• 공업화학
• /
• 제10권5호
• /
• pp.701-706
• /
• 1999

실록산 올리고머가 에폭시 수지의 열안정성 및 내부 응력에 미치는 영향에 대해서 고찰하였다. 분자 말단에 에폭시기를 갖는 실록산-에폭시 중합체를 실록산-DDM 예비 중합체와 DGEBA계 에폭시 수지를 반응시켜 제조하였다. TGA 데이터를 사용하여 열분해 개시 온도(initial decomposition temperature, IDT), 최대 중량 감소 시의 온도(temperature of maximum rate of weight loss, $T_{max}$), 적분 열분해 진행 온도(integral procedural decomposition temperature, IPDT), 그리고 분해 활성화 에너지($E_t$) 등을 구한 후 측정된 열안정성은 실록산 올리고머의 함량이 증가함에 따라 증가하였으며 5wt%의 실록산 올리고머를 함유한 조성에서 최대값을 나타내었다. 본 블렌드의 열팽창 계수(coefficient of thermal expansion, ${\alpha}_r$)와 굴곡 탄성률($E_r$)로부터 내부응력을 구하였으며, 실록산 올리고머의 함량이 증가할수록 ${\alpha}_r$와 $E_r$가 동시에 감소해 내부응력이 규칙적으로 저하되었다.

• 에너지공학
• /
• 제24권2호
• /
• pp.103-109
• /
• 2015

배열회수 보일러는 입구 확관 덕트와 전열관군으로 이루어져 있는데 전열관군에서 열전달 효율을 향상하기 위해서는 전열관군 전에서 배기가스 유동이 균일하게 되어야 한다. 본 연구에서는 전열관군 전의 배열회수 보일러 입구 덕트에서 유동 특성을 살펴보았고 전열관군의 열전달 메커니즘을 지금까지 다른 연구들에서 적용하였던 일정한 열전달 량으로 한 경우와 전열관군 배관의 내부와 외부의 대류열전달을 고려한 열전달 메커니즘을 적용한 경우의 해석에서 온도 분포를 비교하여 배열회수 보일러의 전열관군에서 실제 현상에 보다 적합한 열전달 메커니즘을 정립하는 것을 목적으로 하였다. 본 연구를 통하여 전열관군 배관의 내부와 외부의 대류열전달을 고려한 열전달 메커니즘을 적용한 해석이 일정한 열전달 량을 적용한 경우보다 온도 분포가 타당한 결과를 도출하였고 이렇게 적용한 경우는 배열회수 보일러 탈질설비 전단에서 온도 분포가 설계 기준 ${\pm}10^{\circ}C$에 만족함을 알 수 있었다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권2호
• /
• pp.883-898
• /
• 2019

This paper employs computational tools to predict power increase (or speed loss) and propulsion performances in waves of KVLCC2. Two-phase unsteady Reynolds averaged Navier-Stokes equations have been solved using finite volume method; and a realizable k-ε model has been applied for the turbulent closure. The free-surface is obtained by solving a VOF equation. Sliding mesh method is applied to simulate the flow around an operating propeller. Towing and self-propulsion computations in calm water are carried out to obtain the towing force, propeller rotating speed, thrust and torque at the self-propulsion point. Towing computations in waves are performed to obtain the added resistance. The regular short head waves of λ/LPP = 0.6 with 4 wave steepness of H/λ = 0.007, 0.017, 0.023 and 0.033 are taken into account. Four methods to predict speed-power relationship in waves are discussed; Taylor expansion, direct powering, load variation, resistance and thrust identity methods. In the load variation method, the revised ITTC-78 method based on the 'thrust identity' is utilized to predict propulsive performances in full scale. The propulsion performances in waves including propeller rotating speed, thrust, torque, thrust deduction and wake fraction, propeller advance coefficient, hull, propeller open water, relative rotative and propulsive efficiencies, and delivered power are investigated.

• 국제초고층학회논문집
• /
• 제10권4호
• /
• pp.265-283
• /
• 2021

To ensure that fire induced collapse of a building is prevented it is important to understand the sequence of events that can lead to this event. In this paper, the initiation of collapse mechanisms of generic a multi-storey steel frame subjected to vertical and horizontal travelling fires are analysed computationally by tracking the formation of plastic hinges in the frame and generation of fire induced loads. Both uniform and travelling fires are considered. In total 58 different cases are analysed using finite element software LS-DYNA. For the frame examined with a simple and generic structural arrangement and higher applied fire protection to the columns, the results indicate that collapse mechanisms for singe floor and multiple floor fires can be each split into two main groups. For single floor fires (taking place in the upper floors of the frame (Group S1)), collapse is initiated by the pull-in of external columns when heated beams in end bays go into catenary action. For single floor fires occurring on the lower floors(Group S2), failure is initiated (i.e. ultimate strain of the material is exceeded) after the local beam collapse. Failure in both groups for single floor fires is governed by the generation of high loads due to restrained thermal expansion and the loss of material strength. For multiple floor fires with a low number of fire floors (1 to 3) - Group M1, failure is dominated by the loss of material strength and collapse is mainly initiated by the pull-in of external columns. For the cases with a larger number of fire floors (5 to 10) - Group M2, failure is dominated by thermal expansion and collapse is mainly initiated by swaying of the frame to the side of fire origin. The results show that for the investigated frame initiation of collapse mechanisms are affected by the fire type, the number of fire floors, and the location of the fire floor. The findings of this study could be of use to designers of buildings when developing fire protection strategies for steel framed buildings where the potential for a multifloor fire exists.

• 한국해안·해양공학회논문집
• /
• 제32권6호
• /
• pp.420-433
• /
• 2020

기존 케이슨방파제의 안정성을 높이기 위해 케이슨 전면 또는 후면에 추가로 신규 케이슨을 설치하여 보강하는 경우 박리에 의한 에너지 손실효과와 케이슨과 케이슨 사이의 공극률 변화에 따른 개별 원형케이슨에 작용하는 파력 및 파처오름 특성 평가는 중요하다. 본 연구에서는 고유함수전개법에 투과성판에서의 속도는 판 전후의 압력차에 선형적으로 비례한다는 Darcy의 법칙을 이용하여 원형케이슨들간의 공극률 계수 변화에 따른 2열 배치된 원형방파제에 작용하는 파랑 특성을 분석하였다. 수치해석의 신뢰성을 확보하기 위해 Sankarbabu et al.(2008)의 수치 해석결과와 비교를 수행하였으며, 다양한 변수에 따른 개별 이중 원형케이슨에 작용하는 파력 및 파처오름 특성을 나타내었다.

• 한국해안·해양공학회논문집
• /
• 제27권5호
• /
• pp.295-303
• /
• 2015

관성항과 비선형 항력항을 포함한 직립 슬릿벽에 의한 파의 산란을 고유함수전개법을 사용하여 해석하였다. 슬릿벽에서의 에너지 손실효과를 나타내는 비선형 항력항을 등가 선형화기법으로 선형화시켰다. Yoon et al.(2006)과 Huang(2007)이 제안한 실험식을 통하여 구한 항력계수를 적용한 해석결과는 Kwon et al.(2014)과 Zhu and Chwang(2001)의 수리모형 실험결과와 비교하였고, 서로 잘 일치함을 확인하였다. 개발된 해석모델을 이용하여 슬릿벽의 주요 설계변수들인 공극률, 잠긴 깊이, 슬릿 형상, 파랑특성 등을 바꿔가면서 슬릿벽에서의 에너지 손실효과를 평가하였다. 잠긴 깊이에 따라 다소 차이는 있지만 공극률이 0.1보다 작은 값에서 슬릿벽에서의 에너지 손실률이 가장 크게 일어났다. 현재의 해석해는 슬릿벽 방파제에 의한 소파효율을 예측하는데 유용하게 이용될 것이다.

• Archives of Plastic Surgery
• /
• 제42권3호
• /
• pp.309-315
• /
• 2015

Background Breast projection is a critical element of breast reconstruction aesthetics, but little has been published regarding breast projection as the firm expander is changed to a softer implant. Quantitative data representing this loss in projection may enhance patient education and improve our management of patient expectations. Methods Female patients who were undergoing immediate tissue-expander breast reconstruction with the senior author were enrolled in this prospective study. Three-dimensional camera software was used for all patient photographs and data analysis. Projection was calculated as the distance between the chest wall and the point of maximal projection of the breast form. Values were calculated for final tissue expander expansion and at varying intervals 3, 6, and 12 months after implant placement. Results Fourteen breasts from 12 patients were included in the final analysis. Twelve of the 14 breasts had a loss of projection at three months following the implant placement or beyond. The percentage of projection lost in these 12 breasts ranged from 6.30% to 43.4%, with an average loss of projection of 21.05%. Conclusions This study is the first prospective quantitative analysis of temporal changes in breast projection after expander-implant reconstruction. By prospectively capturing projection data with three-dimensional photographic software, we reveal a loss of projection in this population by three months post-implant exchange. These findings will not only aid in managing patient expectations, but our methodology provides a foundation for future objective studies of the breast form.

• 한국경영과학회지
• /
• 제17권1호
• /
• pp.117-117
• /
• 1992

Pubilc utility industries including the electric utility industry are facing a new stream of privatization com-petition with the private sector and deregulation. The necewssity to solve now and in the future power supply and demand problems has been increasing through the sophisticated generation expansion plan(GEP) approach con-sidering not only KEPCo's supply-side resources but also outside resources such as non-utility generation(NUG) demand-side management (DSM). Under the environmental situation in the current electric utility industry a new approach is needed to acquire multiple resources competitively. This study presents the development of a modified electric generation expansion analysis system(EGEAS) model with avoided cost based on the existing EGEAS model which is a dynamic program to develope an optimal generation expansion plan for the electric utility. We are trying to find optimal GEP in Korea's case using our modified model and observe the difference for the level of reliabilities such as the reserve margin(RM) loss of load probability(LOLP) and expected unserved energy percent(EUEP) between the existing EGEAS model and our model. In addition we are trying to calculate avoided cost for NUG resources which is a criterion to evaluate herem and test possibility of connection calculation of avoided cost with GEP implementation using our modified model. The results of our case study are as follows. First we were able to find that the generation expansion plan and reliability measures were largely influenced by capacity size and loading status of NUG resources, Second we were able to find that avoided cost which are criteria to evaluate NUG resources could be calculated by using our modified EGEAS model with avoided cost. We also note that avoided costs were calculated by our model in connection with generation expansion plans.

• 한국초전도ㆍ저온공학회논문지
• /
• 제18권3호
• /
• pp.30-34
• /
• 2016

An integral crank driven Stirling cryocooler is solidly based on concepts of direct IR detector mounting on the cryocooler's cold finger, and the integral construction of the cryocooler and Dewar envelope. Performance factors of the cryocooler depend on operating conditions of the cryocooler such as a cyclic mean pressure of the working fluid, a rotational speed of driving mechanism, a thermal environment, a targeted operation temperature and etc.. At given charging condition of helium gas, the cyclic mean pressure of helium gas in the cryocooler changes with temperatures of the cold end and the environment. In this study, effects of the cyclic mean pressure of helium gas on performances of the Stirling cryocooler were investigated by numerical analyses using the Sage software. The simulation model takes into account thermodynamic losses due to an inefficiency of regenerator, a pressure drop, a shuttle heat transfer and solid conductions. Simulations are performed for the performance variation according to the cyclic mean pressure induced by the temperature of the cold end and the environment. This paper presents P-V works in the compression and expansion space, cooling capacity, contribution of losses in the expansion space.

• International Journal of Fluid Machinery and Systems
• /
• 제3권2호
• /
• pp.150-159
• /
• 2010

Laidback fan shaped film-cooling hole is formulated numerically and optimized with the help of three-dimensional numerical analysis, surrogate methods, and the multi-objective evolutionary algorithm. As Pareto optimal front produces a set of optimal solutions, the trends of objective functions with design variables are predicted by hybrid multi-objective evolutionary algorithm. The problem is defined by four geometric design variables, the injection angle of the hole, the lateral expansion angle of the diffuser, the forward expansion angle of the hole, and the ratio of the length to the diameter of the hole, to maximize the film-cooling effectiveness compromising with the aerodynamic loss. The objective function values are numerically evaluated through Reynolds- averaged Navier-Stokes analysis at the designs that are selected through the Latin hypercube sampling method. Using these numerical simulation results, the Response Surface Approximation model are constructed for each objective function and a hybrid multi-objective evolutionary algorithm is applied to obtain the Pareto optimal front. The clustered points from Pareto optimal front were evaluated by flow analysis. These designs give enhanced objective function values in comparison with the experimental designs.