• Journal of the Korean Statistical Society
• /
• 제20권1호
• /
• pp.29-43
• /
• 1991

Two data-based bandwidth selectors which are optimal in the sense that they achieve n$\^$-$\frac{1}{2}$/ rate of convergence in kernel density estimation are proposed. The proposed bandwidth selectors are constructed by modifying Park and Marron's plug-in method. The first modification is taking Taylor expansion of the mean integrated squared error to two more terms than in the case of plug-in method. The second is estimating more accurately the functionals of the unknown density appeared in the minimizer of the expansion by using higher order kernels. The proposed bandwidth selectors were proved to be optimal in terms of convergence rate. According to small-sample Monte Carlo studies, the proposed bandwidth selectors showed better performance than all the other bandwidth selectors considered in the simulation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1042-1044
• /
• 1995

This paper provides the results and analyses of investigations into porcelain suspension insulators failures on the KEPCO system. The high failure rate of suspension insulators on distribution lines has been attributed to the volume expansion of the cement, the insulation puncture breakdown of the porcelain and the power arc failure. The utility must use only the good insulators and at least reduce the insulator failure rate. So, this paper recommends that the utility make test criteria(cement expansion test, steep front-of-wave flashover voltage test and power arc test. etc) on the suspension insulators.

• 설비공학논문집
• /
• 제12권5호
• /
• pp.446-475
• /
• 2000

Performance of a water-to-water multi-type heat pump system using R22 has been experimentally investigated. Total refrigerant flow rate was adjusted with a variable speed compressor and the refrigerant flow rate for two indoor units were controlled by electronic expansion valves. Evaporator outlet pressure of refrigerant and indoor unit outlet temperatures of secondary fluid were selected as controlled variables. Experiments were carried out for both cooling and heating modes using PID control method. Results show that the multi-type heat pump system can be adequately controlled by keeping control gains at certain levels for various operating conditions.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.363-366
• /
• 2005

When widening or repairing concrete deck slab, there is a joint inevitably. However, joining-construction method have following problem, that is the additional stress in existing part of bridge resulting from the specific process of joining-construction and the difference of amount of shrinkage between new and existing bridge. On this study, compared shrinkage stress of the direct joining construction method with the indirect joining construction method, and concluded the proper substitution rate of expansion cement. The rate of replacement was proper at $10\%$. but more than $15\%$, concrete had excessive expansion and weeker compressive strength. The time of placing closure concrete, considering the shinkage stresses and creep, was suitable in $45\~60$ days after placing the new concrete deck slab.

• 설비공학논문집
• /
• 제14권11호
• /
• pp.948-953
• /
• 2002

The electronic expansion valve (EEV) may be used to control the refrigerant flow rate for the multi-type heat pump. Stepping motor driven EEV may precisely control the refrigerant flow rate to meet each internal load requirement. To control the EEV, PI algorithm may be used. But the hysteresis of EEV deteriorates the performance of superheat control. To reduce the performance degradation, the PI algorithm along with the dither signal may be used. The dither signal, with about 10 times higher frequency than the system crossover frequency and about 10 times larger magnitude than the deadband of hysteresis, was selected for the superheat control of EEV. Experimental results showed the improvement of EEV control by adding the dither signal to the PI algorithm.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2005년도 동계학술발표대회 논문집
• /
• pp.439-444
• /
• 2005

Steady state simulation and dynamic simulation were performed to analyze the operational characteristics of a multi-type refrigeration system, Fully distributed model was adopted to simulate the steady state and transient responses of the system. The main aim was to see the effect of one indoor unit on the other unit. Numerical simulations were carried out for various operation conditions of an indoor unit - secondary fluid inlet temperature, mass flow rate and expansion valve opening. The results showed that the inlet temperature and mass flow rate of the secondary fluid of one indoor unit had minor effect on the operation of the other unit. However, the opening of the expansion valve had significant effect on the performance of the other unit.

• 설비공학논문집
• /
• 제13권9호
• /
• pp.810-817
• /
• 2001

Performance of a water-to-water multi-type heat pump system using R22 which has tow indoor units has been investigated experimentally. The refrigerant flow rate of each indoor unit was regulated by an electronic expansion valve and the total refrigerant flow rate of the system was controlled by a variable speed compressor. In the system, evaporator outlet pressure of refrigerant and outlet temperatures of secondary fluid from indoor units were selected as control variables. Experiments were executed for both cooling and heating modes using PID control method with fuzzy logic, and results of the test are compared with a classical PID method. In the case of PID control with fuzzy logic, the fuzzy control rules corrects PID parameters each time. Results show that PID control with fuzzy logic has the merits of quick response and reduced overshoot.

• 천문학회보
• /
• 제38권1호
• /
• pp.47.2-47.2
• /
• 2013

We have performed a set of high-resolution simulations of nuclear star-forming ring that results in an inward gas migration from the galactic disk. Our simulations consider gas heating/cooling, star formation, and supernova feedback. The galactic potential was obtained from a snapshot of a 6.3 million particle simulation of a galactic disk at 1 Gyr, which manifests spiral arms and pseudo-bulge. The potential was modeled with a combination of 3-dimensional spherical (for the pseudo-bulge) and 2-dimensional cylindrical (for the disk) multipole expansion technique. With such a potential model, one can easily set up various realistic 3-dimensional potential models by slightly changing the expansion coefficients. We have performed a set of simulations with a few million gas particles covering the central ~6 kpc of the disk for different pseudo-bulge sizes and non-axisymmetry, and we report the dependence of the gas inflow rate, size of the star-forming ring, and star-formation rate in the ring on the size and strength of the non-axisymmetry in the bulge.

• 한국항공우주학회지
• /
• 제30권2호
• /
• pp.46-51
• /
• 2002

홀 확장법은 홀 주위에 압축 잔류응력 층을 생성시킴으로서 균열 발생을 지연시키는 방법으로 항공산업 분야에서 널리 사용되고 있다. 홀 확장잔류응력의 분포는 홀 확장률, 맨드럴 삽입방향, 재료 물성치 등 여러 가지 홀 확장 파라미터에 따라 달리진다. 홀 확장 잔류응력 층의 정확한 파악이 항공사업의 실제 설계에 있어서 매우 중요함에도 불구하고 이에 대한 연구는 상대적으로 부족하였다. 본 연구에서는 3차원 유한요소해석을 통하여 알루미늄 평판에 홀 확장법을 적용하는 경우의 잔류응력 분포를 예측하고자 하였다. 유한요소해석의 타당성을 검증하기 위하여 스트레인 게이지를 이용한 홀 확장 잔류변형률을 측정하였으며, 홀 확장률과 2단 홀 확장이 잔류응력 분포에 미치는 영향을 파악하였다. 2단 홀 확장을 적용함으로써 최대 압축 잔류응력의 크기가 약 7% 향상됨을 알 수 있었다.

• 한국세라믹학회지
• /
• 제40권1호
• /
• pp.93-97
• /
• 2003

치과용 재료를 포함한 생체재료로 각광을 받고 있는 알루미나-유리복합체에 사용되는 유리침투재의 적정 조성은 열팽창계수가 중요 인자로, 적합한 열팽창계수를 가지는 적정 조성 유리 개발을 효율적으로 달성하기 위하여 다구치 실험계획법을 도입하였다. 이러한 방법을 이용하여 유리 침투재의 열팽창에 가장 많은 영향을 미치는 알칼리 산화물과 알칼리 토류 산화물의 영향을 관찰하였다. 치과용 유리침투재의 제성분들을 고려할 때 유리의 열팽창계수에 미치는 영향은 $Na_2$O≫K$_2$O≫MgO≒CaO의 순서로 $Na_2$O의 영향력은 MgO, CaO의 약 8배로 나타났으며 $K_2$O의 영향력은 MgO, CaO의 약 4배로 계산되었다. 또 각 인자간의 교호작용(interaction affects) 중 $K_2$O-CaO의 교호 작용이 가장 유의하게 나타났으며 각 인자와 교호 작용의 수준별 기여율을 계산하여 특성 조성의 열팽창 특성치를 예측하였다.