• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.29 no.2
• /
• pp.397-405
• /
• 1999

Purpose: To clarify the usefulness and the limitation of Digora system/sup (R)/ by evaluating the physical characteristics as the quantitative image on Image Plate(Ip). Materials and Methods: Radiograms were taken by Heliodent MD(Siemens Co.. Germany) with the image plate for adult. Cu-step wedge as reference material. and three pieces of dry mandibular bone. Image analysis was performed by single color enhancement. density measurement with histogram. The relationship between the exposure conditions and the distribution of the pixel values of the image. the variation of pixel values of each step of Cu-step wedge at two different area and Cu-equivalent value of three pieces of dry mandibular bone measure by the conversion equation. Results: There was no linear relationship between the exposure condition and the average pixel value of the image. of which the distribution was not even. The pixel value differences between the center portion and the periphery were ranged from 60 to 70 in vertical plane and from 15 to 26 in horizontal plane. Two plot profile formed at two different areas of the Cu-step wedge were different. The measured Cu-equivalent values showed the discrepancy among the times of measurement. Conclusion: As above results. Image Plate(Ip) of Digora system/sup (R)/ showed the limitation as the quantitative image. The physical property of IP was expected to need to be compensated for the quantitative evaluation of the bone or others

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.4
• /
• pp.562-565
• /
• 2013

A new variable rate speech coding technique is proposed. The method is based on the observation that the speech signal approximately looks linear for a very short period of time. The information transmitted is the location and data value of inflection points. If the distance between the inflection points is large, the mid point location and its data value are also delivered. Thus, the encoder transmits both the location and the data value for the inflection samples, but the location only for the non-inflection points. The location information is expressed using one bit for each sample, 0 for non-inflection and 1 for inflection point. At the receiver, using the interpolation, the decoder estimates the untransmitted sample values for non-inflection locations from the received sample values for the inflection samples. With 50 % of computational cost of the existing CVSD delta modulation, the proposed method is expected to achieve the data rate of 36 to 38 kbps and the SNR of 10 to 13 dB.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.1
• /
• pp.31-36
• /
• 2020

An investigation was conducted to determine whether the ratio of the fluid to the charged particles affects the panel reflexibility rate and the drifting current flowing in the panel, in electrophoretic-based electronic paper. In this regard, three panels were produced in this study with the ratio of the charged particles to the fluid set as 1:5, 1:1, and 5:1. Each sample was driven using an identical input pulse, for which the current flowing in the panel and the output voltage of the photodiode were measured for the panel reflexibility rate. Consequently, the drifting current initially exhibited a peak value and a saturated value at a later point. This value was proportional to the ratio of the charged particles, and it was similar to this ratio when it is higher than 1:1. The output voltage of the photodiode due to the panel reflexibility rate was proportional to the ratio of the charged particles. However, the response speed decreased if the ratio was higher than 1:1. It is expected that the results of this study will contribute to the analysis of the charging of charged particles in electrophoretic-based electronic paper, and the selection of an appropriate concentration.

• Culinary science and hospitality research
• /
• v.24 no.3
• /
• pp.1-14
• /
• 2018

The purpose of this study was to determine the optimization mixing ratio of wheat sprout powder (WSP) and hemicellulase for the preparation of white pan bread. Using a response surface methodology, independent variables were WSP and hemicellulase. Dependent variables were physicochemical properties, antioxidant properties and sensory evaluation. Water binding capacity of dough increased with increasing WSP. Color value showed positive correlations with WSP. L value decreased and a, b values increased as WSP increased. The adjusted determination coefficient of texture analysis was calculated to be 0.7230~0.9446 having the p-value less than 0.1. Specific volume of bread showed a positive correlation with hemicellulase and a negative correlation with WSP. DPPH radical scavenging activity and total polyphenol were represented by a linear model and showed positive correlations with WSP. Sensory evaluation were represented by a quadratic model. In conclusion, the optimal formulation for WSP added bread, as assessed by numerical and graphical optimization methods, was WSP 2.36%, hemicellulase 0.069% per wheat flour 100 g. The above results indicate that WSP can be used as health-oriented material in the bread industry. This is also expected to meet demands of consumers who are in the pursuit of healthy food.

• Journal of the Korean Society for Precision Engineering
• /
• v.7 no.3
• /
• pp.75-82
• /
• 1990

Automatic monitoring of the cutting conditions is one of the most improtant technologies in machining. In this study, the feasibility in applying acoustic emission(AE) signals for the in-process detection of endmill wear and fracture has been investigated by performing experimental test on the NC vertical milling machine with SM45C for specimen. As the results of detecting and analyzing AE signals on various cutting conditions, the followings have confirmed. (1) The RMS value of acoustic emission is related sensitively to the cutting velocity, but is not affected largely by feed rate. (2) The burst type AE signals of high level have been observed when removing chips distorderly and discontinuously. (3) When the RMS value grows up rapidly due to the increase of wear the endmill are generally broken or fractured, but when the endmills fracture at the conditions of smooth chip-flow or built-up-edge(BUE) occurred frequently, the rapid change of the RMS arenot found. And it is expected that this technigue will be quite useful for in-process sensing of tool wear and fracture.

• The Journal of Information Technology
• /
• v.4 no.1
• /
• pp.71-79
• /
• 2001

This paper presents an adaptive back propagation algorithm that update the learning parameter by the generated error, adaptively and configuration of the range for the initial connecting weight according to the different maximum target value from minimum target value. This algorithm is expected to escaping from the local minimum and make the best environment for the convergence. On the simulation tested this algorithm on three learning pattern. The first was 3-parity problem learning, the second was $7{\times}5$ dot alphabetic font learning and the third was handwritten primitive strokes learning. In three examples, the probability of becoming trapped in local minimum was reduce. Furthermore, in the alphabetic font and handwritten primitive strokes learning, the neural network enhanced to loaming efficient about 27%~57.2% for the standard back propagation(SBP).

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.1
• /
• pp.106-111
• /
• 2010

Electronic watt hour meters(WHM) for high pressure running in domestic were installed to the digital type meter and ones for low pressure are expected to complete within several years. Domestic power metering technology is being beyond a simple framework with an electronic type and is rapidly evolving to intelligent smart metering systems in conjunction with promotion of a national smart grid project. Major policy outlook of the world's major power company regarding Intelligent metering is the application of the fare structure diversification and is the improvement of level of service to customers. In addition, electric power companies should focus on the cost reduction and the improvement of management efficiency through an efficient operation of distribution facility. In this paper, we are about to make an observation of the additional services technology development trend of the overseas smart meter and to have a view of value-added services(VAS) system of smart meter suitable for the domestic environment based on the technology development of VAS utilizing electronic watt hour meter performed by recent research projects.

• Knowledge Management Research
• /
• v.12 no.5
• /
• pp.59-69
• /
• 2011

The popularity of the social media has enabled growth of the social network, which has a big impact on culture and arts sector. The impact is based on the fact that news and evaluation of performances are communicated actively through the use of on-line community, and that the advent of social commerce makes more people see better performance at a lower price. Besides, collaboration programs called Social Sourcing are springing up in the arts sector, and there is Crowd Funding for culture & arts which is a desirable form of social funding. In this way social media and social network service (SNS) have huge social influence not only on the performing arts sector but also on the whole culture and arts sector, and are expected to have growing dominance. With SNS - which opened new marketing, publicity and donation system not only for the whole society but also for the culture and arts sector - in mind, this paper handles the topics on understanding of close relationship between SNS and performing arts, and on its current usage, value and endless possibilities. By presenting the practical value and the possibilities, this paper will help in making smooth the communication between stakeholders and audience of performing arts, in making effective the means of performance delivery, and in making enlarged the mutual understanding between performers and audience. This paper will also be the basis of an alternative means, which presents the performing arts sector with possibilities to get out of the chronic deficit.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1379-1383
• /
• 2005

Introducing the market into the electricity industry lets the multiple participants get into new competition. These multiple participants of the market need new business strategies for providing value added services to customer. Therefore they need the accurate customer information about the electricity demand. Demand characteristic is the most important one for analyzing customer information. In this study load profile data, which can be collected through the Automatic Meter Reading System, are analyzed for getting demand patterns of customer. The load profile data include electricity demand in 15 minutes interval. An algorithm for clustering similar demand patterns is developed using the load profile data. As results of classification, customers are separated into several groups. And the representative curves for the groups are generated. The number of groups is automatically generated. And it depends on the threshold value for distance to separate groups. The demand characteristics of the groups are discussed. Also, the compositions of demand contracts and standard industrial classification in each group are presented. It is expected that the classified curves will be used for tariff design, load forecasting, load management and so on. Also it will be a good infrastructure for making a value added service related to electricity.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.541-543
• /
• 2015

Due to the popularity of IT technology and smart devices, SNS (Social Networking Service), there are increasing users using. This causes increasing of data generated by the SNS may also, IT companies are developing a technique to create value in this data. In this paper, we design and implement the system that statistical information for connecting to the tweeter to create value of the data generated by the tweeter. The proposed system is a system using Mahout behind collected data and stored as a tweeter NoSQL based statistics that the contact information of the user. The developed system is expected to be helpful in providing the background technology necessary to create value in the data of the tweeter.