• 한국한의학연구원논문집
• /
• 제14권3호
• /
• pp.97-102
• /
• 2008

The tongue diagnosis is a diagnostic method in the oriental medicine that uses shape, substance, coating, and movement of the tongue to determine the condition of health and disease characteristics in human. Since this information, however, could be affected by subjective sense and visual information, it is difficult to obtain the objective and reproducible results. This research aims at building a reproducible tongue diagnosis system using color chart that is attached close to the face contact region. The picture of color chart is taken simultaneously with a tongue and applied to color revision. The system, in addition, is focused on providing a clear tongue image through securing a sufficient photographing distance with a surface coating mirror. The lightning part which can suppress the reflection by sputum in maximum is implemented for the objectification and quantification of the tongue diagnosis system. The face contact region is designed for consideration of a testee's convenience. To evaluate the reproducibility of the system, the CVs (coefficient of variance, %) of $L{\ast}$, $a{\ast}$ and $b{\ast}$ of red, green and blue regions in color chart are calculated, respectively. The results of all CVs shows that the tongue diagnosis system is re liable and those consequences contribute to the objectification and quantification of the tongue diagnosis system.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.455-458
• /
• 1999

It has been known that buildings having inappropriate expansion joints in their spacings may be subject to exterior damages due to extensive cracks on the outer walls under service loads, and structural damages due to excessive moment induced by temperature changes at ultimate load conditions. Rather inconsistent code provisions are available regarding spacings of expansion joints from different foreign structural codes and even worse, no quantiative measure on spacings is given in our codes for building structures. In order to establish a rational measure on the spacing of expansion joints, theoretical approaches are taken in this study. The developed theoretical formula is, then, converted to design chart for structural designer's convenience in its use. The chart considers both service and ultimate load stages.

• 태양에너지
• /
• 제12권1호
• /
• pp.34-39
• /
• 1992

본 연구에서는 f-chart method를 이용하여 대전지방에서 공기식 시스템을 적용하였을 경우의 난방효과에 대한 성능 분석을 수행하였다. 공기의 유량, 집열판 덮개의 수, 페블 베드의 축열 용량 그리고 집열판의 코팅 등에 따른 공기식 시스템의 난방 효과를 분석하였으며 아울러 액체식 시스템을 이용한 난방 시스템과도 동일 조건하에서 그 성능을 비교 분석하였다.

• Nuclear Engineering and Technology
• /
• 제11권3호
• /
• pp.195-202
• /
• 1979

In this paper, a cause-consequence chart is applied to evaluate the probability that the containment spray system in a nuclear power plant may not be woring properly, given a demand for spryaing at loss of coolant accident (LOCA). It is shown how the diagram provides a basis for calculating two probability measures for malfunctioning of this system, in case the test policy of the system is taken into account, i.e., average probability that the containment spray cannot be established, and average probability that the containment spray is established : spray stops before the required operating time is over.

• 품질경영학회지
• /
• 제38권3호
• /
• pp.354-362
• /
• 2010

This paper presents a non-linear control chart based on support vector machine regression (SVM-R) to improve the accuracy of fault detection of cyclic signals. The proposed algorithm consists of the following two steps. First, the center line of the control chart is constructed by using SVM-R. Second, we calculate control limits by variances that are estimated by perpendicular and normal line of the center line. For performance evaluation, we apply proposed algorithm to the industrial data of the chemical vapor deposition process which is one of the semiconductor processes. The proposed method has better fault detection performance than other existing method

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.863-874
• /
• 2009

The engineering characteristics and the reinforcement effect of the elephant foot method were discussed with parametric study. The elephant foot method is adopted to support the loads transferred from tunnel crown and improve bearing capacity of elephant foot in poor ground condition. The evaluation of reinforcement effect, which has the mechanical relationship between ground condition, footing size and reinforcement system, was carried out through the previous research and numerical analysis. In addition, the simple design chart was proposed to estimate the applicability of the elephant foot reinforcement method. It will be practical for the engineer to determine the optimum reinforcement method for safe tunnelling in soft ground condition.

• 대한안전경영과학회지
• /
• 제4권3호
• /
• pp.157-166
• /
• 2002

With the introduction of the Internet in the 21st century, the manufacturing-oriented industry, so called EMS(Electronic Manufacturing Service) specialized in manufacturing only, is rapidly expanding. From the beginning of the year 2000, the EMS industry in advanced countries around the world, whereas a strong Motivation System in which a manufacturing related staff plays a main role, has began providing the source of competitiveness. And this industry is regarded as a core of management linking productivity directly to management performance. Thus, all the manufacturing sectors including not only the electronic industry but also mechanical industry in the future are observed to be divided into two industries; a Maker strategy industry focused on marketing and development, and a EMS industry specialized in manufacturing. Therefore, we need to evaluate whether the industries should continue to support the Manufacturers Strategy or attempt to change into the EMS industry However, with no approved evaluation standard on hand as to an actual EMS industry, in this thesis, we develop the EM(EMS-Maker) Chart in order to analyze both the Manufacturer Strategy and the EMS industries.

• 상하수도학회지
• /
• 제23권4호
• /
• pp.417-430
• /
• 2009

A BNR comprehensive performance evaluation (BNR CPE) system was established employing system-oriented evaluation methodology for biological nutrient removal (BNR) processes based on the CPE techniques developed by U.S. EPA for evaluation of conventional biological processes. The BNR CPE system applied to five domestic BNR plants adopting $A^2/O$ process confirmed that all target plants except the smallest one had not any serious defective performance and process stability was enhanced with increasing plant size. The system also clearly verified relatively poor performances in anoxic reactors without exception mainly due to influent carbon limit rather than functional defect. Consistent good performances were confirmed even during both winter season and wet weather generally known to be difficult to achieve satisfactory removals. Presentation of evaluation results by modified radar chart system simplified and clarified the evaluation and analysis procedures. The BNR CPE system could not only discover readily the causes of present and prospective poor performances but also facilitate the suggestion of their optimization options. Mutual effect and cause-and-effect among operation parameters and unit processes were also found easily using the evaluation system. The system justified that the adverse effect of defective operating parameters could be compensated by other favorable parameters, especially in anaerobic and anoxic reactors as well as during the winter season.

• 대한치과교정학회지
• /
• 제36권2호
• /
• pp.153-160
• /
• 2006

성장기 환자를 다루는 경우가 많고 치료기간이 긴 교정치료는 성장과 발육에 대한 지식이 필수적이다. 현재 활용되고 있는 일반 체성 성장 관찰 도표는 현 시대의 성장기 환자의 체성 성장 추이를 적절히 반영하지 못하고 있는바 이는 이용된 자료가 오래되었기 때문이다. 이에 따라 본 연구는 2004년 산업자원부 기술표준원에서 시행하고 대한인간공학회에서 주관한 2004년 제5차 한국인 인체치수조사사업보고서 자료를 토대로 현시성 있고 유용한 성장 곡선 및 성장 속도 곡선을 제작하는 과정을 소개할 목적으로 시행되었다. 자료를 처리하고 재배열하는 과정을 통하여 자료의 변이를 사분위수를 기본 골격으로 하고 1, 5, 95, 99 백분위수를 추가하여 남녀별 키 몸무게 성장 곡선을 제작하였고 이와 아울러 기하 평균에 기초한 성장 속도 곡선도 제작하였다. 본 연구 결과 생성된 한국인 키 및 몸무게 신 평가표는 성장 발육의 지표로 이용될 수 있으며, 성장 발육과 관련, 교정 환자와의 의사 소통에 도움이 될 수 있을 것으로 생각되었다.

• Geomechanics and Engineering
• /
• 제21권2호
• /
• pp.123-132
• /
• 2020

Due to the various restrictions and problems related to the construction of new roads in urban areas, underground road construction has been receiving a great deal of attention in the field of tunnel engineering. In this study, a double-deck road tunnel with a diverging section was analyzed for the evaluation of its stability. Both numerical analysis and scale model tests were performed, the results were used to develop a stability evaluation method for double-deck tunnels with diverging sections constructed in rocks by NATM. From regression analyses conducted on the results of the numerical analysis, an equation and a chart were derived, these tools allow us to obtain the strength/stress ratio (SSR) for double-deck road tunnels with a diverging tunnel in various diverging conditions quickly and accurately. These tools have great potential to help engineers evaluate the stability of double-deck tunnels in the preliminary design stage.