• Tunnel and Underground Space
• /
• v.30 no.4
• /
• pp.382-393
• /
• 2020

The engineered barrier system of high-level radioactive waste disposal must maintain its performance in the long term, because it must play a role in slowing the rate of leakage to the surrounding rock mass even if a radionuclide leak occurs from the canister. In particular, it is very important to clarify gas dilation flow phenomenon clearly, that occurs only in a medium containing a large amount of clay material such as a bentonite buffer, which can affect the long-term performance of the bentonite buffer. Accordingly, DECOVALEX-2019 Task A was conducted to identify the hydraulic-mechanical mechanism for the dilation flow, and to develop and verify a new numerical analysis technique for quantitative evaluation of gas migration phenomena. In this study, based on the conventional two-phase flow and mechanical behavior with effective stresses in the porous medium, the hydraulic-mechanical model was developed considering the concept of damage to simulate the formation of micro-cracks and expansion of the medium and the corresponding change in the hydraulic properties. Model verification and validation were conducted through comparison with the results of 1D and 3D gas injection tests. As a result of the numerical analysis, it was possible to model the sudden increase in pore water pressure, stress, gas inflow and outflow rate due to the dilation flow induced by gas pressure, however, the influence of the hydraulic-mechanical interaction was underestimated. Nevertheless, this study can provide a preliminary model for the dilation flow and a basis for developing an advanced model. It is believed that it can be used not only for analyzing data from laboratory and field tests, but also for long-term performance evaluation of the high-level radioactive waste disposal system.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.7
• /
• pp.833-840
• /
• 2017

For wide application of perilla leaf, which has various healthy functions and can be easily cultured across Korea, the physicochemical and sensory properties of pan bread made with various amounts of squeezed perilla leaf juice (SPLJ) were analyzed. When dough characteristics were analyzed by using farinograph, consistency and dough development time were not significantly different between the control and bread dough made with various amounts of SPLJ, whereas dough stability time increased with increasing SPLJ amount. Expansion rate of dough decreased with increasing SPLJ amount. The volume, specific volume, and baking loss rate of pan bread made with various SPLJ amounts decreased with increasing SPLJ amount. Pan bread crumb colors became thickened and greenish with increasing SPLJ amount. For physical properties of pan bread made with various SPLJ amounts, springiness and cohesiveness decreased with increasing SPLJ amount, whereas brittleness, chewiness, and hardness increased with increasing SPLJ amount. In the sensory strength analysis, pore uniformity and soft texture decreased with increasing SPLJ amount, whereas crumb color (dark greenish), perilla leaf odor, perilla leaf taste, and chewing texture increased with increasing SPLJ amount. In the overall acceptance analysis, 1.5% SPLJ was the most preferred with a score of 7.10. However, statistical differences between 1.5% and 1.0% SPLJ were not detected at P<0.05. In the partial least squares analysis, consumers liked bread with a green crumb color, perilla leaf odor, perilla leaf taste, and soft and chewing texture. In conclusion, physicochemical properties of pan bread made with SPLJ were less desirable than those of the control; however, consumer acceptance of pan bread made with 1.5% SPLJ was shown the highest. Therefore, methods for increasing physicochemical properties of pan bread made with SPLJ need to be developed for wide application of perilla leaf.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.22 no.3
• /
• pp.88-102
• /
• 2017

Long-term changes in bathymetry and grain size of surface sediments were investigated for understanding depositional sedimentary environments in the channelized Yeongsan River Estuary, Korea. The results revealed that an average depth of the estuary had decreased up to 2.1 m from 1982 to 2006, while it had increased to 0.3 m from 2006 to 2012. The rapid decrease of the water depth from 1982 to 2006 was due to the vast deposition of mud caused by the change of water course and flow velocity after the estuary was dammed. Meanwhile the increase of the water depth from 2006 to 2012 may be associated with multiple erosional processes, including a dredging at the southern part of the estuary and other erosions from the dike sluice expansion work. Considering the water-depth change and tidal-level variation in the study area, an depositional rate in the estuary is estimated to be 8~9 cm/yr for the last 2 decades (1982~2006). The sediments of Yeongsan River Estuary are largely composed of silt-clay mixtures: overall, silt is distributed mainly in the shallow area of the estuary edge, while clay is confined to the deep area of the estuary center. Mean grain size of the sediments is 6.0 Ø on average in 1997, 7.8 Ø on average in 2005 and 7.7 Ø on average in 2012, respectively, suggesting that the sediments became finer due to the increase of silt and clay contents in 1997~2005. Furthermore, several lines of evidences, including the comparison between the amounts of the sediment influx discharged from the Yeongsan River and the sediments in the estuary, and the changes in distribution pattern of silt and clay contents implying that they moved from offshore to estuary dike, indicate that the mud sediments are originated mainly from the offshore, not from the river.

• Journal of Fashion Business
• /
• v.9 no.6
• /
• pp.160-174
• /
• 2005

Despite the decrease in the number of children due to low birth rate, the domestic children's apparel market has been achieving steady growth as family income is rising thanks to more opportunities for working women, parents spend more on their children, and they prefer brand products that make their children look special. In addition, the market is suffering from hard competition as large enterprises have joined the race. The present study purposed to survey the children's apparel market in Korea, which is in a transitional period, and to contribute to the development of the market with Korean brands. For this purpose, we analyzed the characteristics of children's apparel brands in the 21st century based on the current state of the domestic children's apparel market and, based on the findings, forecasted the future trend of children's apparel brands, suggested improvements for expected problems, proposed standards for coping with changes such as diversification, high quality and differentiation in the children's apparel market, and provided consumers with information on how to purchase products. According to the result of analyzing the characteristics of children's apparel brands in the 21st century, brands are categorized largely into four types - life cultural brands, functional product brands, character brands and brands advancing to China. Life cultural brands equipped with all necessities for children are expanding, and with the deepening social problems of environmental pollution and the reduction of the child population, functional products made of environment-friendly materials are spreading widely, targeting infants and children. Furthermore, for extending age targets and diversifying products, children's apparel is using characters. The use of characters is expected to have a considerable effect on the growth of brands because children are more subjective as consumers than before and they are more easily persuaded with characters. Domestic children's apparel brands advancing to China have a high expectation of success in overcoming the limitation of the local market that has reached its peak and growing into global brands. Korean apparel makers are struggling to overcome the depressed domestic market, to recover consumers' consumption, to cope with market opening, to pursue high value of sensibility and to expand the seniors' market, etc. In this situation, future trends of children's apparel brands will be the expansion of family brands, brand totalization, quality price, niche market (pre-teen market), etc. In response to these trends, we made the following suggestions for improvement. 1. Children's apparel brands are evolving into family brands as well as into total brands through voluming. Today, however, apparel makers are advancing to the children's apparel market with the concept of adults' apparel and, as a result, children's apparel is merely adults' apparel of reduced size, having problems in design, color and materials. Thus, apparel makers must develop design considering the wide range of size and the characteristics of children's apparel, strengthen sourcing abilities to create revenues, and make thorough survey of customers to find common denominators between adults' apparel and children's apparel considering that characteristic that the target class is different from the buyer class. Furthermore, they must make active investments in human resources, develop outstanding products through advanced planning and design, and support marketing techniques and management systems to stores. 2. As the declining birth rate will continue to have a negative effect on the market, it may be difficult to expand the market size but there is still a margin for growth through high-sensibility and high-quality products. The competitiveness of brands is determined by their market shares. Accordingly, concepts should be specialized according to lifestyle, customers' diverse needs should be satisfied, and cross-coordination should be achieved within a brand. 3. Considering Korean parents who do not spare investment in their children despite shrinking consumption, functional products must be high value-added goods that can enhance efficiency. However, in the current situation of the infants' apparel industry where a textile manufacturer supply its products to multiple brands, it is difficult to develop unique products only based on materials. Thus, it is considered urgent to appeal to consumers not by relying on materials only but by finding methods of applying their own characters to children's dress.

• Korean Journal of Labor Studies
• /
• v.24 no.1
• /
• pp.107-156
• /
• 2018

This article examines the history of the in - house subcontracting and the stabilization of labor - management relations in the steel industry in Japan. The ratio of in-house subcontract workers among steel workers has increased steadily until the mid-2000s, and about 70% in case of the largest company. In-house subcontracting was used as a strategy of the company to increase the quantity flexibility of employment and to save labor costs. The in-house subcontracting company needed company-specialized skills, and the internal labor market was formed because the rate of full-time workers was high and the turnover rate was low. The in-house subcontractor introduced long-term business relationship with the steel factory by introducing the equipment and materials necessary for the performance of the work, and the factory implemented the productivity improvement policy of the in-house subcontractor, and the win-win relationship between the factory and in-house subcontractor was developed. The trade union did not oppose the idea that the expansion of in-house subcontracting contributed to corporate profits, the stability of employment of the members and maintenance of their working conditions. Since 2000, the steel factory has pursued the transformation of in - house subcontractors into subsidiaries, which has been supported by capital relations. By the way, since the mid-2000s, there has been an increase in the number of regular workers' employment. The major factors are as follows: more strengthened compliance with laws and regulations, the higher quality request of customers, stricter keeping of deadlines, and problem in recruiting of workers at in-house subcontract companies. The wage gap between the factory and in - house subcontracting was less at company B than at company S, and the wage level of in - house subcontracting was about 90% of the factory at company B. The relatively small gap at company B seems to be due to the union's movement of narrowing the gap, low market dominance and unfavorable labor market. The internal labor market has been formed in the in-house subcontracting, and the wage gap is not large, and the possibility of labor disputes is low. Industrial relations are stable in the in-house subcontract company as well as the factory. The stabilization of labor-management relations in the steel industry in Korea is required to reduce the wage gap between the factory and in-house subcontract enterprises by raising productivity and expanding the internal labor market at in-house subcontract enterprises.

• Korean Journal of Breeding Science
• /
• v.40 no.4
• /
• pp.474-478
• /
• 2008

A new covered barley variety, "Geungangbori" was developed from the cross between Milyang 55 which have lodging tolerance and easy brittleness and Suweon 260 with good quality by barley breeding team in the Yeongnam Agricultural Research Institute (YARI) in 2002. A promising line, YMB3855-3B-14-1-1-1, was selected in 1999. It was designated as the name of Milyang 110. It was prominent and had good result from regional adaptation yield trials (RAT) for three years from 2000 to 2002 and released as the name of "Geungangbori". Geungangbori is resistant to barley yellow mosaic virus and moderately resistant to powdery mildow. The average maturing date was same with Olbori on paddy field in regional adaptation yield trials for 2000-2002. Its culm length is 17 cm shorter than that of Olbori and the spike length is 4.4cm, it's longer than olbori. The 1,000 grain weight of Geungangbori was 34 g, same as Olbori, but the number of spikes per $m^2$ and test weight ware lower than those of Olbori. The yield potential of Geungangbori was 4.22 MT/ha on paddy in regional adaptation yield trials for 2000-2002. which was 7% higher than that of Olbori. The cooking quality of Geungangbori were similar to Olbori such as water absorption rate and expansion rate. But the crude protein content is lower than Olbori. This variety is suitable for double cropping system with rice in the southern part of the Korean Peninsula.

• Journal of Environmental Impact Assessment
• /
• v.30 no.5
• /
• pp.271-296
• /
• 2021

Since the thermal stratification in a reservoir inhibits the vertical mixing of the upper and lower layers and causes the formation of a hypoxia layer and the enhancement of nutrients release from the sediment, changes in the stratification structure of the reservoir according to future climate change are very important in terms of water quality and aquatic ecology management. This study was aimed to develop a data-driven inflow water temperature prediction model for Daecheong Reservoir (DR), and to predict future inflow water temperature and the stratification structure of DR considering future climate scenarios of Representative Concentration Pathways (RCP). The random forest (RF)regression model (NSE 0.97, RMSE 1.86℃, MAPE 9.45%) developed to predict the inflow temperature of DR adequately reproduced the statistics and variability of the observed water temperature. Future meteorological data for each RCP scenario predicted by the regional climate model (HadGEM3-RA) was input into RF model to predict the inflow water temperature, and a three-dimensional hydrodynamic model (AEM3D) was used to predict the change in the future (2018~2037, 2038~2057, 2058~2077, 2078~2097) stratification structure of DR due to climate change. As a result, the rates of increase in air temperature and inflow water temperature was 0.14~0.48℃/10year and 0.21~0.41℃/10year,respectively. As a result of seasonal analysis, in all scenarios except spring and winter in the RCP 2.6, the increase in inflow water temperature was statistically significant, and the increase rate was higher as the carbon reduction effort was weaker. The increase rate of the surface water temperature of the reservoir was in the range of 0.04~0.38℃/10year, and the stratification period was gradually increased in all scenarios. In particular, when the RCP 8.5 scenario is applied, the number of stratification days is expected to increase by about 24 days. These results were consistent with the results of previous studies that climate change strengthens the stratification intensity of lakes and reservoirs and prolonged the stratification period, and suggested that prolonged water temperature stratification could cause changes in the aquatic ecosystem, such as spatial expansion of the low-oxygen layer, an increase in sediment nutrient release, and changed in the dominant species of algae in the water body.

• Journal of the Korean Institute of Gas
• /
• v.27 no.3
• /
• pp.52-58
• /
• 2023

With the increasing awareness of the importance of carbon neutrality in response to global climate change, the utilization of hydrogen as a carbon-free fuel source is also growing. Hydrogen is commonly used in fuel cells (FC), but it can also be utilized in internal combustion engines (ICE) that are based on combustion. Particularly, ICEs that already have established infrastructure for production and supply can greatly contribute to the expansion of hydrogen energy utilization when it becomes difficult to rely solely on fuel cells or expand their infrastructure. However, a disadvantage of utilizing hydrogen through combustion is the potential generation of nitrogen oxides (NOx), which are harmful emissions formed when nitrogen in the air reacts with oxygen at high temperatures. In particular, for the EURO-7 exhaust regulation, which includes cold start operation, efforts to reduce exhaust emissions during the warm-up process are required. Therefore, in this study, the characteristics of nitrogen oxides and fuel consumption were investigated during the warm-up process of cooling water from room temperature to 88℃ using a 2-liter direct injection spark ignition (SI) engine fueled with hydrogen. One advantage of hydrogen, compared to conventional fuels like gasoline, natural gas, and liquefied petroleum gas (LPG), is its wide flammable range, which allows for sparser control of the excessive air ratio. In this study, the excessive air ratio was varied as 1.6/1.8/2.0 during the warm-up process, and the results were analyzed. The experimental results show that as the excessive air ratio becomes sparser during warm-up, the emission of nitrogen oxides per unit time decreases, and the thermal efficiency relatively increases. However, as the time required to reach the final temperature becomes longer, the cumulative emissions and fuel consumption may worsen.

• Health Policy and Management
• /
• v.34 no.2
• /
• pp.120-128
• /
• 2024

From February to now 2024, there continues to be controversy over the expansion of admission number to medical school. Some of the controversy arises from a mix of present and future time points. In the present time point, the controversy over whether physicians are some shortages or not has various aspects. Some aspects are presented as evidence of the physician shortage and others as non-shortage. Also, the presenting evidence of shortage is being disputed, and so is the evidence of the contrary. This controversy over whether there is a shortage or not in the present time point makes it difficult to reach a consensus. In 10 years, the shortage of doctors will increase due to the rapid increase in the elderly population, so the admission number of medical schools will need to be increased. However, the increase must be such that there is minimal deterioration in the quality of medical education. More admission numbers should be allocated to medical schools with a high quality of medical education. This study suggests that large-scale medical schools increase the admission number by 20%-30%, and small-scale medical schools increase the admission number by 40%-50%, if so, the total increasing number is 760 to 1,066. If the 2,000-person increase is enforced, the quality of medical education must be carefully evaluated and the results should be reflected in adjusting the admission number of medical schools. In 20 years later, the admission number of medical schools will have to be reduced. This is because the physician supply is changing to a linear function and the physician demand (medical care demand) is changing to a quadratic function. Even if the current number is maintained, there will be an excess of doctors from 2048, so the medical school admission number must be reduced and its size will be reduced to about 2,000, a 30% reduction from the current number. Because the same reduction rate for all medical schools will result in many small-scale medical schools, the M&A (mergers and acquisitions) strategy should be considered with 40 medical schools and 12 Korean medical schools. In Korea, the main contributor to estimating physician demand is the change in population structure. Due to the rapid decrease in the total fertility rate, future population projections are uncertain. The recent rapid increase in healthcare utilization should be reexamined in the forecasting of physician demand. Since the various factors that affect the estimate of doctor supply and demand are unclear, the estimate of physician supply and demand must be continuously conducted every five years, and the Health Care Workforce Committee must be established and operated. The effects of increasing the admission number of medical schools should be evaluated and adjusted annually.

• Journal of Distribution Research
• /
• v.17 no.5
• /
• pp.1-23
• /
• 2012

The conflict between major corporations and small and medium-sized businesses is being aggravated, the trickle down effect is not working properly, and, as the controversy surrounding the effectiveness of the business limiting system continues to swirl, the plan proposed to protect the business domain of small and medium-sized businesses, resolve polarization between these businesses and large corporations, and protect small family run stores is the suitable business type designation system for small and medium-sized businesses. The current status of carrying out this system of selecting suitable business types among small and medium-sized businesses involves receiving applications for 234 items among the suitable business types and items from small and medium-sized businesses in manufacturing, and then selecting the items of the consultative group by analyzing and investigating the actual conditions. Suitable business type designation in the service industry will involve designation with priority on business types that are experiencing social conflict. Three major classifications of the service industry, related to the livelihood of small and medium-sized businesses, will be first designated, and subsequently this will be expanded sequentially. However, there is the concern that when designated as a suitable business type or item, this will hinder the growth motive for small to medium-sized businesses, and designation all cause decrease in consumer welfare. Also it is highly likely that it will operate as a prior regulation, cause side-effects by limiting competition systematically, and also be in violation against the main regulations of the FTA system. Moreover, it is pointed out that the system does not sufficiently reflect reverse discrimination factor against large corporations. Because conflict between small to medium sized businesses and large corporations results from the expansion of corporations to the service industry, which is unrelated to their key industry, it is necessary to introduce an advanced contract method like a master franchise or local franchise system and to develop local small to medium sized businesses through a franchise system to protect these businesses and dealers. However, this method may have an effect that contributes to stronger competitiveness of small to medium sized franchise businesses by advancing their competitiveness and operational methods a step further, but also has many negative aspects. First, as revealed by the Ministry of Knowledge Economy, the franchise industry is contributing to the strengthening of competitiveness through the economy of scale by organizing existing individual proprietors and increasing the success rate of new businesses. It is also revealed to be a response measure by the government to stabilize the economy of ordinary people and is emphasized as a 'useful way' to revitalize the service industry and improve the competitiveness of individual proprietors, and has been involved in contributions to creating jobs and expanding the domestic market by providing various services to consumers. From this viewpoint, franchises fit the purpose of the suitable business type system and is not something that is against it. Second, designation as a suitable business type may decrease investment for overseas expansion, R&D, and food safety, as well negatively affect the expansion of overseas corporations that have entered the domestic market, due to the contraction and low morale of large domestic franchise corporations that have competitiveness internationally. Also because domestic franchise businesses are hard pressed to secure competitiveness with multinational overseas franchise corporations that are operating in Korea, the system may cause difficulty for domestic franchise businesses in securing international competitiveness and also may result in reverse discrimination against these overseas franchise corporations. Third, the designation of suitable business type and item can limit the opportunity of selection for consumers who have up to now used those products and can cause a negative effect that reduces consumer welfare. Also, because there is the possibility that the range of consumer selection may be reduced when a few small to medium size businesses monopolize the market, by causing reverse discrimination between these businesses, the role of determining the utility of products must be left ot the consumer not the government. Lastly, it is desirable that this is carried out with the supplementation of deficient parts in the future, because fair trade is already secured with the enforcement of the franchise trade law and the best trade standard of the Fair Trade Commission. Overlapping regulations by the suitable business type designation is an excessive restriction in the franchise industry. Now, it is necessary to establish in the domestic franchise industry an environment where a global franchise corporation, which spreads Korean culture around the world, is capable of growing, and the active support by the government is needed. Therefore, systems that do not consider the process or background of the growth of franchise businesses and harm these businesses for the sole reason of them being large corporations must be removed. The inhibition of growth to franchise enterprises may decrease the sales of franchise stores, in some cases even bankrupt them, as well as cause other problems. Therefore the suitable business type system should not hinder large corporations, and as both small dealers and small to medium size businesses both aim at improving competitiveness and combined growth, large corporations, small dealers and small to medium sized businesses, based on their mutual cooperation, should not include franchise corporations that continue business relations with them in this system.