• Journal of radiological science and technology
• /
• v.41 no.5
• /
• pp.421-426
• /
• 2018

Unlike the traditional Radiological examinations, Magnetic Resonance Imaging (MRI) does not cause any harm and high levels of Radiation to the human body. Furthermore, MRI is widely used owing to its ability to adapt to different situations. However, the MRI equipment creates noises from its mechanical parts, and its magnetic bore structure can cause anxiety and claustrophobia in patients. To relieve claustrophobia, commercial refraction glasses were provided to the participants in this study, and the changes in anxiety and claustrophobia were measured. The participants were 30 volunteers with claustrophobia. To measure anxiety, the participants were asked to answer a Visual Analogue Scale (VAS) questionnaire. The physical markers of discomfort included perspiration on the forehead or hands (46.7%), mild frowning (30.3%), and leg shaking (40.1%). The subjective markers of discomfort included dizziness (2.85% in the men and 1.75% in the women). Although fear and anxiety levels were observed to be higher in the men, the difference was not significant. Hence, it was determined that both men and women felt discomfort (p >0.5). The fear coefficient was observed to decrease from 7.67 prior to wearing refraction glasses to 2.42 after wearing refraction glasses (p<0.000). In addition, use of refraction glass decreased MRI aversion from 1.97 to 1.03 (p<0.000). It can be inferred that refraction glasses are beneficial to patients undergoing MRI.

• Journal of the Ergonomics Society of Korea
• /
• v.35 no.2
• /
• pp.67-74
• /
• 2016

Objective: The aim of this study is to develop a farming shovel to reduce workload, which helps farmers lower the risk of musculoskeletal disease. Background: Most of work using farming tools including shovels requires repetitive works and awkward postures on body parts, and it could possibly cause work-related musculoskeletal disorders. It is necessary to develop and distribute farm equipment and tools in order to reduce physical workload. Method: To improve the most uncomfortable task perceived by ten farmers during the work with a shovel, the improved shovel was designed and made as a prototype for experiment for the comparison of the existing and improved shovels. Twenty males were recruited for this experiment, and muscle activity (%MVC) of six body parts and subjective discomfort ratings by body parts while working with a shovel were measured. A paired t-test was performed to compare physical workload between the existing shovel and the developed one. Results: A shovel applying foothold tied between shaft and blade was designed, which can help workers reduce repetitive bending of back and pressures for upper limbs while digging soil. According to compared evaluation of the developed shovel and the existing shovel, the developed shovel's %MVCs in all experimental muscles were significantly lower than those of the existing shovel. The developed shovel showed the biggest drop in perceived subjective discomfort rating of back, followed by arm and neck, compared to the existing shovel. Conclusion: It was confirmed that attaching a foothold to a shovel was an effective way of reducing workload in back and upper limbs during digging. Application: In the near future, if we put the prototype of developed shovel to practical use after making up for defects, it will help farm work environment be healthier and safer.

• Physical Therapy Rehabilitation Science
• /
• v.12 no.3
• /
• pp.229-239
• /
• 2023

Objective: Patients with chronic obstructive pulmonary disease (COPD) may experience reduced physical activity and quality of life (QoL) due to decreased pulmonary function. The purpose of this study was to investigate the level of pulmonary function, physical activity, and QoL of COPD patients. Design: Cross-sectional observational study. Methods: This study examined the published data of the Korea National Health and Nutrition Examination Survey in 2015-2019. Among 39,759 subjects who participated for 5 years, data from 151 patients diagnosed with COPD were analyzed separately. For the pulmonary function, the results of forced vital capacity (FVC), forced expiratory volume in 1 second (FEV1), FEV6, forced expiratory flow 25-75%, and peak expiratory flow were observed. Physical activity was identified as frequency and duration. For the QoL, EQ-5D-3L evaluation results were examined, and the frequency and index of the Korean version were investigated. Results: In pulmonary function, all variables were found to be lower than age and weighted matched normal values. COPD patients showed to perform very low levels of high/medium physical activity and sitting time was confirmed to be more than 8 hours a day. In QoL, it was found that the highest reporting rate of some problems was the "pain and discomfort" and "mobility". Conclusions: It was found that COPD patients showed that the prevalence of circulatory disease was relatively high, lowered pulmonary function, and QoL. These can be improved through regular physical activity, and it is thought that this can be achieved through optimization of pulmonary rehabilitation.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.2
• /
• pp.179-193
• /
• 2012

The development of modern transportation technology has required many people in spaces (such as vehicle seats, airports, and train stations) for long periods. The public seats provided in these places are manufactured in a standard size; however, fatigue sets in if the seats are unsuitable for the person's physical size. For this reason, this study developed an air cushion vest that would enhance the comfort of vehicle seats. Passengers in vehicles, trains, airplanes, and buses were observed and surveyed to understand the demand for seat comfort. Our analysis found that the greatest source of discomfort was involuntary nodding of the head while asleep and discomfort around the waist area. For this reason, the air cushion vest was designed to support the head and the waist. The neck cushion of this vest was designed to strengthen head support to counter forward nodding because existing commercial neck cushions had no support for forward nodding. For the waist cushion, at lumbar and below-lumbar parts were chosen as the key parts to be supported, the cushion was designed to contain air at those parts. To cover the embedded waist cushion, the vest was designed to be long. The closure was constructed with zippers from the neck to waistline, and with invisible snaps from the waistline to the hemline so that the wearer could open them easily while seated. A subjective comfort evaluation was conducted to verify the effectiveness of the developed vest. In the test, the developed cushions received a better evaluation than cushions currently available on the market. The volume of the vest could be adjusted by the inflow and outflow of air. It was proven that the vest was effective in terms of comfort and portability. This shows that the developed vest could enhance passenger comfort while sitting on vehicle seats.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2000.04a
• /
• pp.230-234
• /
• 2000

Thermal comfort by wearing clothes is the important element which gives influence to a clothing comfort. The thermal comfort of clothes have been evaluated by sensory test and physical property of clothes material. To evaluate a thermophysiological comfort. a new evaluation method which measures the physiological response such as electroencephalogram(EEG) is attracting the attention of many people. In the chilly environment, the EEGs in t재 kinds of thermal conditions : with and without clothes were measured. By utilizing the chaos analysis, the behavior of the obtained EEGs were quantiatively expressed in the correlation dimension. As a result, the correlation dimension of the EEGs in being thermal comfortable feeling by putting on clothes, was bigger than the correlation dimension of the EEGs in being cold and discomfort. These results suggest that chaotic analysis of EEG is effective to the quantitative evaluation of thermal esthesis.

• KIEAE Journal
• /
• v.10 no.4
• /
• pp.3-8
• /
• 2010

Recently, various daylight evaluation methods for visual environment have been developed; simulation analysis methods, numerical calculation, and data monitoring methods. However, it is impossible for simulation analysis to make real scenes and visualize real images exactly. Also, a numerical calculation is considered as an out of date and time-consuming mean. Therefore, for acquisition of accurate results, many studies often use the monitoring data methods. Especially, most studies regarding discomfort glare are evaluated by measuring the physical quantity of luminance through traditional measuring Minolta Luminance meters as an instrument. But, this method has a difficulty in measuring several points at the same time because of the limitation of spaces and time when mapping. So, this study focused on the potential usefulness of High Dynamic Range photography technique as a luminance mapping tool. In order to evaluate the accuracy of proposed programs such as webHDR, Photomatix and PHOTOLUX, this paper has conducted an experiment by using Canon EOS 5D and NICON Coolpix8400 digital camera.

• Journal of the Ergonomics Society of Korea
• /
• v.12 no.1
• /
• pp.3-15
• /
• 1993

The pressure distribution between human body and seat surface has been considered as an important factor affecting seating comfort. However, it is rare to find general guidelines of how to analyze these pressure patterms related to the seating comfort. In order to investigate the relationship between the pressure patterns and the subjective feeling of seating comfort, a high-resolution body pressure measurement system was adopted. The measured patterns showed that the clear distinctions between the comfortable seats. It was also possible to estimate the seating comfort based upon the analysis of the pressure patterns. The further research will be focused on finding out the relationship between physical seat design parameters and the seating discomfort.

• Journal of Korean Neurosurgical Society
• /
• v.38 no.1
• /
• pp.61-64
• /
• 2005

We report a 18-year-old man, who has been taking antihypertensive medication for 1month in a local clinic, presented with a sudden onset headache followed by left blindness. He experienced palpitation and chest discomfort during physical exertion since 2years before admission, but unfortunately has been ignored. Brain CT showed intracerebral hemorrhage in the left temporoparietal area, but cerebral angiogram and magnetic resonance image revealed no vascular anomaly. He was managed conservatively, and headache and visual loss were improved over time. Subsequently, on the evaluation of hypertension, he was diagnosed as having extra-adrenal pheochromocytoma on left paraaortic area from the results of endocrinological evaluations, abdominal CT scan, and $^{131}I$-MIBG scintigraphy.

• The Journal of Korean Society for Radiation Therapy
• /
• v.33
• /
• pp.15-24
• /
• 2021

This study is about the introduction and usefulness evaluation of the manufacturing method of the bolus-helmet. Helmet-production for the treatment of scalp tumor patients has been tried and will continue in many creative and various ways. However, Most of the research data did not significantly reduce the psychological burden and physical and physical discomfort that the patient had to bear due to the time and economic cost required for the production of the helmet, the convenience of production, and the complexity of the process. In addition, recently, studies using more advanced technologies and equipment such as 3D-printer technology, which are being studied as a way to increase the treatment effect, are being introduced, but the time, economic cost, and psychological and physical burden are still the sole responsibility of the patient. Isn't it getting worse? The reality is that the thoughts of concern cannot be erased. Therefore, by maintaining the physical properties of the bolus and manufacturing a helmet without incurring additional costs, the physical and physical discomfort aggravated to the patient was reduced and the procedure and time for helmet manufacturing were minimized. In this way, it was possible to reduce the time, economic cost, and physical discomfort required for the production of the helmet, and it was also possible to minimize the psychological burden of the patient, although it is invisible. Additionally, in evaluating the usefulness of helmets, we are able to continuously seek and develop ways to reduce the air-gap interval, and as a result, we will be able to introduce a method to keep it within 2.0mm along with the manufacturing method through this study. I feel very welcome. Finally, I hope that anyone working in the Department of Radiation Oncology will be able to easily manufacture the helmet required for radiation therapy using a bolus through the guide-line on helmet manufacturing provided by this institute. I hope and hope that if you have any questions or inquiries that arise during the production process, please feel free to contact us through the researcher's e-mail or mobile phone at any time.

• Journal of the Ergonomics Society of Korea
• /
• v.34 no.6
• /
• pp.549-561
• /
• 2015

Objective: The purpose of this study was to investigate the job stress factors of mobile communication network construction workers using survey based on 'Job stress factors evaluation tool for Koreans' that was developed by KOSHA in 2003. Background: Due to the rapid growth of penetration rate of smartphone, the necessity of LTE service changing from 3G network was brought up. The demand of LTE network construction in a short period of time leads to the aggravation of the job stress of mobile communication network construction workers. Method: Two hundred and fifty workers who were in the mobile communication network industry participated in this study, and among them 206 responses were analyzed for this study due to the unreliability and insincerity of responses. The eight job stress factors which are physical environment, job demand, job autonomy, relation conflict, job instability, organizational system, inadequate compensation, workplace culture were analyzed. Results: The job stress factors of mobile communication network construction workers were compared to those of other industry workers, and other work related characteristics were analyzed. The results showed that the stress level of a physical environment and job requirement were relatively higher than those of manufacturing industry workers, meaning that mobile communication network construction workers have rough working conditions and increased amount of work due to the demand of LTE network construction. The stress level of physical environment for outdoor job workers was relatively higher than that of indoor job workers. With the analytical result for level of job satisfaction, significant difference was observed (p <0.05) with every factor, and the job stress was found the highest with those not satisfied with every factor Conclusion: From the results of this study, the work loss due to the job stress could be prevented, and accurate stress factors could be removed at the workplace. Application: The results of this study may not represent the whole mobile network construction workers, the effort for job stress management is needed to improve the work efficiency and the workers' quality of life.