• 한국철도학회논문집
• /
• 제14권6호
• /
• pp.507-514
• /
• 2011

최근 국내 협력 업체와 함께 국산 전동차를 제작하였다. 전동차에서 주 제어장치는 열차종합제어장치인 TCMS로서 시스템 성능, 편리한 유지 관리 그리고 서비스 관점의 유연성을 고려하면서 TCMS의 요구분석을 수행하였다. 이를 기반으로 새로운 내부 버스 구조와 RTOS로서 QNX를 적용하게 되었다. TCMS 기능을 서비스 장치와 제어/감시 기능으로 분리하여 열차의 성능 개선과 편리한 유지 보수 그리고 고객 요구를 만족하였다. TCMS는 하드웨어에 구현된 다양한 프로토콜을 통하여 열차에 장착된 제어 장치를 제어하고 관리한다. 시스템의 성능 검증과 안정성을 확인하기 위하여 EMC/EMI를 비롯한 다양한 시험을 KOLAS 인증 기관과 한국철도기술연구원에서 시행하였다. 현재 TCMS는 새로 개발된 열차에 장착되어서 시운전을 통하여 성능 검증을 수행하고 있다.

• Corrosion Science and Technology
• /
• 제3권5호
• /
• pp.216-221
• /
• 2004

The operating experience showed that the fatigue is one of the major piping failure mechanisms in nuclear power plants (NPPs). The pressure and/or temperature loading transients, the vibration, and the mechanical cyclic loading during the plant operation may induce the fatigue failure in the nuclear piping. Recently, many fatigue piping failure occurred at the socket weld area have been widely reported. Many failure cases showed that the gap requirement between the pipe and fitting in the socket weld was not satisfied though the ASME Code Sec. III requires 1/16 inch gap in the socket weld. The ASME Code OM also limits the vibration level of the piping system, but some failure cases showed the limitation was not satisfied during the plant operation. In this paper, the fatigue behavior of the socket weld in the nuclear piping was estimated by using the three dimensional finite element method. The results are as follows. (1) The socket weld is susceptible to the vibration if the vibration levels exceed the requirement in the ASME Code OM. (2) The effect of the pressure or temperature transient load on the socket weld in NPPs is not significant because of the very low frequency of the transient during the plant lifetime operation. (3) 'No gap' is very risky to the socket weld integrity for the specific systems having the vibration condition to exceed the requirement in the ASME OM Code and/or the transient loading condition. (4) The reduction of the weld leg size from $1.09*t_1$ to $0.75*t_1$ can affect severely on the socket weld integrity.

• The Korean Journal of Pain
• /
• 제24권1호
• /
• pp.7-12
• /
• 2011

Background: Adenosine has been shown to have a wide spectrum of unique pain-relieving effects in various clinical situations. The aim of this study was to investigate the effects of intraoperative adenosine infusion on acute opioid tolerance and opioid induced hyperalgesia induced by remifentanil in adult patients undergoing tonsillectomy. Methods: For this study, ninety patients were randomly allocated into groups that receive either adenosine (adenosine group) or saline (remifentnail group) intravenously under remifentanil based anesthesia and saline (sevoflurane group) under sevoflurane anesthesia. The patients in adenosine group received adenosine at dose of $80\;{\mu}g$/kg/min, and those in remifentnail group and sevoflurane group received an equal volume of saline 10 minutes after the induction of anesthesia until the end of surgery. Intraoperative evaluation included time weighted mean remifentanil dose, and postoperative evaluations included degree of pain severity at 1, 6, 12, and 24 hours, time to first postoperative requirement, and analgesic dose required during 24 hours after operation. Results: Time weighted mean remifentanil dose during intraoperative period in adenosine group was significantly lower than that of remifentnail group (P = 0.00). The first postoperative analgesic were required earlier in remifentanil group than sevoflurane group or adenosine group (P = 0.00). Pethidine requirement during 24 hours in sevoflurane group and adenosine group was significantly lower than that of remifentnail group (P = 0.00). The visual analog scale scores for pain in sevoflurane group and adenosine group were significantly lower than those of remifentnail group for 12 hours after operation (P = 0.00). Incidence of hypotension (P = 0.024) and number of ephedrine administered (P = 0.011) in adenosine group were significantly higher than those of sevoflurane group. Conclusions: The above results suggest that intraoperative adenosine infusion prevent acute opioid tolerance and opioid induced hyperalgesia induced by remifentanil.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제6권8호
• /
• pp.391-400
• /
• 2017

소프트웨어 아키텍처는 비기능적 요구사항(Non-Functional Requirement, NFR), 즉 품질 요구사항과 제약사항을 만족시키는데 중요한 역할을 한다. 현재까지 진행된 대부부의 연구는 전형적인 NFR을 위한 아키텍처 설계 방법과 설계 택틱에 국한된다. 그러나, 목표 시스템에 특화된 비전형적인 NFR을 위한 설계 방법에 대한 연구는 많이 진행되고 있지 않고, 소프트웨어 아키텍트가 보유한 지식과 경험에 의해 비전형적인 NFR을 만족시킬 수 있는 효과적인 방법과 택틱을 유도하고 이를 기반으로 아키텍처를 설계한다. 그러므로, 비전형적인 NFR을 고려하여 아키텍처를 설계하는 효과적인 방법 및 택틱을 고안하는 것이 어렵다. 본 논문에서는 비전형적인 NFR을 만족시키는 소프트웨어 아키텍처를 설계하는 효과적이며 체계적인 아키텍처 설계 방법론을 제안한다. 이 방법론은 전형적인 NFR을 고려한 아키텍처 설계에도 적용될 수 있다. 제안된 방법론은 5개의 스텝으로 구성된 프로세스, 각 스텝에 대한 상세 활동 지침을 포함한다. 그리고, 제안된 프로세스가 잘 설계되었음을 보이기 위해, 산출물 간의 추적성 관계를 확인한다. 마지막으로, 제안된 방법론의 효율성과 실용성을 평가하기 위해 사례 연구를 수행한 결과를 제시한다.

• 농촌계획
• /
• 제26권3호
• /
• pp.91-102
• /
• 2020

The purpose of study was analyze the pumping characteristics, Irrigation Efficiency(IE), and irrigation pattern by period of rice growing stage with based on the performance of design irrigation water requirement and operational Galshin Pumping(GP) station in GP irrigation district constructed under rural water development project master plan. GP station was located in Yedang reservoir, Yesan-gun, Chungcheongnam-do and has been supplying irrigation water since 2006. The research data are the Irrigation Water Requirement(IWR) and the Pumping Water Amount(PWA) from 2006 to 2015 at the GP station, which is the supplied amount. The IWR were calculated using the Blaney-Criddle formula of the HOMWRS program, Hydrological Operation Model for Water Resource System, developed by Korea Rural Community Corporation. The Blaney-Criddle formula was used to calculate design irrigation water requirement of Galshin rural water development project master plan. During 2006-2015, the study period, the annual average IWR is 763.2(±149.1)mm, the annual PWA of the GP station is 397.4mm to 1,056.9mm, and those average annual PWA is 643.4(±208.4)mm. The annual IE of GP station 96.5% to 169.0%, and the average annual IE is 124.3%, which is higher than the research results conducted in other pumping stations. Analyzing the irrigation patterns of the GP irrigation district, the IWR Ratio per 10days(IWRR) and the PWA Ratio per 10days(PWAR) of the G P station were obtained. The IWRR is the percentage of IWR for each 10 days of a month to total IWR per year, and the PWAR is the percentage of PWA for each 10 days of a month to total PWA per year. The Kolmogorov- Smirnov(K-S) test results of IWRR and PWAR showed the characteristics classification by rice growing stage and stable normal distribution characteristics. Average IWRR(AIWRR) and Average PWAR(APWAR) are presented as irrigation patterns. Irrigation pattern analysis will be able to standardize comparison, analysis and probability calculation of the pumping station characteristics of different pumping stations and apply to objective evaluation of the pumping station district.

• 한국농공학회논문집
• /
• 제61권5호
• /
• pp.1-10
• /
• 2019

Due to the climate change the drought had been occurring more frequently in recent two decades as compared to the previous years. The change in the pattern and frequency of the rainfall have a direct effect on the farming sector; therefore, the quantitative estimation of water supply is necessary for efficient agricultural water reservoir management. In past researches, there had been several studies conducted in estimation and evaluation of water supply based on the irrigational water requirement. However, some researches had shown significant differences between the theoretical and observed data based on this requirement. Thus, this study aims to propose an approach in estimating reservoir rate based on empirical method that utilized observed reservoir rate data. The result of these two methods in comparison with the previous one is seen to be more fitted for both R2 and RMSE with the observed reservoir rate. Among these procedures, the method that considers the drought year data shows more fitted outcomes. In addition, this new method was verified using 15-year (2002 to 2006) linear regression equation and then compare the preceeding 3-year (1999 to 2001) data to the theoretical method. The result using linear regression equation is also perceived to be more closely fitted to the observed reservoir rate data than the one based on theoretical irrigation water requirement. The new method developed in this research can therefore be used to provide more suitable supply data, and can contribute to effectively managing the reservoir operation in the country.

• 분석과학
• /
• 제37권2호
• /
• pp.79-86
• /
• 2024

Among the nutrients in feed, amino acids and minerals are important for the growth and development of pets. In particular, interest in nutritional components related to the health of pets is increasing as pet-raising households and pet food markets have recently grown. Therefore, in this study, 55 pet food products distributed in South Korea were purchased, and the content of 3 essential and conditionally essential amino acids (taurine, lysine, arginine) and 4 minerals (Ca, P, Na, K) was investigated. Among the three amino acids, arginine was found to have the highest content, and the average content was 1.79 and 1.37 % in cat and dog foods, respectively. On the other hand, the taurine content was the lowest, but it was found to be higher than the minimum requirement of 0.10 % for cats set by the American Association for Feed Control (AAFCO) and the European Federation of Pet Food Industries (FEDIAF). As a result of the four-component analysis of minerals, the content of Ca was found to be the highest, and the average content was confirmed to be 1.64 and 1.25 % in cat and dog food, respectively. On the other hand, Na was the lowest, but it was higher than the AAFCO minimum requirement and FEDIAF minimum requirement for young cat and dog food. Among all 55 samples examined, the content of the three amino acids and the four inorganic components was confirmed to be suitable for the recommended minimum intake and maximum allowable intake presented by AAFCO and FEDIAF.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 Ⅲ
• /
• pp.1621-1624
• /
• 2003

As the entities participating Grid become larger, performance requirement for the LDAP-based GIS(Grid Information Service) goes beyond that provided by a stand-alone single LDAP server. This entails the exploration of distributed LDAP systems. This paper presents the performance evaluation respectively for a distribution-based and a replication-based LDAP model. The analysis is based on an analytic performance model for each distributed system which is obtained by applying the M/M/1 queuing model. The performance evaluation made to these analytic models reveals that the distribution-based and the replication-based model show a significant tradeoff in their performance with respect to the system size as well as the amount of system load.

• 환경영향평가
• /
• 제2권2호
• /
• pp.55-58
• /
• 1993

After establishing the EIA(Environmental Impact Assessment) act in the Federal Republic of Germany there still remain methodical and substantial deficits. So nearly every environmental impact study went to be a matter of experiments. The requirement for standardization of data sampling and evaluation has permanently been increasing. This is meant to ensure quality standards for the assessment of environmental impacts as well as to maintain reliability required by the projecting company. Such a harmonization is of special importance because of the strongly accelerated expansion of traffic infrastructure caused by the reunification of Germany. That is why the guideline "EIA carried out" for the German Railways company is in process of development This guideline, focussing on practical demands, comprises impacts of railways, adequate sets of indicators, feasible tools for the prognosis and evaluation of environmental reactions. "EIA carried out" will be introduced not only as a manual but also through workshops and pilot studies.

• 한국소음진동공학회논문집
• /
• 제24권2호
• /
• pp.102-107
• /
• 2014

The engine excitation forces are considered as major vibration source for the forklift truck, especially in small class. Even though the current engine mounting system designs are acceptable for vibration isolation, the performance of the engine mounting system is still required for the tendency of light weight, higher power and driver's higher vibration requirement. In this paper vibration reduction technique of forklift engine which is supported on rubber mounts is presented. Based on the dynamic model of resilient engine mounting system, design evaluation program is established. The design optimization technique and evaluation method of system properties are discussed. Effects of optimal design are validated through comparison with test results.