• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.620-628
• /
• 2005

Spatial control of sound is essential to deliver better sound to the listener's position in space. As it can be experienced in many listening environments, the quality of sound can not be manifested over every position in a hall. This motivates us to control sound in a region we select. The primary focus of the developed method has to do with the brightness and contrast of acoustic image in space. In particular, the acoustic brightness control seeks a way to increase loudness of sound over a chosen area, and the contrast control aims to enhance loudness difference between two neighboring regions. This enables us to make two different kinds of zone - the zone of quiet and the zone of loud sound - at the same time. The other perspective of this study is on the direction of sound. It is shown that we can control the direction of perceived sound source by focusing acoustic energy in wavenumber domain. To begin with, the proposed approaches are formulated for pure-tone case. Then the control methods are extended to a more general case, where the excitation signal has broadband spectrum. In order to control the broadband signal in time domain, an inverse filter design problem is defined and solved in frequency domain. Numerical and experimental results obtained in various conditions certainly validate that the acoustic brightness, acoustic contrast, direction of wave front can be manipulated for some finite region in space and time.

• 한국기계기술학회지
• /
• 제13권4호
• /
• pp.77-84
• /
• 2011

Tire manufactures have dealt with noise problem by varying the pitch of the tread. The various formulas for the variations are generally determined differently, however. Often these variations are based on a combination of trial and error, intuition, and economics. Some manufactures have models and analogs to test tread patterns and their variations. These efforts, however practical, do not determine the best variation beforehand or guarantee the best results. For this reason it was felt that a general mathematical approach for determining the best variation was needed. Moreover, the method should be completely general, easy to use, and sufficiently accurate. This paper discusses a mathematical method called Mechanical Frequency Modulation(MFM) which meets the above requirements. Thus, MFM pertains to computing an irregular time sequence of events so that the resulting excitation spectrum is shaped to a preferred form. The first part of this paper treats the theoretical basis for computing an optimum variation ; the second part discusses experimental results and simulation program which corroborate the theory.

• Earthquakes and Structures
• /
• 제13권2호
• /
• pp.193-200
• /
• 2017

To overcome the difficulty of performing multi-point response spectrum analysis for engineering structures under spatially varying ground motions (SVGM) using the general finite element code such as ANSYS, an approach has been developed by improving the modelling of the input ground motions in the spectral analysis. Based on the stochastic vibration analyses, the cross-power spectral density (c-PSD) matrix is adopted to model the stationary SVGM. The design response spectra are converted into the corresponding PSD model with appropriate coherency functions and apparent wave velocities. Then elements of c-PSD matrix are summarized in the row and the PSD matrix is transformed into the response spectra for a general spectral analysis. A long-span high-pier bridge under multiple support excitations is analyzed using the proposed approach considering the incoherence, wave-passage and site-response effects. The proposed approach is deemed to be an efficient numerical method that can be used for seismic analysis of large engineering structures under SVGM.

• 한국공간구조학회논문집
• /
• 제18권4호
• /
• pp.97-104
• /
• 2018

A connected control method for the adjacent buildings has been studied to reduce dynamic responses. In these studies, seismic loads were generally used as an excitation. Recently, multi-hazards loads including earthquake and strong wind loads are employed to investigate control performance of various control systems. Accordingly, strong wind load as well as earthquake load was adopted to evaluate control performance of adaptive smart coupling control system against multi-hazard. To this end, an artificial seismic load in the region of strong seismicity and an artificial wind load in the region of strong winds were generated for control performance evaluation of the coupling control system. Artificial seismic and wind excitations were made by SIMQKE and Kaimal spectrum based on ASCE 7-10. As example buildings, two 20-story and 12-story adjacent buildings were used. An MR (magnetorheological) damper was used as an adaptive smart control device to connect adjacent two buildings. In oder to present nonlinear dynamic behavior of MR damper, Bouc-Wen model was employed in this study. After parametric studies on MR damper capacity, optimal command voltages for MR damper on each seismic and wind loads were investigated. Based on numerical analyses, it was shown that the adaptive smart coupling control system proposed in this study can provide very good control performance for Multi-hazards.

• 천문학회보
• /
• 제44권2호
• /
• pp.40.3-40.3
• /
• 2019

Our recent observations of the Sun through strong spectral lines have revealed several important properties of the three-minute umbral oscillations inside sunspots -- the oscillations of intensity and Doppler velocity with periods of 2 to 3 minutes. The oscillations usually occur in the form of a time series of oscillation packets each of which lasts 10 to 20 minutes, not as continuous trains. Each oscillation packet is characterized by a singly peaked power spectrum of velocity oscillation. The oscillations propagate in the vertical direction from the photosphere to the corona. In the upper chromosphere, they develop into shocks that eventually collide with the transition region. When shocks propagate along a highly inclined direction, the merging of two successive shocks can take place. Once they enter the corona, they change to linear compressional waves. In the image plane, the three-minute oscillations propagate with high speeds in the transverse direction as well, usually propagating radially outwards from a point, and sometimes accompanying spiraling patterns of Doppler velocity. These observational properties can be theoretically explained by postulating the spatio-temporally localized source of fast MHD waves at a depth of about 2000 km below the surface, the excitation of slow MHD waves via mode conversion near the photosphere, and the resonance of the slow waves in the photospheric layer below the temperature minimum, and the nonlinear development of slow waves in the chromosphere.

• 한국안광학회지
• /
• 제11권3호
• /
• pp.165-172
• /
• 2006

Cr, Cu, Fe 등을 고의적으로 첨가한 MgO 단결정에 자외선 및 X선을 조사하여 여기하고 액체질소온도로부터 500K까지의 범위에서 열자극 발광 그로우곡선과 발광 스펙트럼을 측정 분석하였다. 이 시료에서 얻어진 TSL 그로우곡선은 136.5K, 223.5K, 360K, 390K, 440K, 5개의 봉우리가 얻어졌다. 그들 봉우리의 활성화 에너지 값은 각각 0.27eV와 0.63eV, 1.08eV, 1.19eV, 1.33eV이었다. 우리는 200nm에서 650nm의 파장 범위 내에서 MgO 단결정의 TSL 스펙트럼을 측정하였다. 이 TSL 스펙트럼 측정으로부터 얻어진 345nm, 375nm, 410nm 파장에서 봉우리를 가진 스펙트럼을 분석하였으며, 이들의 발광 기구를 기술하였다. MgO:Cr, MgO:Cu, and MgO:Fe에서 방출된 TSL 스펙트럼의 봉우리는 346nm, 360nm, 375nm의 파장에서 나타났다.

• 한국지진공학회논문집
• /
• 제11권5호
• /
• pp.33-47
• /
• 2007

실무에서 지진해석법으로 널리 쓰이는 방법은 등가정적해석법과 응답스펙트럼해석법이다. 이 중 등가정적해석법에 의한 밑면전단력은 구조물의 주축을 해석좌표축에 어떻게 배치하는가와 상관없이 일관된 값을 나타낸다. 그러나 응답스펙트럼해석은 해석좌표 축에 구조물의 주축을 다르게 배치하여 해석을 수행하면 밑면전단력이 각기 다르게 발생한다. 이는 엔지니어가 구조물을 설계함에 있어 구조물의 주축을 해석좌표축에 어떻게 설정했는지에 따라 설계부재력이 모두 달라질 수 있음을 뜻한다. 또한 응답스펙트럼해석은 지진을 가한 방향의 직각방향에서 적지 않은 응답이 발생하는 경우가 생긴다. 한방향 해석에 대한 X와 Y축을 따라 분리되는 이러한 양방향 응답은 보정계수 산정시 쓰이는 밑면전단력을 작게 만들며 이는 결과적으로 보정계수를 크게하여 과다설계의 우려가 생긴다. 내진설계시 발생하는 이러한 문제점을 해결하기 위하여 본 논문에서는 수평의 강성 차이에 따라 구조물을 크게 세 가지(양방향 대칭 구조물, 한방향 비대칭구조물, 양방향 비대칭구조물)로 분류하여 각각의 경우에 대하여 간단한 모델을 선정하고 구조물의 주축을 회전시켜가면서 지진해석을 수행하였다. 각 경우의 예제구조물이 가지는 동적특성과 설계부재력을 살펴보았다. 현재 실무에서 적용되는 보정계수 산정법에 의한 설계부재력과 앞선 문제들을 해결하고자 본 논문에서 제안하는 새로운 보정계수 산정법에 의한 설계부재력을 비교하여 제안하는 보정계수 산정법의 효율성을 검토하였다. 그 결과로 새로 제안된 보정계수 산정법에 의하여 설계부재력을 산정하는 것이 내진설계시 엔지니어들이 겪을 수 있는 혼란을 덜어주며 경제적인 부재설계가 가능함을 알 수 있었다.

• 한국재료학회지
• /
• 제10권1호
• /
• pp.49-54
• /
• 2000

PDP용의 새로운 녹색 $Al_3GdB_4O_{12}:Tb^{3+} 형광체와 Al_3GdB_4O_{12}:Eu_{3+}$ 적색형광체를 제조한 후 광특성을 분석하였다. 또한 이들 형광체의 발광특성을 상용품인 $Zn_2SiO_4:Mn^{2+}$ 녹색 형광체와 $(Y,Gd)BO_3: Eu^{3+}$ 적색의 PDP 형광체와 상호 비교하였다. 형광체는 $1150^{\circ}C$에서 4시간 동안 공상 반응으로 제조하였다. 147nm의 진공자외선 조사시 $Al_3GdB_4O_{12}:Tb^{3+}$(15mol%) 녹색 형광체의 발광휘도는 상용품 $Zn_2SiO_4: Mn^{2+}$ 보다 증가하였으나 색좌표는 상대적으로 저하되었다. 한편 $Al_3GdB_4O_{12}:Eu^{3+}$(15mol%) 적색 형광체의 발광 휘도는 상용품$(Y,Gd)BO_3: Eu^{3+}$ 보다 작았으나 CIE 색좌표는 일부 개선되었다. $Al_3GdB_4O_{12}$ 형광체는 $\lambda=160nm$에서 모체 흡수에 의한 강한 여기밴드가 있으며, 진공자외선 영역에서 $Al_3GdB_4O_{12}:Tb^{3+}$ 녹색형광체의 여기강도는 $Zn_2SiO_4: Mn^{2+}$ 보다 컸으나 $Al_3GdB_4O_{12}:Eu^{3+}$ 적색 형광체의 여기강도는 $(Y,Gd)BO_3: Eu^{3+}$ 보다는 작았다.

• 대한환경공학회지
• /
• 제28권9호
• /
• pp.940-948
• /
• 2006

형광측정법은 자연유기물질을 간편하고 신속하게 분석함으로써 타 분석법에 비해 현장에서 실시간으로 수질관리에 활용할 수 있는 월등한 장점을 가지고 있다. 본 연구에서는 표준자연유기물질, 호소수 및 하천수 등 다양한 시료의 형광지표($F_{450}/F_{500}$), synchronous 스펙트럼, 형광 EEM(excitation-emission matrix)을 조사하고 시료 간 상호비교를 통해 자체생성/외부생성 유기물, 단백질계, 펄빅산계, 휴믹산계, 육질성 휴믹산계 형광특성 영역을 구분하였다. 또한 각 영역간의 형광세기 비를 이용하여 다양한 유기물 성분의 상대적인 분포를 파악하였다. 각 시료에서 얻어진 형광특성 및 형광세기 비는 시료의 수질 특징에서 예상되는 결과와 잘 일치하였다. 자연유기물의 생성지가 육지성일수록 외부생성 유기물 및 육질성 휴믹산계 형광특징이 더 크게 나타났고 하수 처리수의 영향을 받거나 조류 및 미생물 활동이 활발한 지점에서는 단백질계 형광특성이 뚜렷하게 나타났다. 특히, synchronous 형광스펙트럼이나 형광 EEM에서 얻어지는 단백질계/육질성 휴믹산계 형광세기 비는 도심지 하천의 경우 하수종말처리장 방류수 영향을 평가하는 지표로, 또한 호수의 경우 조류 및 미생물 활동 정도를 예측하는 지시자로서 사용될 수 있음을 보여 주었다. 본 연구는 현장시료를 사용한 자연유기물질 형광분석법 및 그 해석에 대한 기초자료를 제시하였으며 이 연구결과는 향후 유기물 성분분포 파악이 필요한 수질관리 분야에서 유용하게 사용될 수 있을 것으로 기대한다.

• 한국재료학회지
• /
• 제21권5호
• /
• pp.250-254
• /
• 2011

We have synthesized bluish-green, highly-efficient $BaSi_2O_2N_2:Eu^{2+}$ and $(Ba,Sr)Si_2O_2N_2:Eu^{2+}$ phosphors through a conventional solid state reaction method using metal carbonate, $Si_3N_4$, and $Eu_2O_3$ as raw materials. The X-ray diffraction (XRD) pattern of these phosphors revealed that a $BaSi_2O_2N_2$ single phase was obtained. The excitation and emission spectra showed typical broadband excitation and emission resulting from the 5d to 4f transition of $Eu^{2+}$. These phosphors absorb blue light at around 450 nm and emit bluish-green luminescence, with a peak wavelength at around 495 nm. From the results of an experiment involving Eu concentration quenching, the relative PL intensity was reduced dramatically for Eu = 0.033. A small substitution of Sr in place of Ba increased the relative emission intensity of the phosphor. We prepared several white LEDs through a combination of $BaSi_2O_2N_2:Eu^{2+}$, YAG:$Ce^{3+}$, and silicone resin with a blue InGaN-based LED. In the case of only the YAG:$Ce^{3+}$-converted LED, the color rendering index was 73.4 and the efficiency was 127 lm/W. In contrast, in the YAG:$Ce^{3+}$ and $BaSi_2O_2N_2:Eu^{2+}$-converted LED, two distinct emission bands from InGaN (450 nm) and the two phosphors (475-750 nm) are observed, and combine to give a spectrum that appears white to the naked eye. The range of the color rendering index and the efficiency were 79.7-81.2 and 117-128 lm/W, respectively. The increased values of the color rendering index indicate that the two phosphor-converted LEDs have improved bluish-green emission compared to the YAG:Ce-converted LED. As such, the $BaSi_2O_2N_2:Eu^{2+}$ phosphor is applicable to white high-rendered LEDs for solid state lighting.