• Journal of Electrical Engineering and Technology
• /
• 제1권1호
• /
• pp.28-34
• /
• 2006

Recently, in accordance with the development of IT technology, it is prevalent for power quality monitors to be connected to each other via networks and share their data because such networks provide system-wide insights to customers concerning power quality. Those systems can alarm and display power quality events for the convenience of customers. However, if a power quality event occurs, it is difficult for customers to determine its cause and solution because the systems do not provide appropriate power quality diagnosis functions. The power quality management system presented in this paper has been developed to provide customers with various power quality diagnosis functions so that they can cope well with power quality problems with the right measure in the right place. This paper presents the structure and functions of the developed power quality management system and shows some results of the power diagnosis functions.

• 한국공작기계학회논문집
• /
• 제13권5호
• /
• pp.87-95
• /
• 2004

From the results of AE(Acoustic Emission) source location occurred by the spot exciting as suggested in this research, it has been confirmed that AE technique is quite fruitful in figuring out the location of the occurrence, form, size and direction of the defects. As the results of examining the distribution of event for the angle of crack $\alpha$ to Xs and Ys, as the increases from $0^{\circ}$ ~ $90^{\circ}$, gradually changes its width from the axis Xs to the axis Ys. So event appears approximately similar in its size at the angle of crack $\alpha$=$45^{\circ}$, yet opposite when $\alpha$ is lager. It is believed that this is a phenomenon where its crack legnth $\alpha$, assumed as a planar defect, is to be prcjected toward the direction with a larger size. Thus, it is expected that the application of the experimental method suggested in this study would make it possible to identify the location of the defect in the material in the nondestructive way.

• Earthquakes and Structures
• /
• 제11권6호
• /
• pp.1143-1164
• /
• 2016

Time Delay of Arrival (TDOA) estimation methods based on correlation function analysis play an important role in the micro-seismic event monitoring. It makes full use of the similarity in the recorded signals that are from the same source. However, those methods are subjected to the noise effect, particularly when the global similarity of the signals is low. This paper proposes a new approach for micro-seismic monitoring based on cross wavelet transform. The cross wavelet transform is utilized to analyse the measured signals under micro-seismic events, and the cross wavelet power spectrum is used to measure the similarity of two signals in a multi-scale dimension and subsequently identify TDOA. The offset time instant associated with the maximum cross wavelet transform spectrum power is identified as TDOA, and then the location of micro-seismic event can be identified. Individual and statistical identification tests are performed with measurement data from an in-field mine. Experimental studies demonstrate that the proposed approach significantly improves the robustness and accuracy of micro-seismic source locating in mines compared to several existing methods, such as the cross-correlation, multi-correlation, STA/LTA and Kurtosis methods.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2020년도 학술발표회
• /
• pp.114-114
• /
• 2020

Water contamination in a water distribution network (WDN) is harmful since it directly induces the consumer's health problem and suspends water service in a wide area. Actions need to be taken rapidly to countermeasure a contamination event. A contaminant source ident ification (CSI) is an important initial step to mitigate the harmful event. Here, a CSI approach focused on determining the contaminant intrusion possible location and time (PLoT) is introduced. One of the methods to discover the PLoT is an inverse calculation to connect all the paths leading to the report specification of a sensor. A filtering procedure is then applied to narrow down the PLoT using the results from individual sensors. First, we spatially reduce the suspect intrusion points by locating the highly suspicious nodes that have similar intrusion time. Then, we narrow the possible intrusion time by matching the suspicious intrusion time to the reported information. Finally, a likelihood-score is estimated for each suspect. Another important aspect that needs to be considered in CSI is that there are inherent uncertainties, such as the variations in user demand and inaccuracy of sensor data. The uncertainties can lead to overlooking the real intrusion point and time. To reflect the uncertainties in the CSI process, the Monte-Carlo Simulation (MCS) is conducted to explore the ranges of PLoT. By analyzing all the accumulated scores through the random sets, a spread of contaminant intrusion PLoT can then be identified in the network.

• 아태비즈니스연구
• /
• 제13권4호
• /
• pp.135-149
• /
• 2022

Purpose - The primary objective of this article is to investigate the impact of U.S. monetary policy on institutional / individual / foreign investor reactions in the Korean stock market. Design/methodology/approach - This study employs a high frequency event study methodology to identify U.S. monetary policy shocks and quantify the impact of identified shocks on investor reactions. The dependent variable in the regression model is net stock purchase, while the explanatory variables are U.S. monetary policy shocks. The model is estimated for the period 2000-2019, including 156 FOMC meetings. Findings - Foreign investors immediately sell stocks in response to contractionary U.S. monetary shocks. They do not, however, react to anticipated changes in monetary policy rates, confirming the rationality of foreign investors. Individual investors demonstrate the opposite response, indicating that a non-trivial proportion of individual investors are irrational. Research implications or Originality - This study adds to the current literature on the effect of U.S. monetary policy on the Korean stock market. This study demonstrates a heterogeneous response to U.S. monetary policy shocks, validating the rational investment behavior of foreign investors, while individual investors exhibit a certain degree of irrationality. Methodologically, this study adds to the literature by quantifying the impact of U.S. monetary policy employing a sharper identification method allowing a simple and consistent estimation.

• 한국컴퓨터정보학회논문지
• /
• 제18권1호
• /
• pp.137-147
• /
• 2013

RFID(Radio Frequency Identification)와 WSN(Wireless Sensor Network)은 기술적 유사성과 상호 영향에도 불구하고 별개의 연구로 인식되었으며 RFID와 WSN의 기술적인 융합에 대한 연구는 미비한 수준이다. 이러한 문제점을 인식한 EPCglobal에서는 국제 표준인 EPCglobal Network를 기반으로 RFID와 WSN 기술을 효율적으로 통합/연동할 수 있는 EPC(Electronic Produce Code) 센서 네트워크를 제안하였다. 제안된 EPC 센서 네트워크는 미들웨어에서 복합 이벤트 처리(Complex Event Processing) 기법을 이용하여 RFID와 WSN을 통해 발생되는 데이터를 단일 환경에서 통합하고, 발생된 이벤트를 EPC global Network를 기반으로 연동하는 기술이다. 하지만 이러한 EPC 센서 네트워크는 미들웨어에서 복합 이벤트를 검출하기 위해 복합 이벤트를 구성하는 모든 기본 이벤트가 발생하지 못하는 경우에도 계속적인 검사를 수행하기 때문에 연산 비용이 증가되는 문제점이 있다. 이러한 EPC 센서 네트워크의 문제점들을 해결하기 위하여 본 논문에서는 미들웨어에서 복합 이벤트의 최소 조건을 정의하고 조건을 만족하는 경우에만 복합 이벤트를 검출하는 알고리즘을 제안하였다. 복합 이벤트의 최소 조건을 검사하기 위하여 인덱스 기반의 질의 색인을 사용하여 복합 이벤트를 추출한다. 제안하는 인덱스 기반의 복합 이벤트 검출 알고리즘은 기존의 검출 알고리즘과 NS2 시뮬레이션을 이용하여 성능 평가를 수행하여 복합 이벤트를 검출하는 시간에서는 기존 알고리즘과 비교하여 평균 6.8msec 적게 나타났으며, 검출에 필요한 연산수는 기존 알고리즘과 비교하여 평균 226개로 적은 연산 수를 나타내었다. 결과적으로 기존 알고리즘에 비해 복합 이벤트 검출을 위해 제안하는 알고리즘이 우수한 성능을 나타내었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.605-613
• /
• 2007

위험 분석을 위한 방법론은 결정론적 정성적 접근과 확률론적 정량적 접근으로 대별될 수 있는데, 보다 현실적으로 다양한 요인을 적극적으로 고려할 수 있는 정량적 방법론은 효율성이 높으나 모델의 복잡성과 자료수집의 어려움을 극복하는 것이 필요하다. 본 연구에서는 복잡한 모델링을 체계적으로 수행하여 철도 건널목에서의 사고로 인한 위험도를 정량적으로 평가하기 위한 방법론을 도출하고 기본적인 적용성 연구를 통해, 정량평가 방법론의 유용성을 입증하고 추후 철도 통합 위험도 평가 시스템의 개발에 반영하는 목적으로 수행되었다. 제안된 위험도 평가를 위한 방법론은 다음과 같이 요약될 수 있다. 먼저 Preliminary Hazard Analysis 결과로부터 철도 사고에 대한 위험요인 목록을 작성하고 사건수목(Event Tree)을 이용하여 위험요인별로 사고 시나리오를 전개한다. 사건수목중 사건수목 분기확률을 정량화하기위해 보조논리를 필요로 하는 경우에 대해서 고장수목(Fault Tree)을 작성한다. 작성된 사건수목과 고장수목에 정량화를 위해 필요한 평가 자료를 입력하고 통합 정량화 방법론을 적용하여 최종 정량화를 수행한다. 정량화된 결과에 사고 상황을 고려한 해석을 수행하고 필요하다면 민감도 분석이나 불확실성 분석이 수행한다. 본 연구에서는 이러한 분석 방법론을 전국 철도건널목 사고 분석에 시범 적용하였다. 또한 2005년 국내 철도 건널목에서 발생한 사고자료를 이용하여 시범적인 정량화를 수행하여 그 적용성을 보였다.

• 한국의료질향상학회지
• /
• 제21권1호
• /
• pp.66-76
• /
• 2015

Objectives: The purpose of this study is to develop a case review form for detecting adverse events through a medical records review in hospitalized patients in South Korea. Methods: To develop the case review form, several literatures were reviewed, first. Through the clinical expert meeting, screening criteria were selected and case review form was developed. Result: The Korean version of case review form consisted of the review form-1 for adverse event screening and form-2 for adverse event identification. The applied methodology for the case review form is determined according to the previous studies. For example, the method used in the first stage review is nurse review. Furthermore, the National Coordinating Council for Medication Errors Reporting and Prevention index is used to categorize disability, and a scale of 1 to 6 was used in the causation scores and preventability scores, respectively. Through the clinical expert meeting, a total of 41 screening criteria were selected. Conclusion: The Korean specific case review form was developed for detecting adverse events in hospitalized patients. The results from this study can be used in a large-scale study regarding the nationwide incidence of adverse events.

• Nuclear Engineering and Technology
• /
• 제53권10호
• /
• pp.3406-3412
• /
• 2021

A real-time digital time-stamp sorting algorithm used in the In-Beam positron emission tomography (In-Beam PET) is presented. The algorithm is operated in the field programmable gate array (FPGA) and a small amount of registers, MUX and memory cells are used. It is developed for sorting the data of annihilation event from front-end circuits, so as to identify the coincidence events efficiently in a large amount of data. In the In-Beam PET, each annihilation event is detected by the detector array and digitized by the analog to digital converter (ADC) in Data Acquisition Unit (DAQU), with a resolution of 14 bits and sampling rate of 50 MS/s. Test and preliminary operation have been implemented, it can perform a sorting operation under the event count rate up to 1 MHz per channel, and support four channels in total, count rate up to 4 MHz. The performance of this algorithm has been verified by pulse generator and ²²Na radiation source, which can sort the events with chaotic order into chronological order completely. The application of this algorithm provides not only an efficient solution for selection of coincidence events, but also a design of electronic circuit with a small-scale structure.

• 한국멀티미디어학회논문지
• /
• 제13권2호
• /
• pp.171-178
• /
• 2010

무인감시시스템은 무선 칩 같은 기초적인 센서를 이용하는 분야는 많이 연구 되어 왔으며. 카메라를 주요 센서로 하는 영상감시체계 연구 분야가 활성화 되고 있다. 본 논문에서는 다양한 영상검지기법을 조사 분석한 결과를 토대로 영상 객체 인식 기법을 적용한 지능형 영상검지 시스템을 제안하였다. 이 지능형 영상검지 시스템은 사건 전후의 상황을 쉽게 추적 판단 할 수 있으며, 확실한 증거와 다양한 정보를 확보 할 수 있다. 따라서 본 논문에서 제안하는 지능형 영상 검지 시스템은 교통상황 관리, 재난 경보 등 다양한 무인감시시스템에 활용 될 것이다.