• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.4
• /
• pp.455-478
• /
• 2019

In this paper, we conducted experimental investigation on the field applicability through the verification of reinforcement effect of the steel pipe reinforcement grouting using high strength steel pipe. SGT275 (formerly known as STK400) steel pipe is generally applied to the traditional steel pipe reinforcement grouting method. However, the analysis of tunnel collapse cases applying the steel pipe reinforcement grouting shows that there are cases where the excessive bending and breakage of steel pipe occur. One of the reasons causing these collapses is the lack of steel pipe stiffness responding to the loosening load of tunnels caused by excavation. The strength of steel pipe has increased due to the recent development of high strength steel pipe (SGT550). However, since research on the reinforcement method considering strength increase is insufficient, there is a need for research on this. Therefore, in this study, we conducted experiments on the tensile and bending strength based on various conditions between high strength steel pipe, and carried out basic research on effective field application depending on the strength difference of steel pipe through the conventional design method. In particular, we verified the reinforcement effect of high strength steel pipe through the measurement results of deformed shape and stress of steel pipe arising from excavation after constructing high strength steel pipe and general steel pipe at actual sites. The research results show that high strength steel pipe has excellent bending strength and the reinforcement effect of reinforced grouting. Further, it is expected that high strength steel pipe will have an arching effect thanks to strength increase.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.2 no.2
• /
• pp.50-61
• /
• 2000

The ground around the portal of a tunnel is the most typical part showing the 3-dimensional mechanical behavior in the tunnel. The portal slope is constructed at the weathered soft rock-mass, and remains as a potential sliding mass. The slope failure around the tunnel portal may happen drastically and induce the great disaster; hence, for the permanent stability several special techniques are required. To solve this problem, the ground around the tunnel portal may be excavated in the arch shape to develop the arching effect in horizontal direction. With the arch-type portal slope, one can reduce considerably the excavation mass and the damage of environments. This approach has not been attempted yet due to the lack of understanding and the well-defined analyzing method, so the retaining wall type portal is more universal. The 3-dimensional finite element analyses were carried out to prove that the arch type is more advantageous in safety and cost than the right angle type. The influence of the tunnel construction sequence and the strength of the rock-mass on the slope stability was investigated by focusing on the maximum shear strain in the slope, and the yield zone at the tunnel face.

• Korean Journal of Heritage: History & Science
• /
• v.42 no.3
• /
• pp.132-153
• /
• 2009

A lotus flower pattern of the shape of straight and pointed petals has the forms whose lotus flowers are pointed, and is one of the representative forms of lotus flower pattern of Baekjae along with a round and a triangle protruded style. This style of lotus flower pattern was applied to roof-end tiles, halos of Buddhist images, containers of Buddha's bones, head supports, etc. from the Hanseong period to the Sabi period of Baekjae. However most of lotus flower patterns that remain today were used for the tiles of the Sabi period. Many of them were produced under the influence of the Northern Dynasties and the Southern Dynasties of China, and of Goryeo, which implies the active cultural exchange of Baekjae at that time. Among the present lotus flower patterns of the shape of the straight and pointed petals, that of the earliest time is from Gyeongdang district of Poongnab mud castle and belongs to the mid-fifth century. However there is a higher chance that the gradual subsequent excavation and research will find some tiles of the earlier period and other styles can also be unearthed.

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.11
• /
• pp.45-53
• /
• 2016

A precast panel wall system resists against the horizontal earth pressure by increasing the shear strength of ground by reinforcement connected to the panel. The application of precast panel wall system is growing to lately minimize the earth work and environmental damage caused by large cut slope and to use the limited land effectively. The ground adhered panel wall system is the construction method that has the panel engraved with natural rock shape to improve the landscape. This system is developed to complete Top-Down method, and it is possible to have vertical cut, and to adhere to in-situ ground, improve construction ability by minimizing the ground relaxation and exclusion the trench and backfill process. In this study the field tests were performed to verify the construction ability about the vertical cut and complete Top-Down process and the construction behavior of ground adhered panel wall system was analyzed by large scale loading test and measurement results during loading test.

• Journal of the Korean Geosynthetics Society
• /
• v.17 no.1
• /
• pp.55-64
• /
• 2018

The purpose of this study is to evaluate the suitability of emergency underground cavity restoration method filling cavity with expansive material based on numerical analysis. For the numerical analysis, experiments were conducted to evaluate properties of expansive material. Based on the measured expansion pressure of the expansive material from the experiment, behavior of underground cavity restoration with various cavity dimensions (variation of height and width of rectangular-shape cavity) was numerically assessed. As a result of analysis, the vertical displacements of the top and bottom of cavity were significantly influenced by the cavity width and lateral displacements of cavity sides were highly dependent on cavity height. These vertical and lateral displacements were increased with increasing expansion pressure of expansive material. Also, when the expansion pressure was applied, the vertical displacement of the upper surface layer of the road was less dependent on cavity height, and was greatly influenced by cavity width.

• Journal of the Korean Society of Costume
• /
• v.63 no.3
• /
• pp.1-16
• /
• 2013

Xiognu people were the first of the Central-Asian nomads to establish a nation in 209 B.C. They always moved around looking for places to breed their animals and fertile grounds, so they wore clothes made of fur and leather and covered their tents with felt from the livestock. This research studies on the literatures, costumes and the achievement of archaeological excavation. Furthermore, to investigate on costumes excavated of Xiongnu, we visited the Mongolian National Museum and the Hermitage Museum. A corn-hat made of felt, a felt hat with ear flaps and a golden crown with a bird on the top were unearthed from a tomb of Xiongnu in Inner mongolia. Women usually wore pigtails, and men wore pigtails or ponytails but they cut their hair short when holding a funeral. Many pigtails discovered in Noyon uul tombs can be considered as their funeral customs. The Xiongnu wore a round or v-neck caftan attached straight sleeves reaching knees in the left folded style, and because they always rode horses, having the length of the caftan not go past their buttocks would have made it more convenient for them. During the period of Western Han, Ho refered to Xiongnu and it became a common name for northern races. They used leather belts and an animal-designed buckle was found. Women commonly rouged their cheeks for a vivid and cute look, and many ornaments were excavated including bracelets, rings and decorations made of gold, silver, copper and jade, among which there were hair ornaments used to identify one's class. A horse pattern with wings and a horn of Golmod T20 was substitution for the Schythian use of deer. Patterns or shape of unearthed articles present in the Xiongnu culture in Noyon uul had a close relationship with Altaic, Greek and Persian cultures. The Xiongnu clothing was made of animals' skin and fur, woolen textiles and felt. It was folded to the left for upper garments, and the pants were adjusted using a belt and shoes were made of leather, which was very suitable for protection against the cold and horse riding. Mobility played a significant role in their clothing.

• Korean Institute of Interior Design Journal
• /
• no.11
• /
• pp.57-63
• /
• 1997

In the early 20'c, scientific thoughts make a change the absolute and separate concept of space-time into relative concept of continual entity; a kind of ideal world. It suggests that the meaning of geometry as absolute truth with which has endowed human beings would changed to a relative meaning of accumulation in intellectual work on 'nature'. This cognitive changes appeared into absolute arts in 20'c like Cubism, Superematism or Constructivism. De Stijl movement which had recepted the relative concepts like Einstein's 'theory of relativity' as a developed thought from Newton-Cartesian cognition on the world. Abstration would be adequate method for expressing the dynamics and interrelationship between forms and for giving values to indivisual elements in a compositiov. This method had appeared Modern architectural form, as a common framework. The expression characteristics of geometrical design in Deconstructive and Experimental architecture were summerized in four features through the results of the analysis. First, the relation of architectural element and intertextuality is expressed in discontinuation of context and refusal of functional building. Second, the concept of trace expresses as connection of place, decomposing of excavation of trace, trace of axis, trace of fragments. Third, anti-gravity expression is there to express of open cubic, to outgrow of rectangular system, to outgrow of volume, to separate of ground connectiov. Fourth, the complex composition of abstracted geometric form is these to abstracted geometry about indefinite shape, to layer through the overlap and collage, to de-meaning and amusement of form through the pursuit of uncertainty, to indeterminate of formal meaning through operation and composition of similar form cause to the diverse of meaning.

• Geotechnical Engineering
• /
• v.13 no.2
• /
• pp.155-168
• /
• 1997

Lattice girder is a new steel support developed in Europe for the replacement of an existing H-shaped steel set, which is installed after tunnel excavation. Lattice girder has the following several advantages : 1. Lattice girder minimizes the amount of shotcrete shadow which happens to occur behind a steel support. 2. A triangular shape of lattice girder makes shotcrete placed efficiently. 3. Lattice girder provides a good bond strength for shotcrete, which makes the composite structure of lattice girder and shotcrete behave monolithic, and therefore, the rock load can be supported effectively by the lattice girder system, This paper presents the results from a model wall test, a strength test for shotcrete shot on the model wall and a strength test for the bond between lattice girder and shotcrete. These tests proved that lattice-girder system is superior to H-shaped steel-set system concerning the shotcrete rebound rate, the developed shotcrete strength and the adhesion characteristics.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2004.08a
• /
• pp.180-189
• /
• 2004

The name of (Ban)wolseong thanks to its having a shape like a half-moon. Wolseong fortress is one of 'Gyeongju Historic Area', world heritage. The Silla kingdom's royal palace previously maintained its capital fortress at the locale of Wolseong. However its real face has been kept in mystery. This study grafts Geophysics on modern Archaeology and approaches with scientific and systematic methods to an excavation plan or archaeological study by means of GPR exploration which can complement archaeological curiosity without destroying Wolseong fortress. The exploration area is $12,000m^2$ in front of Seokbinggo(stone storage for ice). It is only $10\%$ area of Wolseong fortress. As a conclusion, GPR detected 7 of squared buildings($8{\times}8m^2$ size), stone wall, an entrance for the fortress, lots of foundation stones, road(presumptive), and a presumptive pond which size is 35${\~}$40m in diameter.

• Geomechanics and Engineering
• /
• v.20 no.6
• /
• pp.475-484
• /
• 2020

The prediction of the ground conditions ahead of a tunnel face is very important, especially for tunnel boring machine (TBM) tunneling, because encountering unexpected anomalies during tunnel excavation can cause a considerable loss of time and money. Several prediction techniques, such as BEAM, TSP, and GPR, have been suggested. However, these methods have various shortcomings, such as low accuracy and low resolution. Most studies on electrical resistivity tomography surveys have been conducted using numerical simulation programs, but laboratory experiments were just a few. Furthermore, most studies of scaled model tests on electrical resistivity tomography were conducted only on the ground surface, which is a different environment as compared to that of mechanized tunneling. This study performed a laboratory experimental test to extend and verify a prediction method proposed by Lee et al., which used electrical resistivity tomography to predict the ground conditions ahead of a tunnel face in TBM tunneling environments. The results showed that the modified dipole-dipole array is better than the other arrays in terms of predicting the location and shape of the anomalies ahead of the tunnel face. Having longer upper and lower borehole lengths led to better accuracy of the survey. However, the number and length of boreholes should be properly controlled according to the field environments in practice. Finally, a modified and verified technique to predict the ground conditions ahead of a tunnel face during TBM tunneling is proposed.