• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.30-32
• /
• 1995

The SRM has high efficiency, a wide speed range, high speed capability and DC-series Motor characteristics. So the SRM has been studied as adjustable speed machine. The speed of SRM can be adjusted to switching angle and exciting voltage. This paper suggests an constant speed drive method of SRM. In this method, the speed is controlled by voltage regulation using PI control and the torque is controlled by advance angle in accordance with, load torque variation.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권1호
• /
• pp.1-7
• /
• 2004

This paper presents a sensorless control strategy of a PMSM(Permanent Magnet Sycchoronous Motor). This method is very simple to compute the position angle of a rotor. A principle and a practical solution are described. A sensorless control algorithm is proposed to remove a mechanical position sensor. The theory is based on the superposition principle. The state equation of a motor is divided into two conditions: one is the state equation of exciting voltage and phase current in a constraint, the other is the state equation of back EMF(Electromotive Force) and phase current in a short circuit. Based on the analysis, short circuit current by back EMF is computed and then the information of position angle is calculated. The proposed method is verified by experimental results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 F
• /
• pp.2024-2026
• /
• 1998

Many power plants built 20-30 years ago are facing problems associated with the excitation system used for controlling generator output voltage. After years of reliable operation, generation is experiencing increased down time due to maintenance associated with the exciting excitation equipment. Reliability of the excitation system has become an issue, especially where many of these generation plants may be critical to the internal processes used for manufacturing. Wear out mechanisms such as those associated with the wire wound rheostat the electromechanical voltage regulator, insulation failures of the rotating exciter and commutator deterioration have become real problems typical of many older installations. These are some of the issues that are affecting system reliability for older power plants. This paper will address typical problems associated with the old excitation systems and the justification for a replacement static excitation system used in many Paper Mills.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1996년도 제11회 수중음향학 학술발표회 논문집 11th Underwater Acoustics Symposium Proceedings
• /
• pp.9-12
• /
• 1996

This paper introduces an analysis of the non-axisymmetric mode due to in-plane vibration of an annular type piezoelectric actuator using FEM(Finite Element Method). The actuator is used as stator of ultrasonec motor. The freqrency charecterisrics and non-axisymmetric mode of the annular piezoelectric acruator are considered at a steady-state condition. The non-axisymmetric mode is occured by two sinusodial voltage sources with $\pi$/2 phase difference on the time domain. The resonant frequency of non-axisymmetric of non-axisymmetric mode is 60.358 kHz and 59.880 kHz for calculation and measurement, respectivly. The error was 0.8% between calculation and measurement. The revolution of the non-axisymmetric mode for actuator is analized at a period of exciting voltage sources using annimation. It is confirmed that the actuator has an usefulness as the stator of ultrasonic motor and the preposed method has a properity.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.729-731
• /
• 2000

This paper presents a simple method for determining the minimum value of capacitance required for initiating self excitation in three-phase self-excited induction generator. Based on the steady-state equivalent circuit model, this paper presents simple and direct method to find the minimum capacitance requirement under R-L load. Using the loop impedance and nodal admittance. the minimum capacitance is determined by self excitation condition. These computed values can be used to predict practically the minimum value of the terminal voltage required for self-excitation. To maintain a constant terminal voltage, a method for determining the frequency, terminal capacitance, and exciting reactance is also described.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.226-227
• /
• 2007

Nanostructured materials are attracting increased interest and application. Exciting perspectives may be offered by electrical insulation. Epoxy/Organoclay nanocomposites may find new and upgraded applications in the electrical industry, replacing conventional insulation to provide improved performances in electric power apparatus, e.g, high voltage motor/generator stator winding insulation, dry mold transformer, etc. This paper shows that electrical and thermal properties of epoxy/organoclay nanocomposites insulating materials for dsc, dielectric constant, I-V characteristics, breakdown volatge, can improve significantly with respect to the basic, virgin materials.

• Journal of Magnetics
• /
• 제17권3호
• /
• pp.206-209
• /
• 2012

Peak interval for reversible permeability is presented for nondestructively evaluating the remanent life of 1Cr-0.5Mo steel. The method to measure the peak interval of reversible permeability is based on the value of reversible permeability is the same as the differential value of the hysteresis loop. The measurement principle is based on the first harmonics voltage induced in a sensing coil using a lock-in amplifier tuned to a frequency of the exciting voltage. Results obtained for the peak interval of reversible permeability and Rockwell hardness on the aged samples decrease as aging time and the Larson-Miller parameter increase. We could estimate the remanent life of 1Cr-0.5Mo steel by using the relationship between the peak interval of reversible permeability and the Larson-Miller parameter, nondestructively.

• 한국세라믹학회지
• /
• 제38권12호
• /
• pp.1115-1122
• /
• 2001

여기에너지에 따라서 $Y_2$O$_3$:Eu 형광체의 활성제의 농도 변화 및 적색안료인 $\alpha$-Fe$_2$O$_3$ 미립자를 형광체 표면에 코팅함에 있어 표면처리 방법 변화에 따른 발광 특성의 변화를 연구하였다. 형광체 표면처리방법은 FeSO$_4$를 이용하여 에멀젼 드라이 방식으로 $\alpha$-Fe$_2$O$_3$미립자를 만들어 형광체 표면에 흡착법과 FeSO$_4$/에탄올을 이용하여 액상에서 생성된 침전물을 형광체 표면에 침전시킨 침전법을 사용하였다. 고상법으로 합성된 $Y_2$O$_3$:Eu 형광체의 경우 여기에너지에 따라서 최고 휘도를 나타내는 활성제의 첨가량이 다르게 나타났으며, 활성제의 함량이 진공자외선(147nm)과 저 전압 영역(400V)에서는 0.02mol이고 5kV에서는 0.03mol이었다. 색순도 향상을 위한 안료가 표면 처리되면 형광체의 발광 휘도가 감소한다. 표면처리는 여기에너지에 따라서 다른 방법을 사용해야한다. 진공자외선과 저 전압 영역에서는 불균일 한 막을 형성하는 흡착법으로 표면처리를 해야하고, 고전압영역에서는 침전법으로 표면 처리하는 것이 유리하다.

• 비파괴검사학회지
• /
• 제24권5호
• /
• pp.532-537
• /
• 2004

전자기장을 유도하는 원리를 기초로 한 새로운 비파괴탐상법인 FEF법을 개발하였다. 이 탐상법은 전자기장을 유도하는 유도선과 이를 감지하는 감지부로 구성되어 있고, 비접촉 방식으로 탐상을 실시한다. 본 연구는 알루미늄합금, 스테인레스강과 인코넬 합금강의 재료에 방전 가공한 결함에 대하여 결함 검출 및 결함 깊이에 대한 평가를 실시하였다. 결함이 없는 영역에서의 측정전압은 lift-off에 의존한다. 결함영역에서 탐촉자가 결함에 가까이 접근할수록 전압은 증가하고, 결함위치에서 최고전압으로 측정되며, 이 최고치는 결함의 깊이에 따라 변화한다. 각 재료에 대한 전압분포 같은 경향으로 측정된다.

• Journal of Electrical Engineering and Technology
• /
• 제13권4호
• /
• pp.1474-1482
• /
• 2018

As an essential means of generator voltage regulation, excitation control plays an important role in controlling the stability of the power system. Therefore, the reasonable design of an excitation controller can help improve the system stability. In order to raise the robustness of the generator exciting system under outside interference and parametric perturbation and eliminate chattering in the sliding mode control, this paper presents a generator excitation control based on the quasi-sliding mode pseudo-variable structure control. A mathematical model of the synchronous generator is established by selecting its power, speed and voltage deviation as state variables. Then, according to the existing conditions of the quasi-sliding mode, a quasi-sliding mode pseudo-variable structure controller is designed, and the parameters of the controller are obtained with the method of pole configuration. Simulations show that compared with the existing methods, the proposed method is not only useful for accurate voltage regulation, but also beneficial to improving the robustness of the system at a time when perturbance happens in the system.