• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.1126-1131
• /
• 2001

Excessive vibration in rotating machinery is a problem encountered in many different fields, causing such difficulties as fatigue of machinery components and failure of supporting bearings. Passive techniques, though sometimes limited in their capabilities, have been used in the past to attenuated vibrations. Recently active techniques have been developed to provide vibration control perform beyond that provided by their passive counters. Most often, the focus of active control methods has been to suppress rotating machinery displacements. In cases where vibration results in bearing failures, displacement suppression may not be the best choice of control approaches (it can, in fact, increase dynamic bearing loads which would be even more harmful to bearings). This paper presents two optimal control methods for attenuating steady state vibrations in rotating machinery. One method minimizes shaft displacements while the other minimizes dynamic bearing reaction forces. The two methods are applied to a model of a typical rotating machinery system and their results are compared. It is found that displacement minimization can increase bearing loads, while bearing load minimization, on the other hand, decreases bearing loads.

• 한국멀티미디어학회논문지
• /
• 제22권2호
• /
• pp.271-280
• /
• 2019

Recently, hearing loss patients have been increasing to excessive use of various multimedia devices. One of the hearing rehabilitation systems, bone conduction hearing aid can be used to conductive deafness patients efficiently. However, the conventional bone conduction hearing systems has some problems such as skin diseases, repulsion of patients, and vibration power reduction by skin damping. In this paper, to overcome the conventional problems, we proposed power improvement method by curved beam diaphragm. The proposed method is skin attachment system which is non-implantable, and then the power of transducer is improved by the proposed method. In order to improve the vibration power of diaphragm, variable that has correlation with displacement are extracted, the diaphragm designed by extracted variable. To verify efficient of the proposed method, experiment conducted by finite element analysis. As a result of, the proposed method confirmed improved power to compare with the conventional method and proposed method.

• 대한치과의사협회지
• /
• 제57권4호
• /
• pp.204-212
• /
• 2019

Introduction : Patients with temporomandibular disorder may have various ear-related symptoms. If an excessive load is applied to the ear area due to the skeletal shape of the mandibular condyle or malposition of the disc, an auditory problems may occur. Case report : The patient was referred to our clinic due to the suspicion of temporomandibular disorder from the local otorhinolaryngology clinic. A few days ago, his right ear could not be heard. MRI showed that the left TMJ disc was anterior displacement with reduction, the right TMJ disc was anteromedial displacement without reduction. Also Right mandibular condyle showed sclerotic bone change, subchondral cyst and was compressing the frontal wall of the ear on MRI view. Right TMJ arthroplasty was done under the diagnosis of right TMJ osteoarthritis and osteochondroma. Postoperative intermaxillary fixation was done with SAS screw and elastics for 2 weeks. One month after the operation, hearing and TMJ discomfort were recovered without any complications. Conclusions As seen in this case, hearing loss due to benign tumor-like lesions of the temporomandibular joint should be treated surgically to restore the TMJ function and hearing.

• Smart Structures and Systems
• /
• 제29권3호
• /
• pp.485-498
• /
• 2022

In near-fault earthquake prone areas, the velocity pulse-like seismic waves often results in excessive horizontal displacement for structures, which may result in severe structural failure during large or near-fault earthquakes. The recently developed isolator-gap damper (IGD) systems provide a solution for the large horizontal displacement of long period base-isolated structures. However, the hysteresis characteristics of the IGD system are significantly different from the traditional hysteretic behavior. At present, the hysteretic behavior is difficult to be reflected in the structural analysis and performance evaluation especially under random earthquake excitations for lacking of effective analysis models which prevent the application of this kind of IGD system. In this paper, we propose a mathematical hysteretic model for the IGD system that presents its nonlinear hysteretic characteristics. The equivalent linearization is conducted on this nonlinear model, which requires the variances of the IGD responses. The covariance matrix for the responses of the structure and the IGD system is obtained for random earthquake excitations represented by the Kanai-Tajimi spectrum by solving the Lyapunov equation. The responses obtained by the equivalent linearization are verified in comparison with the nonlinear responses by the Monte Carlo simulation (MCS) analysis for random earthquake excitations.

• Steel and Composite Structures
• /
• 제47권2호
• /
• pp.239-251
• /
• 2023

The stiffness evaluation of cracked base metal is of great guidance to fatigue crack reinforcement. By carrying out fatigue tests and numerical simulation of typical cracking details in steel box girder, the strain-degradation law of cracked base metal was analyzed and the relationship between base metal stress and its displacement (stiffness) was explored. The feasibility of evaluating the stress of cracked base metal based on the stress field at the crack tip was verified. The results demonstrate that the stiffness of cracked base metal shows the fast-to-slow degradation trend with fatigue cracking and the base metal at 50mm or more behind the crack tip basically lose its bearing capacity. Drilling will further accelerate stiffness degradation with the increase of hole diameters. The base metal stress has a negative linear relation with its displacement (stiffness), The stress of cracked base metal is also related to stress intensity factor and its relative position (distance, included angle) to the crack tip, through which the local stiffness can be effectively evaluated. Since the stiffness is not uniformly distributed along the cracked base metal, the reinforcement patch is suggested to be designed according to the stiffness to avoid excessive reinforcement for the areas incompletely unloaded.

• Structural Engineering and Mechanics
• /
• 제89권1호
• /
• pp.23-31
• /
• 2024

Ratcheting is the cyclic buildup of inelastic strain on a structure resulting from a combination of primary and secondary cyclic stress. It can lead to excessive plastic deformation, incremental collapse, or fatigue. Ratcheting has been numerically investigated on a cantilever beam, considering the current study's primary and secondary bending loads. In addition, the effect of input frequency on the onset of ratcheting has been investigated. The non-linear dynamic elastic-plastic approach has been utilized. Analogous to Yamashita's bending-bending ratchet diagram, a non-dimensional ratchet diagram with a frequency effect is proposed. The result presents that the secondary stress values fall sequentially with the increase of primary stress values. Moreover, a displacement amplification factor graph is also established to explain the effect of frequency on ratchet occurrence conditions. In terms of frequency effect, it has been observed that the lower frequency (0.25 times the natural frequency) was more detrimental for ratchet occurrence conditions than the higher frequency (2 times the natural frequency) due to the effect of dynamic displacement. Finally, the effect of material modeling of ratcheting behavior on a beam is shown using different hardening coefficients of kinematic hardening material modeling.

• 지질공학
• /
• 제17권4호
• /
• pp.601-613
• /
• 2007

연약지반에 보강토옹벽을 시공 시 거동에 영향을 주는 인자로 기본적인 물성뿐만 아니라 보강토옹벽에 의한 하중증가와 압밀기간, 간극수압 등의 영향을 받는 것으로 보고되고 있다. 본 연구에서는 보강토옹벽과 연약지반의 거동해석에 지반해석 프로그램인 SAGE CRISP를 이용하여 수행하였다. 첫 번째로 보강토옹벽의 과도변위를 개선하기 위한 치환공법의 거동 개선 효과를 검토하였으며, 두 번째로 치환공법을 적용 후 보강토옹벽의 배면에 보강재 수직설치간격이 지반의 거동에 미치는 영향을 비교 분석하였다. 마지막으로 치환공법을 적용 시 적정 치환 폭과 깊이를 제안하고자 하였다. 치환공법이 보강토옹벽의 거동 개선에 상당한 효과가 있음을 알 수 있었으며, 보강재 수직설치간격은 옹벽상단의 수평변위 개선효과가 있는 것으로 나타났으나 하단의 수평변위와 옹벽배면의 수직변위 개선효과는 미소한 것으로 나타났다. 또한 치환폭의 증가에 따른 수평 수직변 개선효과는 크지 않은 것으로 나타나 치환폭의 증가는 불필요함을 알 수 있었으며, 적정 치환깊이는 연약층의 두께에 대한 옹벽높이의 비(H/T)에 따라 옹벽높이에 대한 치환깊이의 비(D/H)로 제안하였다.

• Structural Engineering and Mechanics
• /
• 제9권6호
• /
• pp.615-636
• /
• 2000

Some elevated water tanks have failed due to torsional vibrations in past earthquakes. The overall axisymmetric structural geometry and mass distribution of such structures may leave only a small accidental eccentricity between centre of stiffness and centre of mass. Such a small accidental eccentricity is not expected to cause a torsional failure. This paper studies the possibility of amplified torsional behaviour of elevated water tanks due to such small accidental eccentricity in the elastic as well as inelastic range; using two simple idealized systems with two coupled lateral-torsional degrees of freedom. The systems are capable of retaining the characteristics of two extreme categories of water tanks namely, a) tanks on staging with less number of columns and panels and b) tanks on staging with large number of columns and panels. The study shows that the presence of a small eccentricity may lead to large displacement of the staging edge in the elastic range, if the torsional-to-lateral time period ratio $({\tau})$ of the elevated tanks lies within a critical range of 0.7< ${\tau}$ <1.25. Inelastic behaviour study reveals that such excessive displacement in some of the reinforced concrete staging elements may cause unsymmetric yielding. This may lead to progressive strength deterioration through successive yielding in same elements under cyclic loading during earthquakes. Such localized strength drop progressively develop large strength eccentricity resulting in large localized inelastic displacement and ductility demand, leading to failure. So, elevated water tanks should have ${\tau}$ outside the said critical range to avoid amplified torsional response. The tanks supported on staging with less number of columns and panels are found to have greater torsional vulnerability. Tanks located near faults seem to have torsional vulnerability for large ${\tau}$.

• 한국지반신소재학회논문집
• /
• 제13권4호
• /
• pp.161-167
• /
• 2014

본 연구에서는 교대에 인접하여 시공된 보강토옹벽에서 발생한 구조물 변형에 대한 원인을 분석하였으며, 이를 바탕으로 시공된 보강토옹벽의 단면을 유지함과 동시에 구조물의 안정성을 확보할 수 있도록 마이크로 파일을 이용한 보강방안에 대하여 안정성을 평가하였다. 연구대상 구조물의 지속적인 변형은 구조물의 주변환경 조건에 큰 영향을 받은 것으로 나타났으며, 이는 기초지반의 지지력을 감소시켜 중요구조물로서의 안정성 저해요인으로 작용하였다. 이에 보강토옹벽의 지지력 및 전체사면에 대한 안정성을 확보할 수 있도록 보강방안으로 마이크로 파일을 적용하였으며, 이에 대한 안정성 평가 결과, 구조물의 변형 및 구조물을 포함하는 전체사면에 대한 안정성을 확보할 수 있는 것으로 확인되었다. 즉, 시공여건 및 주변환경 조건에 의해 보강토옹벽의 재시공이 불가능한 경우에는 마이크로 파일을 이용한 보강이 충분히 가능한 것으로 판단되었다.

• 대한치과교정학회지
• /
• 제41권5호
• /
• pp.337-345
• /
• 2011

본 연구는 초탄성 니켈-타이타늄 wire로 수직적 높이 차이가 있는 치아의 leveling 과정을 재현하여 wire의 size와 결찰방법에 따른 force system의 변화를 알아보고 여기에 마찰력의 영향에 대해서 알아보고자 하였다. 브라켓은 0.018" slot의 standard twin bracket을 사용하였으며 교정용 wire는 0.014", 0.016" 그리고 0.016" ${\times}$ 0.022" NiTi를 이용하였고 수직적인 높이는 0에서 5 mm까지 1 mm 간격으로 부하와 탈부하 과정을 실험하여 다음과 같은 결론을 얻었다. 마찰력은 loading 시 wire의 stiffness를 증가시켰으며, 0.014" NiTi를 O-ring 결찰을 한 경우에 현저한 stiffness의 증가를 나타내었다. Light wire (0.014)는 수직적으로 5 mm 변위된 치아의 이동 시 2 mm, 0.016"는 3 mm, 0.016" ${\times}$ 0.022"는 4 mm까지의 이동에 유용한 것으로 분석되었다. 본 연구결과는 수직적 변위가 큰 경우에 light wire조차도 적절한 힘을 발휘하지 않은 것으로 나타났다.