• International Journal of Precision Engineering and Manufacturing
• /
• 제7권2호
• /
• pp.56-59
• /
• 2006

A vibrational model of powder transfer equipment based on the lumped parameter method was developed, in which the operating motion consists of surging, bouncing, and pitching. After decoupling the equation of motion, the vibrational excitation source of the pitching motion was removed. So the designers are able to plan the optimum design to adjust the motion trajectory of the powder transfer equipment. That is, a procedure to adjust the motion trajectory of powder transfer equipment by changing design specifications such as the installation position, the direction of the motor, the driving speed, the mass unbalance, the stiffness coefficient, and the installation position of the support spring, is presented in this paper. The powder transfer equipment manufactured according to the results of this study did not suffer fatigue destruction, since the maximum stress on the basket structure was sufficiently small.

• International Journal of Precision Engineering and Manufacturing
• /
• 제7권2호
• /
• pp.60-65
• /
• 2006

A vibrational model of powder transfer equipment based on the lumped parameter method was developed, in which the operating motion consists of surging, bouncing, and pitching. After decoupling the equation of motion, the vibrational excitation source of the pitching motion was removed. So the designers are able to plan the optimum design to adjust the motion trajectory of the powder transfer equipment. That is, a procedure to adjust the motion trajectory of powder transfer equipment by changing design specifications such as the installation position, the direction of the motor, the driving speed, the mass unbalance, the stiffness coefficient, and the installation position of the support spring, is presented in this paper. The powder transfer equipment manufactured according to the results of this study did not suffer fatigue destruction, since the maximum stress on the basket structure was sufficiently small.

• 전기학회논문지P
• /
• 제67권3호
• /
• pp.155-159
• /
• 2018

Recently, the expansion or establishment of facilities for the logistics system is increasing. Conveyor facilities play a major role in sorting and transporting logistics. Induction motors are widely used for the operation of these conveyor systems. In the logistics system, a large number of induction motors are used. These motors have a considerable distance from the power source side and have a low power factor. The installation position for the power factor compensation of the induction motor is very important. Since the voltage drop depends on the length of the line, it is an important parameter in capacitor capacity determination for power factor compensation. The capacity of the capacitors installed to compensate the power factor of the inductive load should be designed to the extent that self-excitation does not occur. In this study, we analyze the method of compensating the proper power factor considering the voltage drop and the installation position of the induction motor in the logistics system.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.973-978
• /
• 2008

This study concerned on the critical speed due to hunting and snake motion train to ensure the stability. First, the critical speed was calculated by using a numerical model, and calculated the critical speed of the vehicle through the simulation with the use of ADAMS/RAII. Also, the snake motion was confirmed through a modal analysis and running simulation. The calculated results, show that the rail irregularity becomes the influential factors of the stability since it is the direct source of excitation of the vehicle.

• 한국정보처리학회논문지
• /
• 제7권4호
• /
• pp.1299-1304
• /
• 2000

In a speed coding system using excitation source of voiced and unvoiced, it would be involved a distortion of speech quality in case coexist with a voiced and an unvoiced consonants in a frame. So, I propose TSIUVC(Transition Segment Including UnVoiced Consonant) searching, extraction ad approximation-synthesis method in order to uncoexistent with a voiced and unvoiced consonants in a frame. This method based on a zerocrossing rate and pitch detector using FIR-STREAK Digital Filter. As a result, the extraction rates of TSIUVC are 84.8% (plosive), 94.9%(fricative), 92.3%(affricative) in female voice, and 88%(plosive), 94.9%(fricative), 92.3%(affricative) in male voice respectively, Also, I obain a high quality approximation-synthesis waveforms within TSIUVC by using frequency information of 0.547kHz below and 2.813kHz above. This method has the capability of being applied to speech coding of low bit rate, speech analysis and speech synthesis.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.1015-1019
• /
• 2002

The deposition of $SrGa_2S_4$ thin film phosphors doped with Ce or Eu aiming at application for FEDs has been carried out by a multi-source deposition technique. A $SrGa_2S_4$ phase was formed by annealing process and $SrGa_2S_4$ thin films which were deposited using a $Ga_2S_3/Sr$ flux ratio larger than 50 and annealed in $H_2$S showed luminance and luminous efficiency of about 1700 cd/$m^2$ and 2.95 lm/W, respectively, with (0.13, 0.10) chromaticity in the activation with Ce, and about 4000 cd/$m^2$ and 7.05 lm/W, respectively, with (0.36, 0.60) under excitation with 3 kV and 60A/$cm^2$. The results obtained this experiment demonstrate the potential of $SrGa_2S_4$ thin film phosphors for FED screens.

• 한국전기전자재료학회논문지
• /
• 제14권3호
• /
• pp.246-250
• /
• 2001

ZnO thin films for light emission device have been deposited on sapphire and silicon substrates by pulsed laser deposition technique(PLD). A Nd:YAG laser was used with the wavelength of355 nm. In order to investigate the emission properties of ZnO thin films, Pl measurements with an Ar ion laser a light source using an excitation wavelength of 351 nm and a power of 100 mW are used. All spectra were taken at room temperature by using a grating spectrometer and a photomultiplier detector. ZnO exhibited Pl bands centers around 390, 510 and 640 nm, labeled near ultra-violet(UV), green and orange bands. Structural properties of ZnO thin films are analyzed with X-ray diffraction(XRD).

• 대한전기학회논문지:시스템및제어부문D
• /
• 제53권9호
• /
• pp.622-629
• /
• 2004

In practical control systems, the capacity of actuators is limited and this degrades the system performances and it is often a source of instability. To use full capacity of actuators, we adopt the gain scheduled control permitting the over saturation in controls. The basic idea of gain scheduled control is to use a higher gain control when the state variables are smaller and a lower gain control when the state variables are larger. First, we derive a constant H control and a reachable set while satisfying the degree of over saturation. Next, we divide this set into nested subsets and find $H_{\infty}$ controls at rack subsets while satisfying the degree of over saturation. Finally, the control gain is applied according to the status of states. Note that all procedures are done by solving linear matrix inequalities(LMI). Finally, we show the validity and applicability of our proposed control using the simulations of a six-story building subjected to the earthquake excitation.

• International Journal of Fluid Machinery and Systems
• /
• 제10권3호
• /
• pp.197-208
• /
• 2017

When Francis turbines operate at partial load, residual swirl in the draft tube causes low-frequency pulsation of pressure and power output. Scale effects and system response may bias the prediction of prototype behavior based on laboratory tests, but could be overcome by means of a 1D analytical model. This paper deals with the two most important features of such a model, the compliance and the source of excitation. In a distributed-parameter version, compliance should be represented as an exponential function of local pressure. Lack of similarity due to different Froude number can thus be compensated. The normally unknown gas content in the vortex cavity has significant influence on the pulsation, and should therefore be measured and considered as a test parameter.

• 한국소음진동공학회논문집
• /
• 제20권11호
• /
• pp.1071-1077
• /
• 2010

The reduction of the vehicle interior noise has been the main interest of noise and vibration harshness(NVH) engineers. A passenger vehicle has various and complicated transmission paths of sound and vibration. In order to identify the mechanism of transfer path, estimation of excitation force and exact modeling of transfer path are required. This paper presents method for estimating the noise source contribution on the road noise of the vehicle in a multiple input system where the input sources may be coherent with each other. And vector synthesis technique is employed to identify the characteristics of road noise and its transmission to vehicle compartment through noise and vibration analysis. Vibration reduction efficiency of each transfer path is evaluated by comparing individual vector components obtained virtual simulation.