• Journal of the Korean Ceramic Society
• /
• v.36 no.8
• /
• pp.820-828
• /
• 1999

This study suggests the accurate method to calculate dominant wavelength and excitation purity which are used for analyzing color of glass product. Instead of ruler and magnified chromatricity diagram by using the slope of lines by tristimulus measured and achromatic timulus and by monochromatiic stimulus and achromatic stimulus calculating method of dominant wavelength and excitation purity was acquired with the relation between them. When it was applied to products the obtained results were more accurate than those from existing methods.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.744-747
• /
• 2009

Plasma Display Panels (PDPs) have illustrated impressive results in terms of light emission efficiency of the Ne-Xe mixture compared with the He-Xe mixture. However, He-Xe has shown to achieve superior color purity. This paper presents the optimization of excitation efficiency and color purity for He-Ne-Xe ternary gas mixtures. Furthermore, we investigate the effect that a protective dielectric layer has on UV photon efficiency in a matrix known as electrode type PDP.

• Journal of the Korean Ceramic Society
• /
• v.12 no.1
• /
• pp.29-36
• /
• 1975

This study was conducted to research the formation, color development and application for colored glazes of the spinel solid solutions of the green pigment. On specimens prepared by calcining the oxide and basic carbonate mixture at 1250℃ for 1.5 hour, the x-ray analysis, measurement of reflectance and the test of their stabiality as a glaze pigment were carried out. The results are summarized as follows 1) Each sample is composed of single spinel and not of mixture of spinel. 2) Formation of continuous soild solution, except for a few instances, pertaining to Vegard's law was confirmed by means of the x-ray analysis. 3) The more difference between absorption and reflectance lies, the lighter colors are. When the absorption occurs at the high-reflectance, the excitation purity becomes low. On the contrary when the absorption takes place at the low-reflectance, the excitation purity becomes low. On the contrary when the absorption takes place at the low-reflectance, the excitation purity is higher. 4) Colors obtained in the CdO-MgO-Cr2O3-Al2O3 system, as the amounts of Al3+ increased, change from green through brown to pink, and the absorption peak shifts towards violet region. 5) An increase in Co2+ in the CoO-MgO-Cr2O3-Al2O3 system, changes the color from blue green to dark blue. The excitation purity is higher, and the absorption peak shifts toward regions. 6) Colors are green in the NiO-MgO-Cr2O3 and CdO-MgO-Cr2O3 systems in general, but in the ZnO-MgO-Cr2O3 system brillant hue is not obtained. 70 According to the results of the colored glaze test, the spinels turn outto be stable as brilliant glaze pigment in the calcium-magnesia glaze.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.1 no.1
• /
• pp.7-41
• /
• 1983

Reproduced colors which are half-tone printed at the rate of 10,20,30, ...100% half-tone dot area by each process ink- cyan, magenta, yellow and at the rates of 0,30,60, 100% half-tone dot areas by the mean color mixing of black, cyan, magenta and yellow, are colorimetric analyzed by make use of the 1931 CIE XYZ system of color specification and matching the Munsell color system. Espacially, magenta and secondary colors which are contained magenta, do not have good uniformity and proportionalization in the dominant wavelength and the excitation purity. Half-tone colors without reflection of blue light, are reproduced ideal color with the excitation purity 100% in wavelengths from 555nm to 600nm.

• Korean Journal of Materials Research
• /
• v.18 no.3
• /
• pp.159-162
• /
• 2008

$Eu^{3+}$-activated $R_3GaO_6$ (R = Y, Gd) phosphors were prepared in a conventional solid-state reaction and their optical properties were investigated. These compounds exhibit strong red emission under light excitation at 254 nm. The emission spectra are dominated by peaks appearing around 610-630 nm that are induced by the electric dipole transition of $^5D_0\;{\rightarrow}\;^7F_2$ of $Eu^{3+}$. In addition, the appropriate CIE (Commission Internationale de l'clairage) chromaticity coordinates, (x = 0.656, y = 0.336) for $Y_3GaO_6$ and (x = 0.655, y = 0.334) for $Gd_3GaO_6$, become closer to the NTSC (National Television System Committee) standard values. With the optimized activator concentrations, the maximum emission brightness is approximately 80% of $Y_2O_3$:$Eu^{3+}$ typical red-emitting phosphor with improved color purity under an excitation condition of 254 nm.

• Journal of the Korean Ceramic Society
• /
• v.27 no.1
• /
• pp.67-73
• /
• 1990

The behavior of optical properties of ion exchanged glasses was investigated inthis study. The used glasses were soda-lime-silica glasses that were produced by float process. The coloring effect by Ag colloids is measrued by spectral transmittance, color coordinates, dominant wavelength and excitation purity resulting from silver ions exchange of glasses immersed into the mixed molten salt with AgNO3. Ion exchange coloring of glasses made it possible to obtain glasses with a range from yellow to brown, and transmittance was decreased with increasing the amount of Ag colloids which reduced from Ag+ions. Also, obtain from yellow to reddish brown with increasing purity by reheating treatment in air for ion exchanged glasses. The size of Ag colloids are 0.02~0.1${\mu}{\textrm}{m}$ with ion exchange conditions.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05e
• /
• pp.100-103
• /
• 2003

고휘도 LED(light emitting diode) 빨강(R), 녹색(G), 파랑(B), 호박색(A), 백색(W) 등의 중요한 광학특성인 광속(luminous flux), 효율(luminous efficacy), 피크 파장(peak wavelength), 가중치 평균 파장(weighted average wavelength), 반치폭 (full width at ha1f maximum), 색도좌표(chromaticity coordinate), 주 파장(dominant wavelength), 자극순도 (excitation purity) 와 휘도순도(colorimetric purity)에 대해서 비교검토하였다. 시험결과로 제시된 LED의 기본적인 특성 데이터는 추후, 새로운 조명용 LED 램프나 등기구(luminaire)를 개발 및 특성연구에 많은 도움을 줄 것으로 사료된다.

• Electrical & Electronic Materials
• /
• v.10 no.8
• /
• pp.763-769
• /
• 1997

In this study we have synthesized Zno:Eu phosphors under various sintering atmospheres and temperatures. The analysis of X-ray diffractometer measurement indicates that for Zno:EuCl$_3$ phosphors sintered in air and vacuum 뗘 exists in the host lattice as Eu$_2$O$_3$and EuOCl respectively. From the photoluminescence for the phosphors sintered in vacuum Eu removes the broad-band emission of the ZnO host consequently isolating the red emission due to Eu$^{3+}$ ion and improves the color purity of red emission. The photoluminescence excitation and time resolving spectrum measurements suggest that energy-transfer process occurres from the self-activated defect center in ZnO host the Eu$^{3+}$ ion which exist in the host lattice in the form of EuOCl.

• Journal of Sensor Science and Technology
• /
• v.20 no.1
• /
• pp.30-34
• /
• 2011

Single crystal of KCl doped with $Eu^{2+}$ ions was grown by the Czochralski method in the high pressure Ar gas(purity 99.999 %) atmosphere with chamber pressure from which the crystal with high quality was obtained. As grown $KCl:Eu^{2+}$ crystal was checked by X-ray diffraction. Luminescence properties of KCl:Eu are investigated by laser-excitation spectroscopy under 355 nm excitation at 14 and 295 K. The broad emission band due to the $Eu^{2+}$ 5d $\rightarrow$ 4f transition is peaked at 417 nm with full width at half maximum of about 20 and 30 nm.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11a
• /
• pp.413-418
• /
• 2001

The moire phenomena, which are induced by mask vibration due to the excitation of speakers, degrades the color purity of CRT. So it is important to eliminate this phenomena to obtain a good CRT design. In this study we analyze the mask vibration by experiment as well as finite element method. To obtain the finite element solutions efficiently, an equivalent model was employed. The experimental and analysis results show reasonable agreements. An enhanced design configuration of mask welding points are suggested through this study.