• 대한조선학회논문집
• /
• 제58권5호
• /
• pp.314-321
• /
• 2021

In the existing whole ship analysis, topside was modeled as mass element. However recently, the topside is modeled as beam element due to the owner's requirement to improve the maturity of the whole ship FE model. To follow the owner'srequirement, detailed information for topside drawing and modeling, which may delay analysis schedule, is needed. However, it is hard to respond effectively to this matter due to the lack of study on the topside from the hull perspective. Therefore in this study, the effect of the topside on the hull is investigated when the topside is modeled as a mass element or beam element respectively. In addition, the interface modeling method is analyzed to verify modeling method used in the existing whole ship analysis. The results indicate that the interface and topside modeling method used in existing whole ship analysis are appropriate. This conclusion will be the technical basis for responding to owner's requirement about the topside modeling method.

• 한국해양공학회지
• /
• 제34권1호
• /
• pp.1-12
• /
• 2020

Although there are many kinds of advanced ballast water management systems, pioneering studies for ballast-water free ship and minimal ballast water ship concepts are in progress. In this study, the existing alternatives of ballast water are reviewed and a new design concept is studied on the basis of the existing bulk carrier hull form. To develop a new design alternative which has minimal ballast for ballast water discharge free operation, the new concept should have technical feasibilities that are related to the role of the ballast water, berth access, loading constraints, etc. For this purpose, a simplified systems engineering basis design approach is adopted using a business model as the system analysis and control tool. To check the performance feasibility of the new concept, ship resistance performance is reviewed based on a model scale ship resistance performance analysis.

• 대한기계학회논문집
• /
• 제18권3호
• /
• pp.777-784
• /
• 1994

A design expert system for the ship structural design is developed to support inexperienced designers. To establish the knowledge-base, an expert system development shell, Nexpert, is used. Knowledge is extracted from the rules of a classification society of ships, and also from an existing ship structural program that is being used by ship designers. This knowledge is systematized using the objectoriented concept. The design support system is constructed by adding additional functions which are required for the conventional engineering design work. Added functions are; calculation of longitudinal strength, database of existing ship designs, graphical user interface, and visualization of design results. It is observed that visualizing the relationships among the rules, which are activated to draw a certain design decision, is helpful. The system can easily be updated according to changes of the rule books of ship classification societies.

• Journal of Advanced Marine Engineering and Technology
• /
• 제41권4호
• /
• pp.316-322
• /
• 2017

본 논문의 주 목적은 수치해석 도구를 활용하여 저항성능 관점에서 우수한 선형을 개발하는 것이다. 최종 개발된 선형의 성능 평가를 위해 수조 모형시험을 수행하였다. 현존선은 도면을 바탕으로 실물과 도면의 타당성 검토를 위해 실태조사를 수행하였다. 실태조사 시에 실제 운항 상태인 주 운항 배수량 및 주 운항 선속을 확인하였다. 수치해석을 바탕으로 현존선의 저항성능을 검토하였다. 개발선은 선수어깨의 파형개선, 배수량 분포의 균형화, 단면형상의 수정 그리고 중앙 스케그의 크기와 형상 변경에 관한 스터디를 통해 도출되었다. 수치해석 결과 개발선은 조파저항 개선에 의해 저항성능 관점에서 주 운항 선속인 11노트에서 약 15% 개선된 양을 보여주었다(Table 4 참조). 개발된 선형의 성능 평가를 위해서 수조 모형시험을 수행하였으며 그 결과 11노트에서 약 17% 개선된 양을 보여주었다(Table 5 참조).

• 한국항행학회논문지
• /
• 제20권6호
• /
• pp.519-527
• /
• 2016

본 논문에서는 해운선사의 운영비용 관리를 위해서 현존선의 항차 단위의 선박 경제운항 기술을 위한 개념 연구를 수행하였다. 해운산업 현황과 경제운항 기술개발 현황, 기술 요구사항 및 선박 운영에 필요한 비용 요소를 분석하여 경제운항 관리요소를 도출하였다. 개별 항차를 기준으로 현존선의 경제운항은 연료비와 항만에서 사용되는 비용을 최소화 하는 것이며, 이를 위해서 저속운항, 정속운항, 배수량 관리, 최적 트림, 최적 항로 선정, 터미널 생산성 관리, 선박 에너지 절감 활동을 관리한다. 최적항로, 터미널 생산성 관리는 절감된 시간으로, 저속운항, 정속운항, 최적트림, 선박 에너지 절감은 권고사항 만족 여부를 관리한다.

• 대한인간공학회지
• /
• 제31권2호
• /
• pp.353-362
• /
• 2012

Objective: The aim of this study is developing the navigation radar display of navy ship with ecological interface design (EID) framework. Background: Navy ship radar operator must perform navigation support tasks by monitoring the complex and diverse information presented on the radar display. Current radar display is limited in effective navigation aid and response to an unusual state immediately. It is necessary to develop an effective radar display. Method: Ten navy radar operators performed a series of trials in a low-fidelity radar simulation in which they attempted to solve the problems of current navigation situation. Results: The result demonstrated that the ecological interface's performance was better than the existing radar display on performance time and subjective mental workload. Conclusion: This study expand EID study field to navy ship radar display and confirm ecological display is better than existing radar display in performance time, subjective mental work load. Application: The result of this study may help to improve navy ship navigation radar display currently in use.

• 대한임베디드공학회논문지
• /
• 제15권2호
• /
• pp.71-78
• /
• 2020

This paper proposes vision sensors and deep learning-based around view monitoring system for ship berthing. Ship berthing to the port requires precise relative position and relative speed information between the mooring facility and the ship. For ships of Handysize or higher, the vesselships must be docked with the help of pilots and tugboats. In the case of ships handling dangerous cargo, tug boats push the ship and dock it in the port, using the distance and velocity information receiving from the berthing aid system (BAS). However, the existing BAS is very expensive and there is a limit on the size of the vessel that can be measured. Also, there is a limitation that it is difficult to measure distance and speed when there are obstacles near the port. This paper proposes a relative distance and speed estimation system that can be used as a ship berthing assist system. The proposed system is verified by comparing the performance with the existing laser-based distance and speed measurement system through the field tests at the actual port.

• 한국항해학회지
• /
• 제17권3호
• /
• pp.69-76
• /
• 1993

In harbour the practical shiphandlers should have a expert knowledge of systematically reducing head-way and keeping ship's positions to the final position with confidence and under control. But now in the practical approaches we do not have any special maneuvers of controlling the ship effi-ciently regarding the headway and approaches except some existing reduction of speeds according to the Weight-to-Power Ratio, use of astern power and Rudder Cycling. Consequently this study put Woo's Super Rudder Controlling originally developed by Captain Woo, Ph. D. to practical use as a special maneuvers in the port approaches. The conclusions of this paper are drawn as follows : 1) Optimum standard and desirable controls in combination of three engine speeds with three yaw ang-les were proposed for the practical shiphandlers, 2) According to simulation of the pilotships the Super advances are 10.5 ship lengths for Full full full maneuvers, and 7.9 ship lengths for Full half maneuvers approximately, 3) Approach maneuvers to anchorages by trying Woo's Super Rudder Controlling saved about 30% of total standby time in comparison with the existing Weight-to-Power Ratio maneuvers in the Pusan and Kwang Yang ports.

• 한국CDE학회논문집
• /
• 제21권1호
• /
• pp.1-8
• /
• 2016

After 2017 years, BWMS units must be installed in the existing ship as well as the new ship by the ballast water management convention. Software tools that can help automatically searching for BWMS installation space to avoid pipes and equipment in the engine room of the existing ship will be very useful in the BWMS layout design. In this study, voxel representation of scanned data is generated first to search space efficiently. Simplified voxel models of each unit are prepared to be located in the engine room space as well. Distance between connected models is calculated through the arrangement direction and position of each model. Sums of distance between connected models are compared for the optimal configuration. It is assumed that the sum of distance between connected models depicts the pipe usage. The proposed method can save the time needed for BWMS installation design and allows optimal configuration of BWMS units.

• 한국항해항만학회지
• /
• 제35권2호
• /
• pp.173-178
• /
• 2011

This study determined the ship replacement life expectancy from an economic perspective. There are many ambiguities in the cost for calculation of economic lifespan, and these were expressed as fuzzy numbers. Also, a fuzzy cost model using fuzzy numbers was developed and suggested as a more practical analysis method than the existing cost model. And the suggested fuzzy model was used to determine the economic lifespan for various types of container ships. As the result, Without fuzziness, the economic lifespan of 5000 TEU Ships was found to be 19 years. it was found that the greater the container ship, the greater the economic lifespan was.