• Transactions of Materials Processing
• /
• v.31 no.5
• /
• pp.290-295
• /
• 2022

Recently, the use of high-tech ceramic parts in functional electronic parts, automobile parts and semiconductor equipment parts is increasing. These ceramics materials are required to have high reproducibility, reliability, large size and complex shapes. The researchers initiated the work to develop a new shaping method called gel casting, which allows high performance ceramic materials with a complex shape to be produced. The manufacturing process parameters of gel casting include uniform mixing of the initiator, bubble removal, and slip injection. In this study, we analyzed the dispersion and gelation characteristics according to the change in the additive content of the alumina slurry in the gel casting process. The alumina slurry for gel casting was prepared by mixing a solvent, a monomer and a dispersant through a ball mill. Alumina powder and a gelation initiator were added to the mixed solution, and ball milling was performed for 24 hours. A viscosity of 6,435 cps and a stable zeta potential value were obtained under the conditions of alumina powder content of 55 vol% and dispersant 2.0 wt%. After curing for 12 hours by adding aps 0.1wt%, TEMED 0.2wt%, and Monomer 3, 5wt%, it was possible to separate from the molding cup, confirming that the gelation was completed.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.7
• /
• pp.646-654
• /
• 2010

This paper describes an integrated chassis control for a maneuverability, a lateral stability and a rollover prevention of a vehicle by the using of the ESC and AFS. The integrated chassis control system consists of a supervisor, control algorithms and a coordinator. From the measured and estimation signals, the supervisor determines the vehicle driving situation about the lateral stability and rollover prevention. The control algorithms determine a desired yaw moment for lateral stability and a desired longitudinal force for the rollover prevention. In order to apply the control inputs, the coordinator determines a brake and active front steering inputs optimally based on the current status of the subject vehicle. To improve the reliability and to reduce the operating load of the proposed control algorithms, a multi-core ECU platform is used in this system. For the evaluation of this system, a closed loop simulations with driver-vehicle-controller system were conducted to investigate the performance of the proposed control strategy.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.619-622
• /
• 2009

P2P networks are undergoing rapid progress and inspiring numerous developments by gossip-based protocol. Gossip-based protocols for group communication have attractive scalability and reliability properties. We propose a self-organizing algorithm in the sense that the size of neighbor list achieved without any node knowing the group size. We also propose an efficient mechanism to reduce the redundancy of the system by backing up the nodes in the neighbor list. We present the design, theoretical analysis, and a detailed evaluation of the proposed algorithm and its refinements.

• ETRI Journal
• /
• v.45 no.3
• /
• pp.543-550
• /
• 2023

Electrostatic discharge (ESD) testing for human body model tests is an essential part of the reliability evaluation of electronic/electrical devices and components. However, global environmental concerns have called for the need to replace the mercury-wetted relay switches, which have been used in ESD testers. Therefore, herein, we propose an ESD tester using metal oxide semiconductor-controlled thyristor (MCT) devices with a significantly higher rising rate of anode current (di/dt) characteristics. These MCTs, which have a breakdown voltage beyond 3000 V, were developed through an in-house foundry. As a replacement for the existing mercury relays, the proposed ESD tester with the developed MCT satisfies all the requirements stipulated in the JS-001 standard for conditions at or below 2000 V. Moreover, unlike traditional relays, the proposed ESD tester does not generate resonance; therefore, no additional circuitry is required for resonant removal. To the best of our knowledge, the proposed ESD tester is the first study to meet the JS-001 specification by applying a new switch instead of an existing mercury-wetted relay.

• Journal of IKEEE
• /
• v.22 no.3
• /
• pp.733-737
• /
• 2018

In this paper, we describe the effects on the power system by adding renewable generator. In order to examine the stability of the system, the system analysis was performed using the PSS/E software. We confirmed whether occur the line overload of system through the load flow analysis and contingency analysis. and confirmed whether exceed of fault current using the fault current analysis. Dynamic stability of the system is analyzed through dynamic simulation. The analysis of the system according to the addition of the renewable generator was carried out according to the power system reliability and electricity quality maintenance standard.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.5
• /
• pp.935-944
• /
• 2023

In this study, the Inverse-type (: Inverse-Exponential, Inverse-Rayleigh) life distribution, which is known to be suitable for reliability research, was applied to a software development cost model based on finite failure NHPP(: Nonhomogeneous Poisson Process), and then the attributes that determine the model's performance were analyzed. Additionally, to evaluate the efficiency of the model, it was compared with the Goel-Okumoto basic model. The performance of the model was analyzed using failure time data, and MLE (: Maximum Likelihood Estimation) was applied to calculate the parameters. In conclusion, first, as a result of analyzing m(t), which determines the development cost, the Inverse-Exponential model was efficient due to its small error in the true value. Second, as a result of analyzing the release time along with the development cost, the Inverse-Rayleigh model was confirmed to be the best. Third, as a result of comprehensive evaluation of the attributes (m(t), cost, and release time) of the proposed model, the Inverse-Rayleigh model had the best performance. Therefore, if software developers can effectively utilize this research data in the early process, they will be able to proactively explore and analyze attributes that affect cost.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.11
• /
• pp.1349-1355
• /
• 2016

It should guarantee high reliability and ultra low latency communication. Additionally, it should support connection between massive devices. As one of estimated scenarios for 5G mobile communication, mobile devices and sensors using low data rate wireless communication will increase. For communication of these devices, single-carrier system can be considered. In order to satisfy these requirements, in this paper, we propose CDMA (Code Division Multiple Access) system using complex spreading and Multi-level BPSK(Binary Phase Shift Keying). The proposed system spread transmit symbol by using chip code consisted of real and imaginary number. As simulation results, we can confirm that although the proposed system has 3dB lower BER (Bit Error Rate) performance than conventional CDMA system, the proposed system can support 2 times more users in comparison with conventional CDMA system.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.5
• /
• pp.867-876
• /
• 2023

In this study, the attributes of the NHPP software development cost model applying the Gamma family distribution (Erlang, Log-Logistic, Rayleigh) were newly analyzed, and after comparing with the Goel-Okumoto basic model to verify the properties of the model, the optimal model was also presented based on this. To analyze software reliability, failure time data that occurred randomly during system operation was used, and the calculation of the parameters was solved using the maximum likelihood estimation. As a result of comprehensive evaluation through various attribute analysis (mean value function, development cost, optimal release time), it was confirmed that the Rayleigh model had the best performance. Through this study, the attributes of the software development cost model applying the Gamma family distribution, which has no previous research case, were newly identified. Also, basic design data could also be presented so that developers can efficiently utilize this research data at an early stage.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.6
• /
• pp.635-644
• /
• 2016

Train speed control is a vital part of train protection to build safe movement at an operation track. There is a special condition of track that needs more attention to protect the train, for example in slope area. Moreover, in developing country with vandalism problem, it requires to install minimalized equipment on the trackside. In addition, in tropical country, on tracksides it will be potentially pooling water that influences to the performance of trackside equipment. To address these problems, we propose the train speed control for slope area using infrared system. By installing on the pole configuration, the system offers a less challenging, economically sensible, minimalized installation of equipment on the trackside and reliability for heavy rain environment. This paper concentrates on the controlling train speed and measurement performance evaluation in slope area. The proposed train speed control system can monitor and control the speed in sloping area with maximum 3.6% and controlled speed about 20 km per h.

• Archives of Plastic Surgery
• /
• v.50 no.5
• /
• pp.452-462
• /
• 2023

This scoping review aimed to identify and categorize the available measurement options for vaginal laxity (VL), their indications of use, and whether these measurements can sufficiently provide objective clinical judgment for cases indicated for vaginal rejuvenation with many treatment options nowadays. Systematic searches were conducted on five electronic databases, manually searching articles' bibliographies and predetermined key journals with no date or study design limitations. We included all studies involving VL in their inclusion criteria, treatment indications, and outcome parameters. We used the Arksey and O'Malley frameworks as the guideline in writing this scoping review. Of the 9,464 articles identified, 66 articles and 11,258 subjects were included in the final analysis. The majority of studies were conducted in obstetrics and gynecology (73%), followed by plastic surgery (10%), medical rehabilitation (4.5%), dermatology (4.5%), and others (8%). Most studies originated from the North American region (30%). The following measurement tools were used: (1) interviews, (2) questionnaires, (3) physical/digital examinations, (4) perineometers, and (5) others. Our results suggested that subjective perception of laxity confirmed by directed interview or questionnaire is sufficient to confirm VL. Additional evaluation of pelvic floor muscle through digital examination or perineometer or other preferred tools and evaluation of sexual function through validated questionnaire (Female Sexual Function Index, Female Sexual Distress Scale-Revised, etc.) should follow to ensure holistic care to patients. Future research on the psychometric properties (reliability and validity) of commonly used measurements and the correlation in between subjective and objective measurements should be initiated before their clinical applications.