• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.54 no.3
• /
• pp.239-245
• /
• 2018

International Maritime Organization (IMO) has established standards for ship manoeuvrability and applied these standards for vessels over 100 meters in length that built since 2004 (IMO, resolution MSC.137[76]). These standards are no exception to fishing vessels. In this study we carried out a manoeuvring simulation of the new model ship (Stern trawler) of fisheries training ship of Pukyong National University based on Kijima's empirical formula. The formula takes into account of the effect of stern shape or does not take into account of the effect of stern shape. Also we checked whether the simulation results of turning motion of model ship meet IMO manoeuvrability criteria and then compared trajectories between the simulation results of model ship and the results of real sea trial test of the existing ship. In conclusion, Kijima's empirical formulas can estimate the manoeuvrability of fishing vessels at design stage approximately, it needs more parameters of fishing vessel own in case of expressing the manoeuvrability of fishing vessel accurately.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.10
• /
• pp.935-941
• /
• 2016

Predicting and evaluating ship manoeuvring characteristics are very important not only for the design stage, but also for the existing vessels. There are several ways to predict ship's manoeuvrability and most of them are highly connected with the estimation of hydrodynamic coefficients. This paper presents a new estimation method using the system identification with mathematical algorithms for estimating hydrodynamic coefficient in the ship's mathematical model. Specifically a double ended ferry which equips four azimuth propulsion systems were chosen as benchmark ship and a set of benchmark data which is generated in the fast time simulation software was provided to conduct mathematical optimization process. Also the initial values for the optimization were borrowed from the empirical regression formulas of the simulation software of Rheinmetall Defence ship simulator. Therefore the newly suggested mathematical optimization algorithm gave a successful result for estimation hydrodynamic coefficients. Proper optimization conditions of the objective function and constraints were also verified during the study.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.51-54
• /
• 2007

This study is aimed to acquire the depth information and measure the water volume of reservoir using the robot-ship equipped with GPS and echosounder. Robot-ship is an automatic system for measuring exact depth and bed topography. According to field experiment results, measured water volume by the robot-ship data was not much exceeding 6.8% in comparison with existing water volume data, and it was guessed because of sediments of reservoir bottom. The robot-ship could be used to acquire economically and exactly the water depth and bed topography of reservoirs, dams, rivers and so on.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.3 no.4
• /
• pp.225-232
• /
• 2011

In the present study, a new hull panel generation algorithm, namely panel cutting method, was developed to predict flow phenomena around a ship using the Rankine source potential based panel method, where the iterative method was used to satisfy the nonlinear free surface condition and the trim and sinkage of the ship was taken into account. Numerical computations were performed to investigate the validity of the proposed hull panel generation algorithm for Series 60 ($C_B$=0.60) hull and KRISO container ship (KCS), a container ship designed by Maritime and Ocean Engineering Research Institute (MOERI). The computational results were validated by comparing with the existing experimental data.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.10
• /
• pp.2316-2322
• /
• 2012

The present study investigates a standardized framework for support system of ship design engineering. The purpose of this research is to improve the efficiency of information gathering and its use in tasks of the ship design engineering support system. Due to their variety and complexity, the existing engineering methods tend to waste time in searching for the standardized method and knowledge or to cause errors on tasks. Generally, these kinds of system have serious problems. The most serious one among them is that the existing system consists of both useful and useless data. This finally leads engineers to a failure in finding out useful information from the system. We have designed a standardized framework, which enables users to properly recompose the menu form depending on the task process, simplifies the methods at several process levels, and provides a more intuitive method in user interface environment in order to resolve the existing problems, minimize the system-operating costs, and improve the efficiency of engineering tasks.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.6
• /
• pp.704-711
• /
• 2015

In this study, we have conducted a survey of AHP technique through the ocean experts to derive new items and revise assessment items and indices for risk of sunken ships based on the survey results. As a result of the survey, two new items such as accident cause and tidal current are derived. And it shows that existing items such as toxic liquid substance, remaining oil and explosive gas which were evaluated as one group are desirable to be evaluated respectively. Accordingly, we analyze the indices of the new eleven assessment items adjusted from the existing seven assessment items. As a result, the indices are ordered by toxic liquid substance, possibility of leaking, explosive gas, carrying capacity of fuel oil, sensitivity of sea environment, marine traffic environment, cause of accident, tidal current, keel clearance, ship type, and ship size. Especially, as compared with the indices of existing assessment items, the indices of sensitivity of sea environment and possibility of leaking are higher and the index of keel clearance is lower.

• Journal of Digital Contents Society
• /
• v.16 no.6
• /
• pp.871-882
• /
• 2015

AIS-ASM is one of the studies to provide a variety of maritime safety information as well as the information on a ship's position that is their own function, and AIS-ASM has been implemented with adjustment of the relevant regulations since 2004. However, it was reported that the increased use of ASM message on the existing AIS channel affects the part of the existing AIS own function such as the transmission of the ship's position and safe-related information. Also, seamless MSP service is difficult to provide at a low transmission rate of the existing AIS channel. This study aims to reduce the marine officer's workload through automating captain's mandatory reporting items using the one of the next maritime digital communication technology (ASM2.0). For this purpose, we designed and realized the ASM2.0 protocol through analyzing domestic regulations about passenger flight and AIS-ASM message.

• Journal of Fisheries and Marine Sciences Education
• /
• v.4 no.1
• /
• pp.1-15
• /
• 1992

Fishery and shipping industry are ones of the important industries for the Republic of Korea, and the education of competent technicians is a essential-important factor for the further development in these fields. To this end, curriculum for the fisheries and/or merchant marine high schools are rearranged to meet the industrial needs and social change. In this study, the existing goal of education is rearranged inclusively to meet the further development and the curriculum to realize the goal. The departments are reorganized into nine ones by establishing new two. They are Department of Refrigeration Mechanical Engineering and of Automated-ship Operation. Four departments of existing seven-Department of Fish Aquaculture, of Fish Processing, of Marine Engine and of Marine Communication-are renamed into Department of Aquaculture, of Food Processing, of Power Mechanical Engineering and of Electronic Communication respectively. The remaining three departments- Department of Fishing Technology, of Self-managing Fisheries and of Navigation-are unchanged. The specialized subjects are revised as follows; (1) The existing seven subjects especially prepared for the fisheries and/or merchant marine high schools are changed into the common subjects for all the vocational high schools. They are Food Science, Food Hygiene, Food Processing Machinery, Air-conditioning Facilities, Welding and Piping, Communication Law and Introduction to Computer. (2) Two subjects are newly established: Refrigeration Mechanical Engineering and Automated-ship Operation. (3) Four subjects are disused : Sea Training, Fisheries Law, Canned Food and Practice in Communication. (4) Introduction to ship, to Marine Engine and to Marine Communication are merged into Introduction to ship. (5) The compulsory major subject is fixed as Introduction to Fisheries for the fisheries high schools and Introduction to shipping Industry for the merchant marine high schools.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.5
• /
• pp.479-485
• /
• 2019

As exhaust gas systems of ships become more complicated, it is necessary to calculate an accurate pressure loss at their design stage. If the dynamic loss coefficients of non-standard fittings mainly used in exhaust gas pipe (EGP) are well-documented, it would be possible to calculate precise pressure loss more readily than using the conventional method that analyzes the entire system. In the case of a ship's EGP, the flow rates and temperatures of exhaust gas are determined by engine specifications, and the range of the flow rate and temperature is limited according to operating conditions. In addition, as it is possible to define non-standard fittings frequently used in an EGP, a database can be easily constructed and effective. This paper illustrates effective parameters and analysis cases of several types of non-standard fittings mounted in ship EGPs. The analysis procedure proposed in this paper is verified using existing research results on HVAC fittings. The numerical procedure, which is minimally affected by manpower and grid, is established such that it can be applied at the industry level.

• Journal of Ocean Engineering and Technology
• /
• v.36 no.1
• /
• pp.50-60
• /
• 2022

The deep ocean engineering basin (DOEB) of the Korea Research Institute of Ship and Ocean Engineering (KRISO) is equipped with an extreme-environment reproduction facility that can analyze the motion characteristics of offshore structures and ships. In recent years, there have been requirements for a wide range of six-degree-of-freedom (6-DOF) motion measurements for performing maneuvering tests and free-running tests of target objects (offshore structures or ships). This study introduces the process of developing a wide-area motion measurement technology by incorporating the auto-tracking technology of the towing carriage system to overcome the existing 6-DOF motion measurement limitation. To realize a wide range of motion measurements, the automatic tracking control system of the towing carriage in the DOEB was designed as a speed control method. To verify the control performance, the characteristics of the towing carriage according to the variation in control gain were analyzed. Finally, a wide range of motions was tested using a model test object (a remotely operated vehicle (ROV)), and the wide-area motion measurement technology was implemented using an automatic tracking control system for a towing carriage.