• 반도체디스플레이기술학회지
• /
• 제22권4호
• /
• pp.124-130
• /
• 2023

Recently, fan out wafer level packaging, which enables high integration, miniaturization, and low cost, is being rapidly applied in the semiconductor industry. In particular, FOWLP is attracting attention in the mobile and Internet of Things fields, and is recognized as a core technology that will lead to technological advancements such as 5G, self-driving cars, and artificial intelligence in the future. However, as chip density and package size within the package increase, FOWLP warpage is emerging as a major problem. These problems have a direct impact on the reliability and electrical performance of semiconductor products, and in particular, cause defects such as vacuum leakage in the manufacturing process or lack of focus in the photolithography process, so technical demands for solving them are increasing. In this paper, warpage simulation according to the thickness of FOWLP material was performed using finite element analysis. The thickness range was based on the history of similar packages, and as a factor causing warpage, the curing temperature of the materials undergoing the curing process was applied and the difference in deformation due to the difference in thermal expansion coefficient between materials was used. At this time, the stacking order was reflected to reproduce warpage behavior similar to reality. After performing finite element analysis, the influence of each variable on causing warpage was defined, and based on this, it was confirmed that warpage was controlled as intended through design modifications.

• Geomechanics and Engineering
• /
• 제13권1호
• /
• pp.63-77
• /
• 2017

The failure mechanism of a deep hard rock tunnel under high geostress and high geothermalactivity is extremely complex. Uniaxial compression tests of granite at different temperatures were conducted. The complete stress-strain curves, mechanical parameters and macroscopic failure types of the rock were analyzed in detail. The brittleness index, which represents the possibility of a severe brittleness hazard, is proposed in this paperby comparing the peak stress and the expansion stress. The results show that the temperature range from 20 to $60^{\circ}C$ is able to aggravate the brittle failure of hard rock based on the brittleness index. The closure of internal micro cracks by thermal stress can improve the strength of hard rock and the storage capacity of elastic strain energy. The failure mode ofthe samples changes from shear failure to tensile failure as the temperature increases. In conclusion, the brittle failure mechanism of hard rock under the action of thermal coupling is revealed, and the analysis result offers significant guidance for deep buried tunnels at high temperatures and under high geostress.

• 패션비즈니스
• /
• 제26권3호
• /
• pp.98-115
• /
• 2022

The purpose of study was to analyze the process of accepting by BTS fans. The methodology used in this study was qualitative research using grounded theory and the results of the study follow. As a result of open coding, 47 concepts, 23 subcategories, and 14 categories were derived. In the axis coding stage, the casual conditions were "Recognition of BTS image," "Fascinated by BTS image," "Simple consumption of BTS image," and "Arising and expansion of curiosity about BTS image." The contextual conditions were "Accessibility of BTS image" and "Abundance of BTS image searching paths." The central phenomenon appeared to be "Immersing and studying BTS image." The arbitration conditions were "Capabilities required to reproduce BTS image" and "Motivation for contributing BTS image." The actions/interactions were "Presenting BTS image," "Contribution to the spread of BTS image," and "Involved in forming new BTS image." The result was "Emergence and expansion of new BTS image meaning" and "Strengthening attachment to BTS." Through process analysis, it was found that acceptance of BTS images consisted of five stages: "Recognition of BTS image," "Becoming curious about BTS image," "Searching BTS image," "Intervention of BTS image." and "Reproduction of BTS image." As a result of deriving the core categories through selective coding, the core category was "Forming a bond while participating in the BTS image."

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.494-498
• /
• 2001

When supersonic jet impinges on wall from the nozzle, complex flow pattern appears such as Mach disc, expansion fan, and jet boundary. The numerical computation of this supersonic jet is important on flame deflecctor design for launch space especially. In this paper, we analyzed supersonic jet structure impinging on deflector wall using three dimensional steady and unsteady compressible equation and showed temperature and pressure distribution on the wall surface. As a result, some dominant factors of jet flows are discussed for conceptual design of flame deflector.

• 플랜트 저널
• /
• 제7권2호
• /
• pp.30-38
• /
• 2011

The purpose of this paper is to review the understanding of pollution causes in the excitation system and how to solve the problem. The cause of the problem was in-leakage of bearing lubricant oil through the gap between rotor and outer in the air deflector, which was triggered by a negative pressure with respect to the operation of a collector ring fan in the collector house. In order to prevent exciting current transmission equipment pollutant, the reduction of the negative gage pressure of the inside of collector house is required. The protection in-leakage of bearing lubricant oil through the gap between rotor and outer of the air deflector are necessary. The reduction of the inside diameter of air deflector and the expansion of inlet filter of collector house are inevitable.

• Carbon letters
• /
• 제14권3호
• /
• pp.193-195
• /
• 2013

Expanded graphite (EG) was prepared using a drying process for application as an oil-adsorbent: the morphology, expansion volume, and oil absorption capacity of the EG were investigated. The expanded volume of the EG increased with an increasing reaction time and heat treatment temperature. The oil adsorption capacity of the EG was 45 g of n-dodecane per 1 g of EG. It is noted that the drying process of EG is a useful technique for a new oil-adsorbent.

• Smart Structures and Systems
• /
• 제17권2호
• /
• pp.257-274
• /
• 2016

The nonlocal static bending, buckling, free and forced vibrations of graphene nanosheets are examined based on the Kirchhoff plate theory and Taylor expansion approach. The nonlocal nanoplate model incorporates the length scale parameter which can capture the small scale effect. The governing equations are derived using Hamilton's principle and the Navier-type solution is developed for simply-supported graphene nanosheets. The analytical results are proposed for deflection, natural frequency, amplitude of forced vibration and buckling load. Moreover, the effects of nonlocal parameter, half wave number and three-dimensional sizes on the static, dynamic and stability responses of the graphene nanosheets are discussed. Some illustrative examples are also addressed to verify the present model, methodology and solution. The results show that the new nanoplate model produces larger deflection, smaller circular frequencies, amplitude and buckling load compared with the classical model.

• International Journal of Railway
• /
• 제8권2호
• /
• pp.42-45
• /
• 2015

Alkali-silica reaction (ASR) is a chemical reaction in concrete that alkalis in cement react with reactive silica in aggregate in the presence of water. When ASR takes place, it produces gels that absorb water and expand. Swelling of ASR gels can damage concrete and cause cracking and volume expansion in concrete structure. In this paper, mechanical consequences of ASR on concrete are simulated by a finite element (FE) analysis. An FE model of concrete is built. The evolution of concrete mechanical properties subjected to ASR is achieved by FE analyses. The constitutive model of concrete is attained via the FE analysis. A case study is used to demonstrate the proposed method. The simulated results using the proposed model are in good agreement with the observations of concrete with ASR reported in the literature. The results can be used for a basic research to enhance durability of concrete slab tracks and concrete railway sleepers.

• 한국안전학회지
• /
• 제27권6호
• /
• pp.54-58
• /
• 2012

This paper is purposed to analyze electric leakage component which can prevent electrical fires on breaker capacity expansion and power failure by operation of ELB(Earth leakage breaker) for stable sizes. In order to analysis for electric leakage component for stable sizes, this paper studied field state investigation which are at stable companies( 10 companies) in cheong-won location to deduce the problems of electric leakage component is analyzed. The field state experiment method is measured with electric leakage component which load part of ELB detected by electric loads(electrical fan, lighting, auto waterer, feeder and halogen lighting) and stable sizes. Results show that electric leakage component suggested in this paper are valuable and usable to electrical fire in leakage current based on environment factor, which will prevent severe damage to human beings and properties and reduce the electrical fires in stable.

• 한국항공우주학회지
• /
• 제46권4호
• /
• pp.290-296
• /
• 2018

본 연구에서는 초고속 비행체 고공환경 모사시험 설비의 운용범위를 확인하기 위하여 시험모델의 형상변수에 따라 상온시험 및 수치해석을 수행하였다. 시험 모델의 형상변수로는 폐색율, 각도 및 길이 비를 고려하였다. 폐색율은 경사충격파와 팽창 팬의 영향으로 40% 이상의 영역에서 운용이 제한될 것으로 판단된다. 각도의 변수는 강한 충격파의 영향으로 45도 이하의 크기에서 모델을 선정해야함을 확인하였다. 길이의 변수는 모델직경대비 8배의 길이 변화에도 성능의 차이가 없었다. 최종적으로 원뿔형 시험 모델의 형상 변수에 따른 성능 데이터베이스를 확보하였으며, 준 자유흐름식 고공환경 모사설비의 운용 가능한 범위를 확인할 수 있었다.