhouse Thermal Environment by Model Simulation)

  • 서원명;윤용철
    • 생물환경조절학회지
    • /
    • 제5권2호
    • /
    • pp.215-235
    • /
    • 1996
  • 본 연구에서 수행한 Model 시뮬레이션에 의한 열환경 분석 기법은 지역별로 다양한 기상여건 하에서 대상온실의 난방 및 냉방부하를 보다 합리적으로 예측할 수 있을 뿐만 아니라 냉방이나 난방용 시스템의 결정을 비롯한 난방대책을 수립하고, 에너지 이용 전략의 수립이나 계절적인 작부계획 수립, 온실산업용 적지선정 등에 유익하게 활용될 수 있을 것이라 판단된다. 본 연구에서는 온실의 적극적인 환경조절 유형을 난방과 냉방의 두 가지로 대별하고, 난방 소요열량 산정을 비롯하여 야간의 보온 커튼효과, Heating Degree-Hour 산정 등 난방과 관련된 시뮬레이션은 동적 모형을 이용하여 시간별, 일별 및 월별로 검토하였으며, 환기를 비롯한 차광, 증발냉각시스템의 효과 분석은 정적모형을 이용하여 검토하였다. 특히 하절기 지하수와 같은 저온수를 직접 이용하거나 Heat Pump를 통하여 확보될 수 있는 저온수를 이용하여 온실의 피복면에 살수함으로서 확보할 수 있는 온실냉방효과를 검토하는 데는 1.2m$\times$2.4m 크기의 모형온실을 제작하여 기초실험을 수행함으로서 동절기의 수막시스템의 보온효과와 마찬가지로 하절기 냉방 효과를 거둘 수 있다는 가능성을 확인하였다. 본 연구에 활용된 온실의 수치 환경모형 중 난방관련 시뮬레이션용 동적 수치모형은 소기의 목적을 달성하는데 충분히 응용될 수 있는 이론모형이다. 이 이론모형이 범용성이 높은 것은 온실 내ㆍ외의 미기상 변화, 특히 난방이나 냉방이 본격적으로 요구되는 기간동안에 온도, 습도, 일사, 풍속 등의 미기상 인자들을 면밀하게 관찰하여 실측된 자료를 바탕으로 개발되었고, 다양한 자료에 의해 충분히 검정되었기 때문이다. 본 연구에서는 경남 진주지역의 어느 특정 기간(1987년)의 시간별 기상자료를 중심으로 온실의 열적 환경변화에 대한 수치모형 시뮬레이션을 실시하였으며, 아직 수치모형에 의한 시뮬레이션이 불가능한 일부 냉방효과를 검토하는 데는 모형 실험을 실시하였으며, 그 결과를 요약하면 다음과 같다. 1. 주간과 야간의 설정온도를 달리하고 다단계 변온조절방식으로 시뮬레이션을 행한 결과 난방 소요열량은 난방 설정온도에 따라 현저한 차이를 보였다. 특히 주간 설정온도에 비하여 야간 설정온도가 난방 소요열량에 예민하게 영향을 미치므로 야간의 설정온도 결정에 신중을 기해야 할 것으로 판단된다. 2. 기존의 Heating Degree-Hour 자료는 평균 외기온을 중심으로 임의의 설정온도에 대하여 산정된 값이므로 난방 소요열량에 대한 상대적인 비교수단은 되나 고려되는 기상인자의 제한과 설정온도의 임의성 때문에 실용성이 부족하다. 따라서 본 연구에서 제시된 것처럼 온실 주변의 제반 미기상 인자나 경계조건이 반영됨은 물론 작물의 생육상태 및 구체적인 설정온도까지도 고려하는 동적 수치모형으로 시시각각으로 예측된 실내기온을 중심으로 재배기간 동안의 난방열량을 적산함이 합리적이라 판단된다. 기존의 MDH 자료로 난방 설계를 할 경우에는 지나치게 과잉설계 될 가능성이 있다. 3. 산정된 난방 소요열량은 물론 커튼의 보온성능도 월별 기상여건에 따라 현저한 차이를 보이며, 시뮬레이션에 이용된 커튼의 경우 높은 보온효과를 보임으로서 년 평균 50% 이상의 난방 에너지를 절감할 수 있으며, 동절기 3-4개월의 집중 난방기에 에너지가 크게 절감됨을 발견할 수 있다. 4. 고온기 환기성능은 온실의 구조, 기상조건, 작물의 생육상태 등에 따라 다소의 차이가 있으나 환기율에 의해 크게 좌우되며, 시뮬레이션에 이용된 두 가지 농가보급형 온실 모두 환기율의 증가에 따른 실내기온의 강하 효과가 환기율이 1회/min 정도를 넘어서면서 급격히 둔화되는 현상을 보인다. 이는 기존에 권장되고 있는 적정 환기율인 1회/min 전후의 환기 시스템을 갖추는 것이 합리적임을 확인해 준다. 5. 작물이 성숙된 유리온실에서 외기의 상대습도가 50%인 쾌청한 주간동안 연속적으로 1회/min로 환기를 시킬 경우 실내기온 36.5$^{\circ}C$의 대조구에 비한 온도강하는 50% 차광만 했을 시 2.6$^{\circ}C$이고 효율 80%의 Pad & Fan 시스템만 작동시 6.1$^{\circ}C$ 정도이며, 차광과 냉각시스템을 동시에 작동시는 약 8.6$^{\circ}C$로서 외기온보다 3.3$^{\circ}C$가 낮은 28$^{\circ}C$까지 실내온도를 낮출 수 있으나, 동일 조건하에서 외기의 상대습도가 80%로 높은 경우에는 Pad & Fan시스템에 의한 온도강하가 2.4$^{\circ}C$에 불과하여 50% 차광하에서도 외기온 이하로 실내온도를 낮출 수 없음을 알 수 있다. 6. 하절기 3개월(6/1-8/31)동안 Pad & Fan 시스템의 냉방효과($\Delta$T)는 설정된 작동 온도에 따라 다소 차이를 보일 것으로 예상되나 본 시뮬레이션에서 설정한 시스템의 작동 온도 27$^{\circ}C$에서 상대습도와의 상관관계는 대략 다음과 같았다: $\Delta$T= -0.077RH+7.7 7. 전형적인 하절기 주간기상 하에서 경시적 냉방효과를 분석한 결과 환기만으로는 실내기온을 외기온 보다 5$^{\circ}C$ 높게 유지하는 정도가 고작이고, 차광이나 증발식 냉방시스템 만으로는 작물이 성숙한 단계에서조차도 외기온 이하로 떨어뜨리기가 어려우나 차광과 아울러 증발식 냉방을 병행할 경우에는 작물상태에 따라 다소 차이는 있지만 실내기온을 외기온보다 2.0-2.3$^{\circ}C$ 낮게 유지할 수 있음을 발견할 수 있다. 8. 일사가 차단된 27.5-28.5$^{\circ}C$의 외기온하에서 6.5-8.5$^{\circ}C$의 냉수를 온실 바닥면적 1$m^2$당 1.3 liter/min의 유량으로 온실표면에 살수했을 때 실내기온을 외기온보다 1$0^{\circ}C$ 낮은 16.5-18.$0^{\circ}C$ 정도로 낮출 수 있었다. 앞으로 살수 수온(T$_{w}$ )이나 외기온(T$_{o}$ ) 뿐만아니라 살수율(Q)에 따라 온실기온 (T$_{g}$ )에 미치는 상관 관계 T$_{g}$ = f(T$_{w}$ , Q, T$_{o}$ )를 구명하여 지하수 자체 또는 Heat Pump를 이용한 지하수온 이하의 냉수로 온실냉방의 가능성을 구명하는 것이 앞으로의 과제이다.

  • PDF

지중 내 공동 확장에 따른 이완영역 확인을 위한 실험적 연구 (Experimental Study for Confirmation of Relaxation Zone in the Underground Cavity Expansion)

  • 김영호;김호연;김연삼;유승경;한중근
    • 한국지반신소재학회논문집
    • /
    • 제16권4호
    • /
    • pp.231-240
    • /
    • 2017
  • 최근 도심지에서 인적, 물적 피해를 초래하여 경제적 손실을 수반하는 지반함몰이 빈번히 발생하고 있다. 이는 노후화된 상하수관거의 파손으로 인한 토사유실, 다짐불량, 수평굴착, 수직굴착시 토류벽 차수미흡 등 인위적 요인에 의하여 대다수 발생한다. 지반함몰은 탐사를 통하여 사전 복구 및 보강을 통해 예방이 가능하지만 현존하는 공법으로는 긴급복구에 적용하기에 어려움이 있다. 본 연구에서는 비개착식 지반공동 긴급복구 기술 개발을 위해 지하수흐름에 의한 지중 내 공동을 모사하는 모형실험을 진행하였으며, 조성된 공동 주변을 자체제작한 이완영역탐지기를 이용하여 탐지하므로써 이완영역 범위를 추정하였다. 또, 모사지반내 형성된 공동에 석고를 주입함으로써 교란영역과 이완영역을 구분하였다. 지하수 흐름에 의한 지중 공동의 형상은 선행연구 되었던 상수관거 파손시 내부 압력에 의해 조밀한 상대밀도의 지반에서 조성된 파괴모드III와 유사하였으며, 이완영역탐지기를 이용하여 탐지된 공동은 상부에서 아칭형태로 형성됨을 확인 할 수 있었다. 또한, 지반에서 공동 중심 상부에서 이완영역과 교란영역의 길이비는 2:1로 형성되며, 외력에 대한 전단저항력의 감소의 차이인해 구분될 수 있음을 확인하였다. 즉, 사전보수 및 보강시 주입재로 사용되는 재료의 팽창성을 고려하여 2차 피해가 발생되지 않도록 주의해야함을 확인 할 수 있었으며, 추후 추가적인 실험을 통하여 다양한 지반변형 상태를 추가로 실시할 예정이다.

신갈나무 약산 전처리 공정 중 반응표면분석법을 이용한 액상 가수분해물의 furfural 수율 탐색 (Investigation of Furfural Yields of Liquid Hydrolyzate during Dilute Acid Pretreatment Process on Quercus Mongolica using Response Surface Methodology)

  • 류가희;정한섭;장수경;홍창영;최준원;최인규
    • Journal of the Korean Wood Science and Technology
    • /
    • 제44권1호
    • /
    • pp.85-95
    • /
    • 2016
  • 본 연구에서는 약산 전처리 공정을 통해 신갈나무의 액상 가수분해물로부터 유용 화합물인 furfural을 생산하였고 반응표면분석법을 이용하여 고수율의 furfural을 생산할 수 있는 최적 전처리 조건을 구명하였다. 전처리 공정은 반응표면분석법 중 중심합성계획에 의하여 설계되었으며, 독립변수는 furfural 수율에 영향을 주는 반응온도($X_1$), 산 농도($X_2$), 반응시간($X_3$)으로 지정하였다. 종속변수(Y)는 약산 전처리로부터 생성된 furfural의 농도로 설정하였고 수율(Z)은 초기 시료 중량 대비 Y를 백분율로 나타내었다. 반응표면분석 결과, 반응온도($X_1$)가 furfural 수율에 가장 큰 영향을 주는 단일 독립변수로 나타났고, 두 변수의 영향을 보았을 때는 반응온도($X_1$)-산 농도($X_2$)의 상호작용이 furfural 수율에 가장 유의적인 인자로 확인되었다. 또한 반응표면분석법을 통해 예상된 약산 전처리의 최대 furfural 수율 조건은 반응온도($X_1$) $184^{\circ}C$, 산 농도($X_2$) 1.17%, 반응시간($X_3$) 5분이었으며 예상되는 최대 furfural 수율은 초기 시료 중량 대비 6.37%로 나타났다. 상기 최적 조건에서 실제 전처리를 수행한 결과, 생산된 furfural은 6.21%로 예상 수율과 근접하였으며 이를 통해 반응표면분석법을 이용하여 약산 전처리한 신갈나무의 액상 가수분해물로부터 생산된 furfural의 최적 수율 모델을 구축할 수 있었다.

평행식 진동탄환 암거 천공기의 연구 (IV)(V)-실기 설계 제작 및 보장실험-Development of Balanced-Type Oscillating Mole Drainer(IV)(V)

  • 김용환;이승규;서상용
    • Journal of Biosystems Engineering
    • /
    • 제2권1호
    • /
    • pp.7-24
    • /
    • 1977
  • This paper is the forth and fifth one of the study on balanced type oscillating mole drainer. In the light of the results from previous reports about the model tests, some design criteria were established and a prototype machine was set up for experimental purpose. Motion characteristics and functionof the each parts of the machine were checked and analyzed. After that, performance tests of the prototype machine were carried out in thefield. Obtained results are summarized as follows ; 1. Ten centimeter of the bullet diameter was determined so as to be able to attach it to the tractors with capacity of 30 PS to 40 PS. 2. To maintain the balance between the moments of the front shank and rear shank, the oscillating amplitude of the rear bullet was determined to be larger than that of the front bullet. At the same time , the oscillating direction of the rear bullet was designed with the inclines of ten to thirty degrees. 3. An octagonal dynamo transduced was developed for measuring the compressive force of the upper link is measuring the draft force of the machine. Acceptable linear relationship between forces and strain responses from O.D.T. was obtained. 4. Analysing the balancing mechanism of the acting part of the machine , it was found that the total draft force of the machine was equal to the difference between the sum of the draft force produced from the right and left side bending moments of the lower drawber and the compressive force on the upper link. 5. There are acceptable linear relationship between the strain and twisting moment by driving shaft, and between strain and shank moment. Above results enable us to carry out the field experiment with prototype machine. 6. When the test machine was used in the field, it was possible to reduce the oscillating acceleration by forty percent in average as compared it with the single bullet mole drainer. 7. When the test machine was used under the oscillating condition, the dratt torce was reduced by 27 percent to 59 percent as compared it with the test machine under non-oscillating condition, while the draft force was increased by 7 percent to 20 percent as compared it with the mole drainer having oscillating single bullet. The reasoning behind this fact was considered as the resistance force due to the rear shank and bullet. 8. As the amplitude and frequency of the bullet were increased, the torque was increased accordingly. This tendency could be varied with the various characteristics of the given soils. And the larger frequency and amplitute, the more increasing oscil\ulcornerlating power but decreasing draft brce were needed, and draft force was increased as the velocity was increased.9. When the amplitude of the rear bullet was designed to be larger than that of the front bullet, the minimum value of the moment was lowered and oscillating acceleration was reduced. And when the oscillating direction of the rear bullet was declined back\ulcornerwards, oscillating acceleration was increased along with the increasing angle of decli\ulcornernation. When the test machine was operated in high speed, the difference between maximum moments and minimum ones became narrow. This varying magnitude of moments appeared on the moment oscillogram seems to be correlated to the oscillating acceleration and draft force. 10. From the analysis of variance, it was found that those factors such as frequency, amplitude, and operating velocity significantly affected in the oscillating acceleration, the draft resistance, the torque, the moment, and the total power required. And interaction between frequency and amplitude affected in the oscillating acceleration. 11. Within the given situation of this study, the most preferable operating conditions of the test machine were 7 Hz in oscillating frequency, 0.54 m/sec in operating velocity, and 39.1 mm in oscillating amplitude of front and rear bullets. However, it is necessary to select the proper frequency and magnitude of oscillation depending on the soil properties of the field in which the mole drainer is practiced by use of a bal1nced type oscillating mole drainer. 12. It is recommended that a comparative study of the mole drainers would be performed in the near future using two separate balanced oscillating bullet with the one which is operated by oscillating the movable bullet in a single cylinder or other balanced type which may be single oscillating bullet with spring, damper or balancing weight, and that of thing. To expand the applicability of the balanced type oscillating mole drainer in practical use, it is suggested to develop a new mechanism which perform mole drain with vinyl pipe or filling material such as rice hull.

  • PDF