• 에너지공학
• /
• 제21권4호
• /
• pp.362-372
• /
• 2012

원전의 증기발생기 전열관은 압력경계 부위로 결함발생으로 인한 누설 시 방사능물질을 함유한 1차 계통의 냉각수가 2차 계통으로 새어나와 발전소 및 대기를 오염시키게 된다. 근래에 전열관의 균열결함은 대개 응력 부식균열이며 전열관의 확관부위, 슬러지 침적부위 그리고 U-bend 등에서 발생한다. 확관부위 및 U-bend 등에서의 균열발생인자 중 가장 영향을 미치는 인자는 잔류응력이다. 폭발확관법이 적용된 한국표준형원전(OPR-1000)의 운전경험에 따르면, 증기발생기 전열관 확관부위에서 가동 초기부터 응력부식균열이 발생해 왔으며, 특히 원주방향 균열이 대량 발생하고 있다. 따라서 본 연구에서는 확관방법에 따른 잔류응력의 분포 및 상태를 비교하였으며, 특정 방향이 우세한 원인을 살펴보았다.

• 에너지공학
• /
• 제22권2호
• /
• pp.148-155
• /
• 2013

한국표준형원전(OPR-1000)의 증기발생기 전열관은 관재료로 Alloy 600과 Alloy 690이 사용되고 있으며 전열관 확관방법은 폭발확관법이 적용되었다. 원전 운전경험에 따르면 전열관 확관법으로 폭발확관법이 사용된 증기발생기의 전열관들은 원주방향 균열이 잘 발생하였으며 그 위치는 전열관의 확관천이부위 외면이었고 슬러지에 의해 둘러싸인 지역이었다. 그러나 같은 조건의 전열관이라도 수압확관법이 적용된 경우는 원주방향 균열보다는 축방향 균열이 우세한 경향을 보여왔다. 따라서 본 연구에서는 상기와 같은 차이를 규명하기 위하여 전열관과 관판의 형상을 모델링하였으며 확관법에 따라 운전중 조건에서 전열관의 확관천이 부위에 작용하는 응력의 크기를 전산프로그램을 사용하여 계산하였고, 균열의 방향성과 우세성을 평가하였다.

• 한국세라믹학회지
• /
• 제40권11호
• /
• pp.1127-1131
• /
• 2003

인삼염유리는 전자부품분야에서 저온소성유리로 그 활용범위가 넓은 편이나 높은 열팽창계수로 알칼리 산화물 등을 첨가하여 그 특성을 조정하고 있다. 본 연구에서는 P$_2$O$_{5}$-SnO-ZnO-SiO$_2$/B$_2$O$_3$ 유리계에 대하여 열적특성으로 선팽창계수와 유리전이온도, 용융온도 등을 측정하여 그들 값의 상관관계를 고찰하였다. 이러한 결과는 다른 인삼염 유리와 비교하였을때 선팽창계수와 유리전이온도의 곱이 일정한 값으로 나타나서 이들 중의 하나의 값으로부터 간접적으로 다른 변수를 측정 할 수 있는 한 방법이 될 수 있다.

• 비파괴검사학회지
• /
• 제26권3호
• /
• pp.174-180
• /
• 2006

Steam generator (SG) tubes are expanded inside tubesheet holes by using explosive or hydraulic methods to be fixed in a tubesheet. In the tube expansion process, it is important to minimize the crevice gap between expanded tube and tube sheet. In this paper, absolute and differential signals are computed by a numerical method for several different locations of tube expansion inside and outside a tubesheet and signal variations due to tubesheet, tube expansion and operating frequencies are observed. Results show that low frequency is good for detecting tubesheet location in both types of signals and high frequency is suitable for sizing of tube diameter as well as the detection of transition region. Also learned is that the absolute signal is good for measuring tube diameter, while the differential signal is good for locating the top of tubesheet and both ends of the transition region. In the case of mingled anomaly with tube expansion and tubesheet, low frequency inspection is found to be useful to analyze the mixed signal.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(II)
• /
• pp.117-122
• /
• 2003

Cheongdam Bridge in Seoul Metropolitan Subway Line No.7 recently constructed has 180 meters (2@90m) of expansion length of structure (distance between fixed points). Track type is all ballasted track and rail expansion joint is installed at every movable point. However, there is no expansion joint at the transition area between ballasted track ,end deck. By this reason, the rail buckling has been occurred every year and there is actually an abnormal behavior in expansion. In this study, based on the modeling of the Cheongdam Bridge, the element of interacting relationship between track and structure which is influential to track displacement in long-span bridge was analyzed and, finally, the methodology to ensure the continuous-welded rail in Cheongdam Bridge was suggested.

• 에너지공학
• /
• 제23권2호
• /
• pp.149-157
• /
• 2014

원자력발전소의 증기발생기 전열관은 가동 중에 다양한 형태의 부식 손상이 발생한다. 전열관의 외면에 발생하는 응력부식균열은 2차측 응력부식균열이라 불리는데 주로 전열관의 확관천이지역에서 발생한다. 그 원인은 이 지역의 기하학적 특성과 관련된 슬러지의 침적에 의한 불순물의 농축과 증기 발생기 제작과정에서 확관에 의한 잔류응력이다. 특히 잔류응력은 확관방법에 따라 방향성 및 그 크기가 달라지는데 전열관에 발생하는 균열의 방향 및 발생빈도는 이와 관련이 있다. 현장 경험에 따르면, 폭발확관된 전열관은 수압확관된 전열관에 비해 확관천이 부위에서 원주방향 균열이 잘 발생하는 것으로 나타났다. 따라서 본 연구에서는 예민화된 증기발생기 전열관에 대한 응력부식균열 시험을 통해 확관법에 따른 특정방향 균열의 발생빈도 및 균열 크기를 비교하였다. 또한 균열이 발생된 전열관의 파단면 검사를 통해 균열 양상과 수화학 환경 중의 특정 성분의 영향을 관찰하였다.

• 한국항공우주학회지
• /
• 제45권5호
• /
• pp.367-375
• /
• 2017

본 연구에서는 초음속 영역에서의 해머헤드형 노즈 페어링을 포함하고 있는 발사체 선두부에 대한 RANS 전산해석을 수행하였다. 층류, 완전 난류, 천이 모델을 이용한 2차원 축대칭 해석을 수행하여 실험 결과와 비교하였다. 레이놀즈수의 변화에 따라서 다른 유동현상이 나타남을 확인하였다. 높은 레이놀즈수에서는 경계층이 난류가 되어 발사체 표면에서 박리가 되지 않는다. 낮은 레이놀즈수 조건에서는 해머헤드형 노즈 페어링의 팽창-압축 모서리에서 경계층의 박리와 재부착으로 층류 박리 거품이 만들어진다. 받음각이 있는 3차원 계산에서 층류 박리 거품으로 발생되는 와류 구조를 확인할 수 있었다. 레이놀즈수에 따른 박리 거품을 예측하기 위해서 난류 천이를 고려해야 함을 확인할 수 있었다.

• 한국압력기기공학회 논문집
• /
• 제15권1호
• /
• pp.18-27
• /
• 2019

The Advanced Power Reactor 1400 (APR1400) Steam Generator (SG) uses alloy 690 as a tube material and SA-508 Grade 3 Class 1 as a tubesheet material to form tube-to-tubesheet joint through hydraulic expansion process. In this paper, the residual stresses in the SG tube-to-tubesheet contact area was investigated by applying Model-Based System Engineering (MBSE) methodology and the V-model. The use of MBSE transform system description into diagrams which clearly describe the logical interaction between functions hence minimizes the risk of ambiguity. A theoretical and Finite Element Methodology (FEM) was used to assess and compare the residual stresses in the tube-to-tubesheet contact area. Additionally, the axial strength of the tube to tubesheet joint based on the pull-out force against the contact joint force was evaluated and recommended optimum autofrettage pressure to minimize residual stresses in the transition zone given. A single U-tube hole and tubesheet with ligament thickness was taken as a single cylinder and plane strain condition was assumed. An iterative method was used in FEM simulation to find the limit autofrettage pressure at which pull-out force and contact force are of the same magnitude. The joint contact force was estimated to be 20 times more than the pull-out force and the limit autofrettage pressure was estimated to be 141.85MPa.

• Asia Marketing Journal
• /
• 제15권2호
• /
• pp.29-47
• /
• 2013

Distribution channel decisions involve long-term commitments with other firms that are very difficult to change or replace. In particular, marketing channel decisions in emerging markets are much more complicated due to unfamiliar conditions and problems such as lack of market data and distribution systems. Therefore, when a company considers changing or introducing a marketing channel in an area, it is much more difficult to judge its effectiveness in an emerging market than in a developed market. In this study, we investigate the development process of a new direct marketing channel of Hongfu Fertilizer Company (hereafter Hongfu), a medium-sized Chinese fertilizer manufacturer, and propose an approach to test the feasibility of this new marketing channel in the Chinese rural market. We measure the effectiveness of Hongfu's new marketing channel from two perspectives: i) from customers' perspective through direct responses of farmers, which showed that a new channel can increase the convenience and lower the purchasing costs for the farmers, and ii) from the company's perspective, by calculating the incremental profit of the company using the expansion factor (T/Q) method, which suggested that the execution of Hongfu's strategy to expand a new marketing channel will result in an increase in profits. The results of this study contribute to the development of a methodology to test the feasibility of a new direct marketing channel in the emerging markets such as the Chinese rural market. Traditional and indirect distribution channels in emerging markets are generally not very efficient and difficult to change. Especially, in emerging markets, like the Chinese rural market, the methods of testing channel feasibility must be different from that of developed markets. Considering market situations, market experiments can be more effective then systematic market surveys in testing channel feasibility in emerging markets. This study implies that managers must learn to cope with a transition from the traditional marketing channels in emerging markets. With the development in farmers' understanding of marketing concept, the transition from traditional marketing channel is unavoidable for all firms. Farmers in China are generally very conservative, however, their buying behaviors are changing. Therefore, fertilizer companies should try to adjust in accordance with farmers' demand characteristics that the efforts to meet the economic needs of farmers with new marketing channels as well as trust building are critical in the near future.

• 한국IT서비스학회지
• /
• 제19권5호
• /
• pp.33-47
• /
• 2020

In recent years, due to the demand for operating efficiency and cost reduction of industrial facilities, remote access via the Internet is expanding. the control network accelerates from network separation to network connection due to the development of IIoT (Industrial Internet of Things) technology. Transition of control network is a new opportunity, but concerns about cybersecurity are also growing. Therefore, manufacturers must reflect security compliance and standards in consideration of the Internet connection environment, and enterprises must newly recognize the connection area of the control network as a security management target. In this study, the core target of the control system security threat is defined as the network boundary, and issues regarding the security architecture configuration for the boundary and the role & responsibility of the working organization are covered. Enterprises do not integrate the design organization with the operation organization after go-live, and are not consistently reflecting security considerations from design to operation. At this point, the expansion of the control network is a big transition that calls for the establishment of a responsible organization and reinforcement of the role of the network boundary area where there is a concern about lack of management. Thus, through the organization of the facility network and the analysis of the roles between each organization, an static perspective and difference in perception were derived. In addition, standards and guidelines required for reinforcing network boundary security were studied to address essential operational standards that required the Internet connection of the control network. This study will help establish a network boundary management system that should be considered at the enterprise level in the future.