• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.11a
• /
• pp.175-176
• /
• 2014

Recently, in the apartment house of our country, office building, apartment, and etc, the lightweight composite panel is much used as the partition wall body. This is due to be very convenient when the execution and dismantling is convenient and it forms the space which the consumer in the space desires. Therefore, in this research, the thermal conductivity property of the lightweight composite panel core according to the replacement ratio variation of the pearlite tries to be analyze. As the density test result and replacement ratio of the pearlite increased, the density showed the tendency to rise. the replacement ratio of the pearlite increased, the absorption rate showed the tendency to fall. And this is determined that absorption rate is degraded due to the increase in the density. the thermal conductivity test result and pearlite replacement ratio increased, the tendency that the thermal conductivity increases was represented.

• Journal of Biosystems Engineering
• /
• v.23 no.2
• /
• pp.115-124
• /
• 1998

Over- and under-application of pesticides to crops have recently become main concerns regarding the environment conservation, product cost and firmer's safety. Thus, a uniform and optimal application method of pesticides was needed. The objective of study was to evaluate flow compensating characteristics of a variable flow control system for a boom sprayer using a laboratory setup. At the most variable conditions, the control system was acceptable with the flowrate control strategy. However, the sprayer control system became unstably fluctuating at the long execution time with small tolerance because of the constant valve on-time. This problem was solved by employing a variable on-time control. The optimal values for the damping ratio and the execution time were 2 and 1.0 sec, respectively, with the tolerances less than 3%. The performance of the control system at the optimal conditions were the response time of 3.8sec and the absolute steady-state error of 0.5% with the stable RCV and ROS ( < 1.0).

• Journal of Arbitration Studies
• /
• v.19 no.1
• /
• pp.45-65
• /
• 2009

China and Taiwan had opened complete Three Linkages era December 2008, in the 59 years. The improvement of two countries' relationship is expecting to spur two countries more on the economy exchange. However the increasement of investment and trade between two countries will increase disputes to ratio. In order to settle the disputes related to economy between two countries, the most favorite way is to use arbitral system which involve less public power. After China and Taiwan recognized this point, they announced provisions which allow to solve controversies through the arbitration between parties of two countries since 1980, and prepared legal basis for dispute settlement between two countries. However, because China and Taiwan do not authorize each party as a country, the execution application made by each party based on New York Convention related to foreign arbitral awards cannot be approved. Because of these kind of reasons China and Taiwan should agree in order to guarantee mutual execution of arbitral awards which is an ultimate purpose of arbitration. However because of the political situation of two countries there are provisions related to execution for arbitral awards decided by each party. In this paper, I separated the provision related to mutual execution for arbitral awards of each party of China and Taiwan, examined exposed problems, and suggested ways to improve. It can support some of assistance and implication to establish basis of arbitral system between South Korea and North Korea and to suggest direction to derive through this kind of study.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.6
• /
• pp.55-64
• /
• 2017

High-capacity, high-definition image applications need to process considerable amounts of data at high speed. Accordingly, users of these applications demand a high-speed parallel execution system. To increase the speed of a parallel execution system, Park (2004) proposed a technique, called MAMS (Multi-Access Memory System), to access data in several execution units without the conflict of parallel processing memories. Since then, many studies on MAMS have been conducted, furthering the technique to MAMS-PP16 and MAMS-PP64, among others. As a memory architecture for parallel processing, MAMS must be constructed in one chip; therefore, a method to achieve the identical functionality as the existing MAMS while minimizing the architecture needs to be studied. This study proposes a method of miniaturizing the MAMS architecture in which the architectures of the ACR (Address Calculation and Routing) circuit and MMS (Memory Module Selection) circuit, which deliver data in memories to parallel execution units (PEs), do not use the MMS circuit, but are constructed as one shift and conditional statements whose number is the same as that of memory modules inside the ACR circuit. To verify the performance of the realized architecture, the study conducted the processing time of the proposed MAMS-PP64 through an image correlation test, the results of which demonstrated that the ratio of the image correlation from the proposed architecture was improved by 1.05 on average.

• Steel and Composite Structures
• /
• v.7 no.2
• /
• pp.135-160
• /
• 2007

Recently, CFT column has been well-studied and reported on, because a CFT column has certain superior structural properties as well as good productivity, execution efficiency, and improved rigidity over existing columns. However, CFT column still has problems clearing the capacity evaluation between its steel tube member and high-strength concrete materials. Also, research on concrete has examined numerical values for high-strength concrete filled steel square tube columns (HCFT) to explain transformation performance (M-${\phi}$) when a short-column receives equal flexure-moment from axial stress. Moment-curvature formulas are proposed for HCFT columns based on analytic assumption described in this paper. This study investigated structural properties (capacity, curvature), through a series of experiments for HCFT with key parameters, such as strength of concrete mixed design (58.8 MPa), width-thickness ratio (D/t), buckling length to sectional width ratio (Lk/D) and concrete types (Zeolite, Fly-ash, Silica-fume) under eccentric loads. A comparative analysis executed for the AISC-LRFD, AIJ and Takanori Sato, etc. Design formulas to estimate the axial load (N)-moment (M)-curvature (${\phi}$) are proposed for HCFT columns based on tests results described in this paper.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.9
• /
• pp.1825-1838
• /
• 2012

This paper proposes a fast face detection and tracking method which uses depth images as well as RGB images. It consists of the face detection procedure and the face tracking procedure. The face detection method basically uses an existing method, Adaboost, but it reduces the size of the search area by using the depth information and skin color. The proposed face tracking method uses a template matching technique and incorporates an early-termination scheme to reduce the execution time further. The results from implementing and experimenting the proposed methods showed that the proposed face detection method takes only about 39% of the execution time of the existing method. The proposed tracking method takes only 2.48ms per frame. For the exactness, the proposed detection method and previous method showed a same detection ratio but in the error ratio, which is about 0.66%, the proposed method showed considerably improved performance. In all the cases except a special one, the tracking error ratio is as low as about 1%. Therefore, we expect the proposed face detection and tracking methods can be used individually or in combined for many applications that need fast execution and exact detection or tracking.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.46 no.3
• /
• pp.77-85
• /
• 2009

Execution times of tasks can be variable depend on input data. If we choose a high performance processor to satisfy the worst case execution times, the hard cost becomes high and the energy consumption also becomes large. To apply a lower performance processor, we have to utilize processor capacity maximally while overrunning tasks can not affect deadlines of other tasks. To be used for such systems, this paper presents SBP (Shared Bandwidth Partitioning) that a processor bandwidth is reserved and shared among all tasks. If a task needs more processor capacity, it can use a portion of the shared bandwidth. A simulation result shows that SBP provides better performance than previous algorithms. SBP reduces deadline miss ratio which is related to scheduling quality. And the number of context switches, which is related to system overhead, is also reduced.

• The KIPS Transactions:PartA
• /
• v.14A no.3 s.107
• /
• pp.167-172
• /
• 2007

VM(Virtual Machine) can be considered as a software processor which interprets the machine code. Also, it is considered as a conceptional computer that consists of logical system configuration. But, the execution speed of VM system is much slower than that of a real processor system. So, it is very important to optimize the code for virtual machine to enhance the execution time. Especially the optimizer for a virtual machine code on embedded devices requires the highly efficient performance to the ordinary optimizer in the respect to the optimized ratio about cost. Fundamentally, functions and basic blocks which influence the execution time of virtual machine is found, and then an optimization for them nay get the high efficiency. In this paper, we designed and implemented the optimizer for the virtual(or abstract) machine code(VMC) using profiling. Firstly, we defined the profiling information which is necessary to the optimization of VMC. The information can be obtained from dynamically executing the machine code. And we implemented VMC optimizer using the profiling information. In our implementation, the VMC is SIL(Standard Intermediate Language) that is an intermediate code of EVM(Embedded Virtual Machine). Also, we tried a benchmark test for the VMC optimizer and obtained reasonable results.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.7
• /
• pp.1252-1273
• /
• 2011

In Web Service Composition (WSC) area, services selection aims at selecting an appropriate candidate from a set of functionally-equivalent services to execute the function of each task in an abstract WSC according to their different QoS values. In despite of many related works, few of previous studies consider transactional constraints in QoS-aware WSC, which guarantee reliable execution of Composite Web Service (CWS) that is composed by a number of unpredictable web services. In this paper, we propose a novel global selection-optimal approach in WSC by considering both transactional constraints and end-to-end QoS constraints. With this approach, we firstly identify building rules and the reduction method to build layer-based Directed Acyclic Graph (DAG) model which can model transactional relationships among candidate services. As such, the problem of solving global optimal QoS utility with transactional constraints in WSC can be regarded as a problem of solving single-source shortest path in DAG. After that, we present Graph-building algorithms and an optimal selection algorithm to explain the specific execution procedures. Finally, comprehensive experiments are conducted based on a real-world web service QoS dataset. The experimental results show that our approach has better performance over other competing selection approaches on success ratio and efficiency.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.12
• /
• pp.2401-2409
• /
• 2016

Android CPU governors exploit the DVFS (Dynamic Voltage Frequency Scaling) technique. The DVFS is a power management technique where the CPU operating frequency is decreased to allow a corresponding reduction in the CPU supply voltage. The power consumed by a CPU is approximately proportional to the square of the CPU supply voltage. Therefore, lower CPU operating frequency allows the CPU supply voltage to be lowered. This helps to reduce the CPU power consumption. However, lower CPU operating frequency increases a task's execution time. Such an increase in the task's execution time makes the task's response time longer and makes the task's deadline miss occur. This finally leads to degrading the quality of service provided by the task. In this paper, we evaluated the performance of Android CPU governors in terms of the power consumption, tasks's response time and deadline miss ratio.