• Bulletin of the Korean Chemical Society
• /
• v.32 no.4
• /
• pp.1298-1302
• /
• 2011

This study describes the development of an electrochemical array immunochip for the detection of IgG. Interdigitated immunochip platforms were fabricated by sputtering gold on a glass wafer by using MEMS process and then were coated with Eudragit S100, an enteric polymer, forming an insulating layer over the working area of immunochips. The breakdown of the polymer layer was exemplified by the catalytic action of urease which, in the presence of urea, caused an alkaline pH change. This subsequently caused an increase of the double layer capacitance of the underlying electrode. Used in conjunction with a competitive immunoassay format, this allowed the ratio of initial to final electrode capacitance to be directly linked with the concentration of analyte, i.e. IgG. Responses to IgG could be detected at IgG concentration as low as $250\;ngmL^{-1}$ and showed good linearity up to IgG concentration as high as $20\;{\mu}gmL^{-1}$.

• Archives of Pharmacal Research
• /
• v.26 no.12
• /
• pp.1002-1008
• /
• 2003

Ferulic acid (3-methoxy, 4-hydroxy cinnamic acid) is a flavoid component possessing antioxidant property. The compound is currently under development as a new drug candidate for the treatment of the dementia. The objective of this preformulation study was to determine the physicochemical properties of ferulic acid. The n-octanol to water partition coefficients of ferulic acid were 0.375 and 0.489 at the pHs of 3 and 10, respectively. Accelerated stability study for ferulic acid indicated that the t 90 value for the drug was estimated to be 459 days at $25^{\circ}C$. Ferulic acid was also found to be unstable under the relative humidity of more than 76%, probably because of the hygroscopic nature of the drug. In order to study compatibility of ferulic acid with typical excipients, potential change in differential scanning calorimetry spectrum was studied in 1: 1 binary mixtures of ferulic acid and typical pharmaceutical excipients (e.g., Aerosil, Avicel, CMC, Eudragit, lactose, PEG, PVP, starch and talc). Avicel, CMC, PVP and starch were found to be incompatible with ferulic acid, indicating the addition of these excipients may complicate the manufacturing of the formulation for the drug. Particle size distribution of ferulic acid powder was in the size range of 10-190 $\mu$m with the mean particle size of 61 $\mu$m. The flowability of ferulic acid was apparently inadequate, indicating the granulation may be necessary for the processing of the drug to solid dosage forms. Two polymorphic forms were obtained by recrystallization from various solvents used in formulation. New polymorphic form of ferulic acid, Form II, was obtained by recrystallization from 1,4-dioxane. The equilibrium solubility for Form I was approximately twice of that for Form II. The dissolution rate of Form II was higher than that of Form I in the early phase (<6 min). Therefore, these physicochemical information has to be taken in the consideration for the formulation of ferulic acid.

• YAKHAK HOEJI
• /
• v.42 no.2
• /
• pp.187-195
• /
• 1998

In order to ameliorate disadvantages of buccal ointments and mucoadhesive tablets used for the treatment of aphthosis, a thin mucoadhesive patch containing triamcinolone acetoni de was designed and evaluated for the pharmaceutical properties. The adhesive gel layer consisting of Noveon AA-1, hydroxypropylcellulose-M and ethylcellulose N 100, and the protective gel layer of ethylcellulose N 100, Eudragit RSPO and castor oil have been formulated and various properties such as viscosity of drug gel layer, thickness, in vitro adhesion time, adhesive strength, surface pH, content uniformity and drug release are tested. The mean viscosity of drug-containing gel layer was found to increase with increasing amount of Noveon OAA-1 or hydroxypropylcellulose-M. The optimum formulation showed the thickness of 171 ${\mu}$m, surface pH of 4.6, in vitro adhesion time of 8 hours and adhesive strength of 272.7g/sheet. The drug content of each patch was relatively homogeneous with the value of 273${\pm}$6.77g. Drug release study showed that compared to mucoadhesive tablet, the patch showed a faster drug release. Drug release was delayed by hydroxypropylcellulose-M, but not by ethylcellulose N 100. The patches prepared were nonirritant and the muco adhesion was better than the commercial product (AftachR) on the market. Based on these results, this mucoadhesive patch is expected to be an effective dosage form for the treatment of aphthosis.

• YAKHAK HOEJI
• /
• v.44 no.5
• /
• pp.440-447
• /
• 2000

Microspheres of felodipine, which is one of the calcium channel blocker using a mixture of Eudragi $t^{R}$ RL, L, E, and cellulose on the base of Eudragi $t^{R}$ RS were investigated. Cremopho $r^{R}$ was added to each preparation of polymers in order to increase the release of felodipine from microspheres. Felodipine-loaded microspheres were prepared by a solvent evaporation method, which is based on dispersion of methylene chloride containing felodipine and polymers in 0.5 w/v % polyvinyl alcohol solution. The average diameter based on the size distribution of the felodipine-loaded microspheres was observed to be ca. 40-55 ${\mu}{\textrm}{m}$. A good and smooth surface were showed in all types of the microspheres. The amount of felodipine loaded was over 90 w/w % in all types of microspheres. The dissolution profiles of felodipine from microspheres were similar with each type of polymer, and about a 60 w/w % of the total amount of felodipine loaded to microsphere was released within 7 hours. Dissolution rate of felodipine from the microsphere was increased by addition of Cremophor. After oral administration of the felodipine-loaded microspheres in PVA solution and felodipine alone in PEG solution to rats, respectively, the pharmacokinetic study revealed that the Tmax values of the microspheres were observed in the range of 0.67~l.0 hr while that of the felodipine solution was obtained 0.33 hr. In addition, the AUC of the microspheres at 0 to 7 hr was remarkably increased in comparison to that of felodipine solution. These results revealed that the microspheres based on Eudragit RS could be a good candidate for the controlled release drug delivery system for felodipine.e.e.e.

• Polymer(Korea)
• /
• v.32 no.4
• /
• pp.328-333
• /
• 2008

The osmotic delivery systems are based on osmosis. The transverse diffusion of water through a porous membrane from a medium with a low osmotic pressure to a medium with a high osmotic pressure. Nifedipine tablet dosage forms of Procardia $XL^{(R)}$(Pfizer) and $Adalat^{(R)}$(Bayer) are commercialized systems of this type that push-pull osmotic tablet operates successfully in delivering water-insoluble drugs. We prepared osmotic pellet system by fluidized bed coating method, and model-drug used nifedipine. The osmotic pellet system was composed of the core material. the swelling and osmotic pressure layer, the drug coating layer, and the porous membrane. This work is performed to investigate the effect of different factors, such as composition and thickness of membrane. The osmotic pellet has been successfully prepared by fluidized bed coating technology. The drug release behavior depended on the increase of CA ratio and thickness in porous membrane. The morphology of the osmotic pellet before and after the dissolution test were observed by SEM. In conclusion, we found that the drug release of osmotic pellet depended on the composition and coating thickness of porous membrane.

• Journal of Pharmaceutical Investigation
• /
• v.32 no.3
• /
• pp.185-190
• /
• 2002

To improve the solubility of poorly water-soluble drug and to develop a sustained release tablets, the need for the technique, the formation of solid dispersion with polymeric materials that can potentially enhance the dissolution rate and extent of drug absorption was considered in this study. The 1:1, 1:4, and 1:5 solid dispersions were prepared by spray drying method using PVP K30, ethanol and methylene chloride. The dissolution test was carried out at in phosphate buffer solution at $37^{\circ}C$ in 100 rpm. Solid dispersed drugs were examined using differential scanning calorimetry and scanning electron microscopy, wherein it was found that felodipine is amorphous in the PVP K30 solid dispersion. Felodifine SR tablets were prepared by direct compressing the powder mixture composed of solid dispersed felodipine, lactose, Eudragit and magnesium stearate using a single punch press. In order to develop a sustained-release preparation containing solid dispersed felodipine, a comparative dissolution study was done using commercially existing product as control. The dissolution rate of intact felodipine, solid dispersed felodipine and its physical mixture, respectively, were compared by the dissolution rates for 30 minutes. The dissolution rates of felodipine for 30 minutes from 1:1, 1:4, 1:5 PVP K30 solid dispersion were 70%, 78% and 90%. However, dissolution rate offelodipine from the physical mixture was 5% of drug for 30 minutes. Our developed product Felodipine SR Tablet showed dissolution of 17%, 50% and 89% for 1, 4, and 7 hours. This designed oral delivery system is easy to manufacture, and drug releases behavior is highly reproducible and offers advantages over the existing commercial product. The dissolution rate of felodipine was significantly enhanced, following the formation of solid dispersion. The solid dispersion technique with water-soluble polymer could be used to develop a solid dispersed felodipine SR tablet.

• Korean Journal of Food Science and Technology
• /
• v.34 no.5
• /
• pp.856-861
• /
• 2002

Surface-modified powders were produced by hybridization system using core freeze-dried lactic acid bacteria (Lactobacillus acidophilus ATCC 43121) and enteric coating materials. Scanning electron microscopy showed that the surface of freeze-dried lactic acid bacteria changed to smooth round shape during surface reforming process, although no significant physical damages affecting the activity of the lactic acid bacteria were observed based on viability and salt-tolerance tests. Signigicant difference was not found in acid tolerance test probably due to the inherent acid tolerance of L. acidophilus ATCC 43121. Significantly improved heat tolerance was obtained by surface modification process. Among the tested coating materials, Sureteric showed a higher surface- reforming ability than Eudragit S100 and L100-55. Core : coating ratio agent of 9 : 1 (w/w) with rotor speed of 15,000 rpm for 3 min were determined to be optimum conditions for the process.