• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.3
• /
• pp.111-116
• /
• 2003

The red emitting phosphors for low voltage cathode luminescent, fine $(Y,Gd)_2O_2$S : Eu powders were synthesized and investigated the effect of $Gd^{3+}$as sensitizer at variety of sintering temperature. The highly intense emission line of $(Y,Gd)_2O_2$S : Eu at 627 nm is attributed in the transition from $^5D_o to ^7F_2$ energy levels. It showed the maximum value at the doping level of 5 mole% of $Gd^{3+}$at $950^{\circ}C$ of sintering temperature and then, it was degraded rapidly. The mean particle size of $(Y,Gd)_2O_2$S : Eu was obtained around 1 fm and the cathode luminescent properties of (Y,Gd)$_2$O$_2$S : Eu were better than those of $(Y,Gd)_2O_2$S : Eu.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.290-293
• /
• 2009

We both theoretically and experimentally investigated the luminescence wavelength control of the $Eu^{2+}$-doped $CaAlSiN_3$ (CASN:$Eu^{2+}$). To modify emission wavelength, Na-doped and Mg-doped CASN:$Eu^{2+}$ (NCASN:$Eu^{2+}$ and MCASN:$Eu^{2+}$) have been studied. According to quantum chemistry calculation result, we synthesized NCASN:$Eu^{2+}$ and MCASN:$Eu^{2+}$. NCASN:$Eu^{2+}$ and MCASN:$Eu^{2+}$ showed shorter emission wavelength than that of CASN:$Eu^{2+}$.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.16 no.3
• /
• pp.347-357
• /
• 2018

The applicability of room temperature ionic liquids (RTILs), 1-alkyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([$C_nmim$] [$Tf_2N$]), was investigated for the extraction of Am(III) and Eu(III) from nitric acid using n-octyl(phenyl)-N,N-diisobutyl carbamoylmethyl phosphine oxide (CMPO) and tri-n-butylphosphate (TBP) as extractants. The distribution ratios of Am(III) and Eu(III) in CMPO-TBP/[$C_nmim$][$Tf_2N$] were measured as a function of various parameters such as the concentrations of nitric acid, CMPO, and TBP. The results were compared with those obtained in CMPO-TBP/n-dodecane (n-DD). With comparable concentrations of the extractants, the distribution ratios obtained with RTILs were much higher than those obtained with n-DD. It was observed that the extraction efficiency was less for Eu(III) than for Am(III). The extraction of Am(III) and Eu(III) decreased with increases in the feed acidity for all three RTILs. The results suggest that the extraction of Am(III) and Eu(III) by CMPO in RTILs from nitric acid proceeds through the cation-exchange mechanism. The distribution ratios of Am(III) and Eu(III) increased with increases in the concentration of CMPO for all three RTILs. A linear regression analysis of the extraction data resulted in a straight line with a slope of about 3, suggesting the involvement of 3 molecules of CMPO during the extraction process.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.3
• /
• pp.223-227
• /
• 2007

The effect of Eu contents on the ferroelectric properties of $Bi_{4-x}Eu_xTi_3 O_{12}$ (BET) thin films has been investigated. Bismuth Europium titanate thin films with a Eu contents were prepared on the $Pt/Ti/SiO_2/Si$ substrate by metal-organic decomposition technique. The structure and the morphology of the films were analyzed using X-ray diffraction (XRD) and field emission scanning microscopy (FE-SEM), respectively. From the XRD analysis, it was found that BET thin films have polycrystalline structure, and the layered-perovskite phase is obtained when the Eu contents exceeds 0.2 (x > 0.2). Also, the ferroelectric characteristics of the BET thin films were found to be dependent on the Eu content. Particularly, the BET films doped with x = 0.75 show better ferroelectric properties (remanent polarization 2Pr = 60.99 C/$cm^2$ and only a little polarization fatigue up to $3.5{\times}10^9$ bipolar switching cycling) than those doped with other Eu contents.

• Korean Journal of Materials Research
• /
• v.18 no.3
• /
• pp.137-142
• /
• 2008

Blue-emitting BAM:Eu phosphor powders were formed by post-treatment of precursor powders with hollow or dense morphologies. The morphologies of the precursor powders obtained by spray pyrolysis were controlled by changing the preparation conditions and by changing the type of spray solution. The effects of the morphologies of the precursor powders on the characteristics of the BAM : Eu phosphor powders reacted with $AlF_3$ flux were investigated. Precursor powders with a spherical shape and a hollow morphology produced BAM : Eu phosphor powders with a plate-like morphology, a fine size and a narrow size distribution. On the other hand, precursor powders with a spherical shape and dense morphology produced BAM : Eu phosphor powders with a plate-like morphology and a large size. $AlF_3$ flux improved the photoluminescence intensities of the BAM : Eu phosphor powders. The photoluminescence intensity of the fine-sized BAM : Eu phosphor powders with a plate-like morphology was 90% of the commercial product under vacuum ultraviolet conditions.

• Korean Journal of Materials Research
• /
• v.10 no.3
• /
• pp.204-211
• /
• 2000

The $(Y,Gd)BO_3:Eu$ red phosphors for PDP application were synthesized by ultrasonic spray method and then their photoluminance properties were investigated under 147nm VUV irradiation. The precursor solution of acetates of Y, GD and Eu and boric acid diluted in water was sprayed using 1.7 MHz ultra-sonic sprayer into the reaction tube held at high temperature. The as-sprayed particles were amorphous phase having C-C and C-H bonds due to the insufficient thermal reaction during the pass along the tube. But the sprayed samples followed by heat treatment at $1100^{\circ}C$ had the same crystal structure and chemical composition as those samples followed by solid state reaction. It was found that the $(Y_{0.7}Gd_{0.3})_{0.95} BO_3:Eu_{0.05}^{3+}$ phosphor particles synthesized by spray at $500^{\circ}C$ and then heat treated at $900^{\circ}C$ had a spherical-like shape and fine particle size at $0.7{\mu\textrm{m}}$ having a narrow size distribution, while the phosphor particles made by solid state reaction was $3{\mu\textrm{m}}$ coarse and non-uniform size distribution. The emitting intensity under 147nm VUV excitation for $(Y_{0.7}Gd_{0.3})_{0.95}BO_3:Eu_{0.05}^{3+}$ phosphor prepared by spray method was found to be higher than those phosphor made by solid state reaction and the commercial $(Y,Gd)BO_3:Eu$ product.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.171-171
• /
• 2013

최근에 희토류 이온이 도핑된 형광체를 램프, 플라즈마, 디스플레이 패널, 음극선관, 광전 소자에 응용하기 위한 연구에 많은 노력이 경주되고 있다. 특히 희토류 이온은 4f-껍질에 존재하는 전자의 독특한 성질 때문에 좁은 밴드폭과 강한 발광 특성을 나타내므로 발광 다이오드, 자석, 촉매, 디스플레이 패널용 형광체로 개발되고 있다, 본 연구에서는 고효율의 녹색과 적색 형광체를 개발하기 위하여 모체 결정은 SrSnO3, 활성제 이온은 Eu (유로퓸) 와 Tb (테르븀)을 선택하여 도핑하였다. 합성된 형광체 분말의 회절상을 XRD로 측정한 결과에 의하면, Eu3+와 Tb3+의 함량비에 관계없이 모든 세라믹 분말은 JCPDS #74-1298에 제시된 회절상과 일치하였으며, 주 피크는 $31.3^{\circ}$, $44.9^{\circ}$, $55.8^{\circ}$에서 최대값을 갖는 (110), (200), (211)면에서 발생한 회절 신호이며, 이밖에도 $22.04^{\circ}$, $65.4^{\circ}$, $74.3^{\circ}$에서 약한 회절 피크를 갖는 (100), (220), (013)면의 신호들이 관측되었다. Eu3+ 이온의 함량비가 0.05 mol 인 경우에 (110)과 (211) 피크의 세기가 최대값을 나타내었고, Eu3+의 함량비가 증가함에 따라 두 피크의 세기는 점점 감소하였다. XRD의 데이터를 Scherrer의 식에 대입하여 계산한 결정 입자의 크기는 Eu3+ 이온이 도핑된 경우에는 0 mol에서 최소의 크기를 나타내었고, Tb3+ 이온이 도핑된 경우에 입자의 크기는 0.05 mol에서 최소이었고 0 mol에서 최대값을 보였다. SEM으로 촬영한 표면 형상의 변화를 관측한 결과, Eu3+의 함량비가 0.15 mol인 경우에, 결정 입자의 평균 크기는 400~450nm이며, Tb3+의 함량비가 0.05 mol인 경우에, 결정 입자의 평균 크기는 270~290nm 이었으며, 입자의 형상은 균일하게 분포하는 구형 형태을 보였다. Eu3+와 Tb3+ 이온의 함량비가 점점 증가함에 따라 미립자들이 서로 뭉쳐져서 각각 약 720 nm와 580 nm의 크기를 갖는 큰 입자를 형성하였고, 불규칙적인 분포를 나타내었다. 여기 파장 293 nm에서 Tb3+가 도핑된 SrSnO3:Tb3+ 형광체 분말의 발광 스펙트럼을 측정한 결과에 의하면, Tb3+의 함량비에 관계없이 모든 시료는 주 피크인 550 nm (녹색)와 상대적으로 세기가 약한 500, 590, 630 nm에서 발광 스펙트럼을 나타내었다. 주 피크의 발광 세기는 0.01 mol~0.15 mol에서는 증가 하였고, 더욱 함량비를 증가함에 따라 급격하게 감소하였다. 이 현상은 활성제 이온의 mol 비가 증가함에 따라 이온 사이의 거리가 가까워져서 서로 뭉치는 현상이 주도적으로 작용하여 발광의 세기가 현저히 감소하는 것으로 판단된다. 0.10 mol 일 때 세기가 가장 강한 녹색 형광 신호를 얻었다. 여기 파장 400nm에서 Eu3+가 도핑된 SrSnO3:Eu3+ 형광체 분말의 형광 스펙트럼은 Eu3+의 함량비에 관계없이 590, 619, 696 nm에서 관측되었다. Eu3+의 몰 비가 0.01~0.05 mol 영역에서 619 nm가 주 피크이나, 몰 비가 더욱 증가함에 다라 주 피크의 파장은 590 nm로 이동하였다. 한편, 696 nm의 발광세기는 몰 비가 증가함에 따라 더욱 증가하였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.11a
• /
• pp.103-104
• /
• 2012

고상반응법을 사용하여 $Eu^{3+}$ 이온의 농도를 변화시키면서 $Ba_{1-x}MoO_4:Eu{_x}^{3+}$ 형광체 분말을 제조하였다. 합성한 적색 형광체의 결정 구조, 표면 형상, 발광 및 흡수 스펙트럼은 각각 XRD, SEM, 자외선-가시광선 분광기를 사용하여 조사하였다. 형광체 분말의 결정 구조는 $Eu^{3+}$ 이온의 농도비에 관계없이 $2{\theta}=26.52^{\circ}$에 주 피크를 갖는 정방정계이었으며, 최대 적색 발광 스펙트럼은 618 nm에서 관측되었다.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.2
• /
• pp.419-422
• /
• 2009

The luminescence intensity of calcium sulfide codoped with $Eu^{2+},\;Si^{4+}\;and\;Ga^{3+}$ was investigated as a function of the dopant concentration. An enhancement of the red luminescence resulted from the incorporation of $Si^{4+}\;and\;Ga^{3+}\;into\;CaS:Eu^{2+}.\;The\;non-codoped\;CaS:Eu^{2+}$ converted only 3.0% of the absorbed blue light into luminescence. As the $Si^{4+}\;and\;Ga^{3+}$ were embedded into the host lattice, the luminescence intensity increased and reached a maximum of Q = 10.0% at optimized concentrations of the codopants in CaS. Optimized CaS:$Eu^{2+},Si^{4+},Ga^{3+}$ phosphors were fabricated with blue GaN LED and the chromaticity index of the phosphor-formulated GaN LED was investigated as a function of the wt% of the optimized phosphor.

• Journal of Information Display
• /
• v.6 no.2
• /
• pp.25-29
• /
• 2005

The luminescent properties of $Eu^{3+}$ and $Sm^{3+}$ doped potassium tungstate phosphor are investigated. The $K_{4-3x}(WO_4)_2:Eu^{3+}\;_x,Sm^{3+}\;_y$ phosphor is produced by firing the mixed precursors, followed by re-firing with a flux. The re-firing process results in the defect-free surface and uniform growth of the particles. The strong absorption in the region of ultra violet light is observed due to the 4f-4f electron transitions of the $Eu^{3+}$ and $Sm^{3+}$ ions. The doping concentration of europium into potassium tungstate is relatively high, compared to other host materials. It is revealed that the crystal structure is a monoclinic with space group, C2/c. This crystal structure facilitated the $Eu^{3+}$ ions to be located with the Eu-Eu distance larger than 5 ${\AA}$ so that concentration quenching does not occur even at high doping concentration. The excitation spectrum could be adjusted by the introduction of the samarium. A small amount of the $Sm^{3+}$ ions that acts as a sensitizer increases the energy absorption peak around 405 nm.