• Journal of the Economic Geographical Society of Korea
• /
• v.17 no.3
• /
• pp.482-501
• /
• 2014

Most textbooks of urban geography explain that land value drops down with distance from the Peak Land Value Intersection of urban center. However, There is little rigorous empirical work supporting this belief. Using the publicly notified individual land price data of 2013, this paper examines the structure of land value in urban center with a focus on spatial distribution of land value by land use. As an analytic result, the structure of land price varies between land uses, significantly being different from the classical model of land value in urban space. In residential lands and mixed-use lands for residence and commerce, land price gradient as a function of distance from PLVI is positive and a crater phenomenon even is identified in spatial distribution of land value. The classical model coincides only with land for commerce and office. Nonetheless, predict of land uses by land value function fairly corresponds to Alonso's model.

• Applied Chemistry for Engineering
• /
• v.24 no.5
• /
• pp.562-565
• /
• 2013

The high purity Al foil, which has an enlarged surface area by electrochemical etching process, has been used as an anode for an aluminum electrolytic capacitor. Etch pits are randomly distributed on the surface because of the existence of surface irregularities such as impurity and random nucleation of pits. Even though a large surface area was formed on the tunnel-etched Al, its applications to various fields were limited due to non-uniform tunnel morphologies. In this work, the selective electrochemical etching of aluminum was carried out by using a patterned mask fabricated by photolithographic method. The formation of etch pits with uniform distribution has been demonstrated by the optimization of experimental conditions such as current density and etching solution temperature.

• Korean journal of applied entomology
• /
• v.47 no.1
• /
• pp.107-110
• /
• 2008

Tropical fire ant, Solenopsis geminata (Fabricius) is distributed over the tropical and temperate areas. It is a polyphagous pest attacking to various plant and causes the pain to the people doing outdoor work. So it is known for a hygienic pest to human being, especially the people doing outdoor activities. It can cause severe pain to human, even with just a bite. Of particular concern is the possibility of its settlement in this country, if it invade to the farmlands and/or forests of Jeju Island and southern part in Korea. It is listed as a regulated pest in Plant Quarantine Act of Korea. This ant is usually imported through a ship and early settled in the port area where it is already distributed. Recently its distribution is rapidly spreading into Southeast Asia and southern part of China. In Korea, it was detected the one time in 1990s, but was detected the ten times from 2000 to 2006 by an imported plant quarantine process. Therefore, we would like to provide some information on the species, including morphology, distribution, host plant, damaged symptom and its general bionomics, which will be useful data for plant quarantine process and control.

• Journal of Energy Engineering
• /
• v.21 no.2
• /
• pp.124-132
• /
• 2012

This study presents the simulation results of Photopia when a lecture room with north-facing windows were illuminated by two different types of daylighting systems to improve the imbalance in its lighting conditions. Especially, the candela power distribution curves (CDCs) on a clear sunny day at the summer solstice, reaching $80^{\circ}$ in solar altitude, were analyzed with respect to the illuminance available at task areas (work planes). The difference between its illuminance on the north and south areas exceeded 1,000 lux without any daylighting system. This, however, decreased drastically with the application of a daylighting system. When a light tube system was introduced, it reduced from 906lx to 603lx and, even further to 308lx with the application of a dish concentrator system. Generally, the performance of a light tube system was greatly influenced by solar altitude while its effect on the dish concentrator system was rather negligible.

• Journal of Korea Water Resources Association
• /
• v.41 no.6
• /
• pp.587-595
• /
• 2008

In order to aid the derivation of the IDF relationship for a station with insufficient duration-rainfall data, an approach to derive a simple and practical IDF formula is presented. The IDF formula is described simply by the term of the two parameters and a design frequency. The model parameters were estimated from a statistical technique based on the normal distribution of transformed rainfall intensities. In order to give the transformed data, both the Kruskal-Wallis statistic and the Manly transformation of duration-rainfall data were adopted. With the methods, the proposed IDF formula becomes a simpler model that compares well with conventional form. In addition, it allows avoiding an exceptional condition of the higher rainfall intensity for longer duration. The performance of the proposed formula was evaluated by using the limited rainfall data for short duration from two gauge stations. The result showed that the IDF formula developed in this work was an effective tool, providing a reliable relationship between the intensity and duration even though insufficient data are only available.

• Journal of Korean Public Health Nursing
• /
• v.6 no.1
• /
• pp.32-45
• /
• 1992

An important role of community health nurses in health centers is to solve community health problems found through data collection methodology which has been used to identify the health needs of the community, diagnose the health problems and to plan health programs suitable for the health problems. Also community health nurses must be prepared to know the community health needs and to participate in the planning process. Since 1956 when the health center law was established, community health nurses have really implemented only the services which the government has asked them to do. This has kept them busy enough. But these days as society is in rapid change, community health nurses should have the flexibility to deal with the social change and demands that are unique to their community each which has different health needs and demands. So community health nurses need to identify what community health problems exist in their particular communities. The purposes of this study were as follows. 1) To explore the suitability of the health programs which the government has asked the community health nurses to do for their own communities and if these programs are not suitable, to explore the reasons why. 2) To explore the degree to which the community health nurses have the ability to identify health problems in their own communities and activate the community diagnostic process. 3) To identify the degree that the community health nurses have the ability to implement plans related to community diagnosis. 4) To find out how much data related to community health problems, the community health nurses have and how they are utilizing it. 5) To measure the community health nurses self-confidence concerning diagnostic activities for community health. The study subjects were 454 Community Health Nurses working in Health Centers in Seoul, Korea. The period of data collection was 6 days(Nov. 9th 1991-Nov. 15th 1991). A questionnaire used for data collection was composed of three different items; general characteristics, community health diagnostic activities and self-confidence in performing diagnostic activities. The results of the study are as follows. First, over one third of the respondents replied that the government required activities for their communities are not appropriate. Of these activities the most frequent reply $(51.2\%)$ indicated that many of the activities in the community were inappropriate to the actual situation. Further, $25\%$ of the replies indicated that many activities were only administratively oriented and as such not appropriate. Second, $49.8\%$ of the respondents replied that they had done general assessments and had a general idea of the health problems of their community. Effective solutions to health problems could be found with an increase in health personnel and management ability according to $41.5\%$ of the respondents. Third, to the question as to whether they had ever independently implemented a plan towards solving community diagnosed problems, $52\%$ of nurses replied 'never', $40\%$ 'occasionally' but only $7.5\%$ replied that they did it frequently. Actually there was very little done even in the basic work of collecting the necessary data. Fourth, when asked how much of basic information they had collected that might be used in community diagnosis activity, of 26 items in 5 areas, there was hardly one for which complete data had been collected. Fifteen percent did have data on the geographical aspects of their area, housing distribution and types of housing, while $17.8\%$ knew the frequency with which the health center was used. Concerning community resources, even with a list of community resources, only $12.3\%$ had data on any of these resources, and this data was incomplete. Further, information about social work institutions, and facilities was also incomplete, only $14.2\%$ of the respondents had any data and even it was incomplete; that is, in general, the nurses did not have this information. Fifth, concerning the confidence of the community health nurse in their ability to carry out community diagnoses activities, $60\%$ replied that they were very or at least nominally confident, indicating that although they were not doing community diagnostic activities they felt they could do so, as they were carrying out home visits and program planning as part of their official duties. The following recommendations are made based on the results of this study. First; since the community health nurses have a high perception of the need for community diagnostic activities and. high confidence in their ability to carry out this activity and high percentage of respondents replied that with a little training they could do this even better it is recommended that community diagnostic activity training be included in the continuing education program for community health nurses. Second, in order for the Community Health Nurses to successfully solve the health problems of their respective community they reported to a need to increase the number of health personnel, improve the facilities and the system of managing their work. Considering this, it is recommended that ways be sought to remedy these deficits.

• Journal of Sericultural and Entomological Science
• /
• v.13 no.2
• /
• pp.123-133
• /
• 1971

The author is the first man who tried to use an anesthetic on insect specially for silkworm in orde to evaluate the silkworm health and silk yielding ability and the obtained results are as followings. 1. The necessary ether vapor induction for narcosis on silkworms is varied by the glowth of the silkworm which the larger worm is, the longer induction is required. For instance, it was 2∼3 minutes for the worms of third day fifth instar silkworm in case use of ether anesthetic. 2. The longer anesthetic induction for silkworms, the longer recovery needs from anesthesia. In case five minutes ether vapor induction, silkworms recovered narcosis during in 5∼130 minutes which had varied very much by the health variation. 3. The ether induction caused silkworm to vomit digestive juice from a few per cent of the worms, but the chloroform induction showed majority of the worms to vomit the digestive juice out of mouth. So, the ether was found as better anesthetic for silkworms. 4. When ether induction last more than 20∼30 minutes, the recovered silkworms can eat mulberry, but when it gets more than three hours they can not eat mulberry. And when it last more than ten minutes, the silkworm may eat mulberry leaf, but they can not spinn cocoon properly. 5. In case five minutes ether induction for silkworms on third day fifth instar, the stronger variety is, the rallier recovered from narcosis. 6. The recovering duration from narcosis varies regarding with each worm health which shows Poisson′s distribution even in a same variety silkworm. 7. The female worms recover from narcosis earlier than male worms which means the female worm is stronger than male one. 8. The later recovered silkworm from narcosis spinned more rich cocoon silk and ended with smaller pupae weight. Such a tendency showed until at some recovery duration, then the silk yield droped down on the worms recovered in more longer duration. The author (Choe) had named such a relation curve as "Silk Yield Curve against Silkworm Health." 9. The silk yield or cocoon layer ratio had varied from 13 to 27% even in a same worm varity cocoon which showed serious variation and call attention carefulness for the duplication work of a variety silkworm eggs. 10. Not always the rich silk yielding worm is the best worm during the silkworm selection and it should be considered with the silkworm health evaluation. 11. At present situation, only specific breeding expert is allowed to join in the selection service because of need many years experience by use of visual observation, but the ether anesthesia method may help such an evaluation with more accuracy and easy way even for the people in fresh on the field. 12. The effect of the narcosis on the silkworm for the next generation or hybrid worm will be reported in next publication.

• Nuclear Engineering and Technology
• /
• v.39 no.5
• /
• pp.603-616
• /
• 2007

Roy Huddle, having invented the coated particle in Harwell 1957, stated in the early 1970s that we know now everything about particles and coatings and should be going over to deal with other problems. This was on the occasion of the Dragon fuel performance information meeting London 1973: How wrong a genius be! It took until 1978 that really good particles were made in Germany, then during the Japanese HTTR production in the 1990s and finally the Chinese 2000-2001 campaign for HTR-10. Here, we present a review of history and present status. Today, good fuel is measured by different standards from the seventies: where $9*10^{-4}$ initial free heavy metal fraction was typical for early AVR carbide fuel and $3*10^{-4}$ initial free heavy metal fraction was acceptable for oxide fuel in THTR, we insist on values more than an order of magnitude below this value today. Half a percent of particle failure at the end-of-irradiation, another ancient standard, is not even acceptable today, even for the most severe accidents. While legislation and licensing has not changed, one of the reasons we insist on these improvements is the preference for passive systems rather than active controls of earlier times. After renewed HTGR interest, we are reporting about the start of new or reactivated coated particle work in several parts of the world, considering the aspects of designs/ traditional and new materials, manufacturing technologies/ quality control quality assurance, irradiation and accident performance, modeling and performance predictions, and fuel cycle aspects and spent fuel treatment. In very general terms, the coated particle should be strong, reliable, retentive, and affordable. These properties have to be quantified and will be eventually optimized for a specific application system. Results obtained so far indicate that the same particle can be used for steam cycle applications with $700-750^{\circ}C$ helium coolant gas exit, for gas turbine applications at $850-900^{\circ}C$ and for process heat/hydrogen generation applications with $950^{\circ}C$ outlet temperatures. There is a clear set of standards for modem high quality fuel in terms of low levels of heavy metal contamination, manufacture-induced particle defects during fuel body and fuel element making, irradiation/accident induced particle failures and limits on fission product release from intact particles. While gas-cooled reactor design is still open-ended with blocks for the prismatic and spherical fuel elements for the pebble-bed design, there is near worldwide agreement on high quality fuel: a $500{\mu}m$ diameter $UO_2$ kernel of 10% enrichment is surrounded by a $100{\mu}m$ thick sacrificial buffer layer to be followed by a dense inner pyrocarbon layer, a high quality silicon carbide layer of $35{\mu}m$ thickness and theoretical density and another outer pyrocarbon layer. Good performance has been demonstrated both under operational and under accident conditions, i.e. to 10% FIMA and maximum $1600^{\circ}C$ afterwards. And it is the wide-ranging demonstration experience that makes this particle superior. Recommendations are made for further work: 1. Generation of data for presently manufactured materials, e.g. SiC strength and strength distribution, PyC creep and shrinkage and many more material data sets. 2. Renewed start of irradiation and accident testing of modem coated particle fuel. 3. Analysis of existing and newly created data with a view to demonstrate satisfactory performance at burnups beyond 10% FIMA and complete fission product retention even in accidents that go beyond $1600^{\circ}C$ for a short period of time. This work should proceed at both national and international level.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.2
• /
• pp.62-72
• /
• 2019

Due to the difficulties in forecasting the intensity and the source location of tsunami the countermeasures prepared based on the deterministic approach fail to work properly. Thus, there is an increasing demand of the tsunami hazard analyses that consider the uncertainties of tsunami behavior in probabilistic approach. In this paper a fundamental study is conducted to perform the probabilistic tsunami hazard analysis (PTHA) for the tsunamis that caused the disaster to the east coast of Korea. A logic tree approach is employed to consider the uncertainties of the initial free surface displacement and the tsunami height distribution along the coast. The branches of the logic tree are constructed by reflecting characteristics of tsunamis that have attacked the east coast of Korea. The computational time is nonlinearly increasing if the number of branches increases in the process of extracting the fractile curves. Thus, an improved method valid even for the case of a huge number of branches is proposed to save the computational time. The performance of the discrete weight distribution method proposed first in this study is compared with those of the conventional sorting method and the Monte Carlo method. The present method is comparable to the conventional methods in its accuracy, and is efficient in the sense of computational time when compared with the conventional sorting method. The Monte Carlo method, however, is more efficient than the other two methods if the number of branches and the number of fault segments increase significantly.

• Structural Engineering and Mechanics
• /
• v.83 no.5
• /
• pp.693-707
• /
• 2022

Bonded joints have proven their performance against conventional joining processes such as welding, riveting and bolting. The single-lap joint is the most widely used to characterize adhesive joints in tensile-shear loadings. However, the high stress concentrations in the adhesive joint due to the non-linearity of the applied loads generate a bending moment in the joint, resulting in high stresses at the adhesive edges. Geometric optimization of the bonded joint to reduce this high stress concentration prompted various researchers to perform geometric modifications of the adhesive and adherends at their free edges. Modifying both edges of the adhesive (spew) and the adherends (bevel) has proven to be an effective solution to reduce stresses at both edges and improve stress transfer at the inner part of the adhesive layer. The majority of research aimed at improving the geometry of the plate and adhesive edges has not considered the effect of temperature and water absorption in evaluating the strength of the joint. The objective of this work is to analyze, by the finite element method, the stress distribution in an adhesive joint between two 2024-T3 aluminum plates. The effects of the adhesive fillet and adherend bevel on the bonded joint stresses were taken into account. On the other hand, degradation of the mechanical properties of the adhesive following its exposure to moisture and temperature was found. The results clearly showed that the modification of the edges of the adhesive and of the bonding agent have an important role in the durability of the bond. Although the modification of the adhesive and bonding edges significantly improves the joint strength, the simultaneous exposure of the joint to temperature and moisture generates high stress concentrations in the adhesive joint that, in most cases, can easily reach the failure point of the material even at low applied stresses.