• 보건행정학회지
• /
• 제13권3호
• /
• pp.35-51
• /
• 2003

This study purports to develop a quality assessment tool for the process of health promotion programs at public health centers(PHC). The draft of the assessment tool developed by the literature was distributed to 242 staffs who were in charge of the health promotion programs at PHCs for evaluating the feasibility of the tool on September and October 2002. The major results of the study were as follows; The quality assessment tool developed in the study consisted of four domains: strategic planning, program management, monitoring and evaluation, and resources and information. The strategic planning dealt with the function of the planning staff and committees, community data analysis, the feasibility of the program, and the approach methods for attaining the goal of the program. The program management included the items on the qualification and power of the program staff. The monitoring and evaluation included the items on the reporting and communication among program units, and feed back after monitoring. Finally, the resources and information dealt with community networking, clients' response, and consulting activity of the staff. The validity of the tools was tested and partly supported by both formative and criterion-related methods. The assessment tools developed in this study could be used by health promotion workers in the self-evaluation of the program quality. In conclusion, the quality assessment tool developed in the study will be a good safeguard for assuring the quality of the process of health promotion programs.

• 한국통신학회논문지
• /
• 제38C권4호
• /
• pp.335-343
• /
• 2013

SW 개발단계에서 사이버침해사고의 주요 원인인 SW 보안약점을 진단하여 제거하면 사이버침해사고를 효과적으로 예방할 수 있다. 국내의 경우, SW 개발보안 적용이 의무화되어 SW 보안약점을 제거하는 것이 필수사항이 되었다. 효과적으로 SW 보안약점을 진단하여 제거하기 위해서는 신뢰된 SW 보안약점 진단도구의 도움이 필요하다. 따라서, 본 논문은 국내환경에 적합한 진단도구 기능 요구사항과 진단도구의 신뢰성을 보증할 수 있는 평가방법론을 제안한다. 그리고, 제안된 평가체계의 효과를 분석하기 위한 시범 적용한 결과 및 절차를 제시한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전력기술부문
• /
• pp.125-128
• /
• 2005

This paper illustrates potential applications of POM/OPM/BOR, which are used for deterministic reliability evaluation in the operation mode (operational planning and operating) in Korea Power System. Deterministic reliability evaluation in this paper bases the philosophy of the marginality and the limitation of physical quantity (voltage and thermal in main) under contingency analysis. The POM/OPM/BOR tools have been developed by V&R (Vaimann and Research) in USA. Before case studies, main frame and feature of the tools are introduced in brief. Case studies of the actual power system of Korea are demonstrated for checking the application possibility of POM/OPM/BOR.

• Asia pacific journal of information systems
• /
• 제12권3호
• /
• pp.1-20
• /
• 2002

For the last decade, some leading groups of corporations in Korea have integrated and managed their Information Systems(IS) functions. Each group established a separate System Management(SM) company to manage the IS and tried to get a synergy effect from the integration. These attempts, however, were not initiated by any one company. Rather they were group efforts. Moreover, the previous measuring tools evaluated IS with the scope of technical performance or quantitative user satisfaction using an absolute scale. Obscure criteria were used in an attempt to present improvements in IS function which were qualitatively weak. This study evaluates whether integration has been efficient and successful. For this purpose, we evaluate the performance efficiency of IS functions with Data Envelopment Analysis(DEA) methodology. In comparison with prior methods, DEA presents the rate of relative efficiency, the efficiency frontier for improving inefficiency, the degree of improvement(slack), and the guideline to construct any benchmark(reference set). For our DEA evaluation, this study selected a leading group of 23 companies in Korea. Our experimental results are as follows. First, efficiency was rated low on average. It also demonstrates that the motivation of performance efficiency of IS functions is deficient. Second, the result of the test to find the existence of economy of scale and scope shows that the growth of an organization and industrial characteristics do not affect IS performance efficiency from the perspective of user satisfaction. Finally, the comparison with other evaluation approaches informs us that DEA can be a complementary evaluation method which supports other measuring tools.

• 한국생산제조학회지
• /
• 제19권4호
• /
• pp.521-528
• /
• 2010

A product system will be improved continually until requirements are satisfied. It is true that considering alternative designs to improve product system is hard work; it is also true that selecting an adequate design idea that represents the needs of stakeholders concerned and meets effectiveness factors properly is not an easy work, either. In the process of driv-ing an idea and designing, which is called Design Phase, there are lots of existing tools for testing the driven idea in DFSS. But, those kinds of tools do not offer the function that helps to select the technically better design idea among alternative design ideas that have the same evaluation level. Moreover it is inappropriate to select adequate alternative design ideas by just verifying only the evaluation table in pugh matrix, since satisfied deviation val-ues are low when there is a too competitive mass product system in a market. Also, for the IT product with short life cycle, faster and more effective testing tool is needed. Therefore, the 'roduct quality index' is suggested in order to select an appropriate candidate design concept for system development that meets requirements by using 'deality concept' pro-vided by TRIZ. According to the result of this research, it is possible to select technically better idea fast and effectively; it is confirmed by applying the approach to the case of LCD BLU (Back Light Unit).

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 추계학술대회
• /
• pp.669-671
• /
• 2011

소프트웨어 개발 프로젝트에서는 다양한 개발 방법론을 적용해서 소프트웨어가 개발되고 있으며, 최종 목표 소프트웨어 및 시스템에 따라 최적의 개발방법론이 적용한다. 개발프로세스 단계에 따라 모듈을 개발하며 최종적으로 통합 단계에서 하나의 소프트웨어로 통합하고 있다. 하지만 프로젝트가 복잡하고 모듈별 의존도가 높을 경우 각 모듈 별로 개발된 코드는 많은 요구사항의 변경, 형상관리 미흡 및 표준 미 준수 등으로 모듈 통합이 완벽하게 진행되지 않고 있으며 그로인해 프로젝트 기간안에 완료하지 못하는 상황이 빈번하게 발생한다. 통합이 완료되지 못하면 소프트웨어 품질은 낮아 지고 프로젝트 비용 및 시간은 늘어나 결국 프로젝트가 실패 할 가능성이 높아진다. 각 모듈의 통합을 예측 가능하고 성공적으로 하기 위해 지속적인 통합 시스템을 구축하여 프로젝트에 적극적으로 적용하고, 공개소프트웨어 도구를 활용하여 자동화 시스템을 구축해야 한다. 국내에서는 지속적인 통합방법의 중요성을 인식하고 있지만 프로젝트 비용. 시간, 인식부족 및 도구의 부재 등으로 인해 소프트웨어 프로젝트에 활용되고 있지 않은 실정이다. 이에 본고에서는 공개소프트웨어 도구를 이용하여 지속적인 통합 환경을 구축하고 소프트웨어 품질개선에 활용할 수 있는 테스트 방안을 제안한다.

• Genomics & Informatics
• /
• 제18권2호
• /
• pp.24.1-24.7
• /
• 2020

Despite a growing number of natural language processing shared-tasks dedicated to the use of Twitter data, there is currently no ad-hoc annotation tool for the purpose. During the 6th edition of Biomedical Linked Annotation Hackathon (BLAH), after a short review of 19 generic annotation tools, we adapted GATE and TextAE for annotating Twitter timelines. Although none of the tools reviewed allow the annotation of all information inherent of Twitter timelines, a few may be suitable provided the willingness by annotators to compromise on some functionality.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.1022-1027
• /
• 1995

We present a framework of an intelligent design support system for embodiment design of machine tools which can support efficiently and systematically the machine design by utilizing design knowledge such as objects(part), know-how, public, evaluation, and procedures. The design knowledge of machining center has been accumulated through interview with design experts of machine tool companies. The processes of embodiment design of machining center are established. We also introduce a hybrid knowledge representation so that the systm can easily deal with various and complicated design knowledge. The intelligent design system is being developed on the basis of object-oriented programming, and all parts of a design object, machining center, are also classified by the object-oriented modeling. For the demonstration of effectiveness of the suggested system, a structural design system for machine tools is implemented.

• 대한인간공학회지
• /
• 제24권4호
• /
• pp.79-83
• /
• 2005

Efforts to identify jobs or tasks having known risk factors for work-related musculoskeletal disorder can provide the groundwork for changes aimed at risk reduction. An effective identification method is the ergonomic job hazard analysis which breaks a job into its various elements or actions, describes them, measures and quantifies the ergonomics risk factors. Some analytical methods including OWAS, RULA, REBA, and NLE have been used as tools in quantifying the risk factors. But these traditional methods using worksheet or paper are difficult to explain to participants for performing the job hazard analysis in the field, and take a long time. We develop some software tools to implement the analytical methods using EXCEL programs or computer program. These tools developed in this study are faster and easier to perform the ergonomic job analysis than the traditional methods using worksheet.

• 한국정밀공학회지
• /
• 제24권2호
• /
• pp.33-40
• /
• 2007

In this study, presintered and full sintered low purity alumina ceramics were machined with various tools to clarify the effect of cutting fluid in machinability. The main conclusions obtained were as follows. When the presintered ceramics were wet machined with sintered diamond tool, the tool wear becomes extremely large, and higher cutting speed can be used than in the case of full sintered ceramics. The productivity of wet cutting with the sintered diamond tool is much higher than that of dry cutting. In the case of the CBN and ceramic tools, the tool wear were smaller at wet cutting than at dry cutting, especially exhibiting considerably larger grooved tool wear in wet cutting with ceramic tool.