• Nuclear Engineering and Technology
• /
• v.25 no.2
• /
• pp.276-284
• /
• 1993

The ABB-CE System-80 reactor power cutback system(RPCS) is designed to enable continuous operation of the reactor without trip in the events of the loss of one of the two main feedwater pumps and loss of load, and thus improves plant availability in a cost effective manner. In this study expansion of RPCS has been investigated for continuous reactor operation without trip in the event of an inward control element assembly(CEA) deviation including a single rod drop. Under the expanded function of RPCS the control system will provide a rapid core power reduction on demand by releasing CEAs to drop into the core and reduce the turbine power, if necessary, to follow the reactor power variation. This design feature which is included as the new design features to be incorporated in the ABB-CE System-80+ meets the EPRI advanced light water reactor(ALWR) requirements. For this study core analysis models of System-80+ have been developed to simulate the nuclear steam supply system(NSSS) response as well as the RPCS initiation of rapid CEA insertion. The results of this study demonstrate that the reactor trip can be avoided in the event of inward CEA deviation including a single rod drop by the RPCS initiation and thus the plant availability and capacity factor would be increased.

• Journal of the Korean Geotechnical Society
• /
• v.32 no.2
• /
• pp.53-62
• /
• 2016

Among several factors controlling soil compaction, temperature is the factor that varies with region and season. Although earthwork is performed in many projects in the cold regions of the earth, studies on quantifying soil compaction associated with temperature are limited. This experimental study investigates the temperature effect on the soil compaction of cohesionless soil. Jumunjin sand was selected for the tests to represent cohesionless clean sand, which is widely used as an engineering fill at petrochemical projects such as northern Alberta of Canada and Russia. The laboratory test program consists of performing a series of standard proctor tests varying temperature of soil samples ranging from $-10^{\circ}C$ to $17^{\circ}C$. Test results indicate that soil specimen volume expansion occurred from bulking and its range was 0% to 6% with zero above temperature. For increasing temperature from $0^{\circ}C$ to $17^{\circ}C$, water content corresponding to maximum volume (minimum dry unit weight) was decreased and water content corresponding to minimum volume (maximum dry unit weight observed after reaching minimum dry unit weight) was slightly increased with increasing temperature. In zero below temperature, dry unit weight gradually decreased with increasing water content. In this case, no bulking effect was found and soil specimen volume increased due to the higher unit volume of ice.

• Journal of Environmental Science International
• /
• v.21 no.12
• /
• pp.1477-1485
• /
• 2012

This study examined urbanization effects and the causes of urbanization, urban population growth, increase of the city scale, land cover change, and human cultures and economic activities, using the daily minimum temperatures of the past 50 years (1961-2010) with the subject of Busan and analyzed correlations between urbanization effects and the causes of urbanization. Thereby, this paper drew a conclusion as below: 1) Due to the urbanization effects, the average annual daily minimum temperature increased as about $1.2^{\circ}C$; however, except for the factor of urbanization, the increase was shown as about $0.2^{\circ}C$. The occupancy of urbanization effects in the total temperature increase was quite high as about 83%. 2) Just like other cities experiencing urbanization, Busan, too, sees population growth and the expansion of city area as well as increased urbanization effects. First of all, correlation between population growth and urbanization effect was high as 0.96 before 1985 while it was lowered as 0.19 after 1985. Also, correlation between the increase of city area and urbanization effect was high as 0.64 and 0.79 before and after 1985. 3) Regarding the correlation between long-term land use change and urbanization effect, urbanization effect was affected greatly by the increase of city area (0.97) and reduction of green area (0.92). 4) Concerning human activities possible to affect the climatic factors of a city, this paper found the following factors: road length, car increase, power use, and the consumer price index, etc. And regarding the correlation between the three factors and urbanization effect, the correlation was higher in the consumer price index (0.97), the number of registered cars (0.89), power use (0.75), and road length (0.58) in order.

• The Journal of Korean society of community based occupational therapy
• /
• v.1 no.1
• /
• pp.19-27
• /
• 2011

Objective : The study is to suggest basic data for the expansion and the necessity of the occupational therapy at the day care center for infants with disabilities through investigating actual use and satisfaction of parents who use the day care center for infants with disabilities in Daegu Kyonbuk area. Methods : From May 15 to 29, 2009, 105 parents using the day care center for infants with disabilities were surveyed. Results : Terms of age group, parents using the day care center for infants with disabilities are mostly 30s and 40s. In terms of academic background, there were 58% of secondary school graduates and 38.9% of college graduates. Parents with experiencing 3 years of the occupational theory had 37.1%, which held the largest group. 75% of the objects agreed that infants with disabilities received enough occupational therapy, while they pointed out that the financial burden for therapy would be the major factor in the therapy. Conclusion : In order to provide a qualified occupational therapy in accordance with each individual's purpose at the day care center for infants with disabilities, it would be necessary to expand occupational therapy, to increase the demand for the occupational therapy from parents, and to secure enough number of therapists and financial support from the government and municipalities.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.3 s.36
• /
• pp.187-196
• /
• 2005

MEMS devices such as a vibratory gyroscope often suffer from a lower yield rate due to fabrication errors and the external stress. In the decoupled vibratory gyroscope, the main factor that determines the yield rate is the frequency difference between the sensing and driving modes. The gyroscope, fabricated with SOI (Silicon-On-Insulator) wafer and packaged using the anodic bonding, has a large wafer bowing caused by thermal expansion mismatch as well as non-uniform surfaces of the structures caused by the notching effect. These effects result in large distribution in the frequency difference, and thereby a lower yield rate. To improve the yield rate we propose a packaged SiOG (Silicon On Glass) technology. It uses a silicon wafer and two glass wafers to minimize the wafer bowing and a metallic membrane to avoid the notching. In the packaged SiOG gyroscope, the notching effect is eliminated and the warpage of the wafer is greatly reduced. Consequently the frequency difference is more uniformly distributed and its variation is greatly improved. Therefore we can achieve a more robust vibratory MEMS gyroscope with a higher yield rate.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.1D
• /
• pp.7-15
• /
• 2011

The travel time value is important factor for the evaluation of feasibility the transportation facility investment. The existing method for calculation of the travel time for each mode uses daily average trip purpose. So the value of travel time is constant because it is estimated with only daily average proportion. This daily constant time value can distort the results of future demands of toll roads or economic appraisals for the projects. The proportion of the trip purpose varies by time periods. Accordingly the value of travel time also varies by time periods. In this study, times periods are classified as morning peak, evening peak, business time off-peak, and non-business time off-peak. And trip purpose proportions are sorted by each time period from raw data of Seoul household trip study, then the value of travel time for each time period is estimated with these sorted purpose proportions. A case study of Seoul Jung-gu and Yongsan-gu performed with newly estimated time value by time periods. The result of benefit calculation with the daily constant time value is overestimated approximately annual 2.5 billion Won compared by time values by time periods. The demands of toll roads are also overestimated with the existing daily constant time value by daily 3,500 vehicles and total revenue of toll roads are overestimated by annually 1 billion Won. In conclusion, the value of travel time by each time period enables the more precise economic evaluation of the transportation facility investment projects, mode choice behavior, and route choice behavior especially for toll roads.

• Progress in Medical Physics
• /
• v.20 no.3
• /
• pp.119-124
• /
• 2009

Stents are frequently used throughout the human body. They keep pathways open in vascular or nonvascular duct for a long time. Therefore its stability is very important factor. In recent years, aconsiderable amount of research has been carried out in order to estimate mechanical properties of the stent such as expansion pressure behavior, radial recoil and longitudinal recoil using FEM (Finite element analyses). However, published works on simulation of stent fatigue behavior using FEM are relatively rare. In this paper, a nonlinear finite-element methodwas employed to analyses the compression of a stent using external pressure and fatigue behavior. Finite element analyses for the stent system were performed using NASTRAN FX. In conclusion this paper shows how the stent is behaved in the body, and its fatigue behavior.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.6
• /
• pp.25-35
• /
• 1998

The control system architecture in switching systems have undergone numerous changes to provide various call processing capability needed in telecommunication services. During call processing in a distributed switching control environment, the delay effect due to communication among main processors or peripheral controllers is one of the limiting factors which affect the system performance. In this paper, we propose a performance model for an IPC(Inter Processor Communication) interface hardware block which is required on the ATM cell-based message processing in a distributed ATM exchange system, and analyze the primary causes which affect the processor performance through the simulation. Consequently, It can be shown that the local CPU of the several components(resources) related to the IPC scheme is a bottleneck factor in achieving the maximum system performance from the simulation results, such as the utilization of each processing component according to the change of the input message rate, and the queue length and processing delay according to input message rate. And we also give some useful results such as the maximum message processing capacity according to the change of the performance of local CPU, and the local CPU maximum throughput according to the change of average message length, which is applicable as a reference data for the improvement or expansion of the ATM control system.

• Korean Journal of Environment and Ecology
• /
• v.27 no.6
• /
• pp.757-764
• /
• 2013

This study was conducted to determine factors causing urban temperature rises in a mixed urban and rural city in Korea. The study site was Miryang City. For this study, temperature changes over a 36 year period from 1974 to 2010, as well as changes made in the urban environment of the city were examined. Changes in the urban environment included data pertaining to both urban development and changing land use, as well as the changing lifestyle patterns of the populace. The study showed that a rise in the average annual temperature and the average annual mean-maximum temperature were statistically significant and the greatest determining factor for the temperature rise was a corresponding decrease in arable land. The study also showed that the decrease in cultivated land was directly and significantly related to an expansion of regional urbanization. There is a direct relationship between the decrease in cultivated land and an increase in the annual-mean-maximum temperature compared with annual-mean temperature. This increase can be explained as arable land works as an "island" of cooler temperatures in the hottest times of the day. A decrease of $1km^2$ of arable land is expected to cause an increase of $0.08^{\circ}C$ of annual-maximum-mean temperature and $0.06^{\circ}C$ of annual-mean temperature.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.358-358
• /
• 2017

The plant type is generally one of the most important factor for crop production and be influenced by nitrogen absorption. Soybean plants have nodules in their roots, supplying nitrogen at the vegetative and reproductive stages. Root nodules seem to effect plant type of soybean plants, but there are few reports on the relation nodules and plant type. We tried to clarify the effects of root nodules on the plant type, especially internode length and petiole length, comparing non-nodule soybean with normal soybean. The pot experiment and field experiment were carried out at Mie University and Utsunomiya University in 2015 and 2016. Enrei, a popular cultivar in central Japan, and En1282, non-nodulating isogenic line of Enrei, were used. The petiole length on main stem was measured after defoliation and internode length and yield components were measured after harvest. In the field experiment, the patterns of the final length in internode and petiole on main stem were consistent in both cultivars, and a positive correlation was found between the Nth petiole length and the N-1th internode length, belong to the same phytomere. Therefore, the petiole and internode on the main stem make similar response for environmental factors. In pot experiment, Enrei grew with the same pattern as field experiments, but in En1282, the elongation of petiole and internode in the upper part was suppressed, especially the petiole was suppressed greatly. The main stem becomes the basis of the plant type. These results were considered that the nitrogen is distributed preferentially to the internode than the petiole. It seems that the pot cultivation restricted the rhizosphere and caused nitrogen deficiency in En1282. These results suggested that the slight nitrogen deficiency provided from the root nodules was compensated by the increase of the amount of inorganic nitrogen absorption due to the expansion of the rhizosphere, and the severe nitrogen deficiency suppressed elongation of petiole and internode. It is clear that root nodules effect the plant type by supplying nitrogen to internodes and petioles.