• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.185-185
• /
• 2003

백색 LED를 실현하는 방법의 하나로 UV LED와 적, 녹, 청의 3색 형광체를 이용하는 방법이 주목받고 있다. 이것은 연색성과 색온도 제어 특성이 뛰어나다. 그러나 기존의 형광체는 단파장, 약 250nm 전후, 에서 여기되는 특성을 갖고 있기 때문에 near UV(nUV), 약 380-410nm, 의 LED에 응용하기에는 발광특성에 문제점을 갖고 있다. 본 연구에서는 nUV 여기가 가능한 strontium aluminate를 flux를 이용한 고상반응법으로 합성하고 발광 특성을 분석하였다. SrO와 A1$_2$ $O_3$의 조합비와 반응조건에 따라서 SrA1$_2$ $O_4$ 흑은 Sr$_4$Al$_{14}$ $O_{25}$ 가 합성되었고, 이들은 도핑과 함께 각각 약 520nm에서의 녹색발광과 약 480nm에서의 청녹색 발광 특성을 보이고 있었다. 도펀트로는 Eu, Dy, Ce, Pr 등이 단독 혹은 혼합되어 첨가되었고, 종류와 양에 따라서 발광 파장의 이동이 관찰 되었고, 강도도 이것에 크게 의존하고 있었다. 또한 발광강도는 여기 파장에도 의존하고 있었으며, 약 350-390nm의 nUV에서 가장 높은 발광강도가 관찰되었다.다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.172-172
• /
• 2013

최근에 디스프로슘 이온이 도핑된 형광체의 백색 발광 현상 때문에 백색 발광 소재의 제조에 관한 연구가 상당한 관심을 끌고 있다. 본 연구에서는 $Eu^{3+}$와 $Dy^{3+}$ 이온의 몰 비를 변화시키면서 $BaNb_2O_6:RE^{3+}$ (RE=Eu, Dy) 형광체 분말을 합성한 결과를 보고한다. 특히 활성제 이온인 $Eu^{3+}$와 $Dy^{3+}$ 이온의 몰 비에 따른 $BaNb_2O_6$ 형광체 분말의 결정 구조, 입자의 모양과 크기, 흡광과 발광 스펙트럼의 변화를 관측하였고, 최적의 합성 조건을 제시하고자 한다. 파장 393 nm로 여기 시킨 $Dy^{3+}$ 이온의 몰 비에 따른 $BaNb_2O_6$ 형광체 분말의 발광 스펙트럼은 580 nm에 주 피크를 갖는 황색 스펙트럼이 관측되었다. 이 발광 신호는 $^4F_{9/2}-^6H_{13/2}$ 전이 신호이다. $Dy^{3+}$ 이온의 몰 비가 0 mol인 경우에는 발광 신호가 검출되지 않았다. $Dy^{3+}$ 이온의 몰 비가 0.10 mol일 때 발광 피크의 세기는 최대이었으며, $Dy^{3+}$ 이온의 몰 비가 더욱 증가함에 따라 발광 스펙트럼의 세기는 계속 증가하지 않고 갑자기 감소하기 시작하였다. 이것은 $Dy^{3+}$ 이온의 몰 비가 임계값을 초과하여 더욱 증가하면 모체 격자들 사이에 치환 고용되어 있는 $Dy^{3+}$ 이온들 사이의 거리가 더욱 가까워져서 $Dy^{3+}$ 이온들이 서로 용이하게 결합함으로써 내부 산란에 의하여 발광의 세기가 감소함을 의미한다. 흡광 스펙트럼의 경우에, $Dy^{3+}$ 이온의 몰 비가 0.01 mol일때 형광체 분말은 두 종류의 흡광 스펙트럼을 나타내었다. 첫째는 $Dy^{3+}$ 양이온과 $O^{2-}$ 음이온들 사이에 발생한 전하 전달 밴드에 의해 발생하는 310 nm를 정점으로 하여 280~340 nm 영역에 걸쳐서 광범위하게 분포하는 흡광 신호가 관측되었으며, 둘째는 $Dy^{3+}$ 이온의 $4f^9$ 전자 배열 내에서 발생하는 4f-4f 전이 신호로서, 이것은 350~500 nm 영역에 걸쳐서 비교적 밴드폭이 좁은 다수의 흡광 신호가 나타났다. 본 실험에서는 다섯 개의 피크를 갖는 흡광 신호가 검출되었는데, 이중에서 제일 강한 주 피크인 393 nm의 흡수 파장은 모체 격자 내에 있는 $Dy^{3+}$ 이온의 바닥 상태인 $^6H_{15/2}$ 준위에서 여기 상태인 $^4F_{7/2}$ 인 에너지 준위로 전이하면서 발생한 신호이며, 이에 비하여 상대적으로 흡광 세기가 약한 370, 432, 458, 370 nm의 흡수 파장이 관측되었다.

• Transactions on Electrical and Electronic Materials
• /
• 제4권1호
• /
• pp.29-33
• /
• 2003

Europium doped yttrium oxide submicron-sized particles were prepared by ultrasonic aerosol pyrolysis. To examine the size effect of submicron-sized-particle, the photoluminescence of the particles was investigated. The particle size was controlled by pH, reaction temperature, molar concentration of yttrium in precursor solution. The PL intensity of submicron-sized particles was decreased with particles size. When the particle size is above about 150 times of Bohr radius of Y$_2$O$_3$, the optical property of the particles shows the bulk characteristics.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.49-49
• /
• 2009

Phosphors with oxide host material, YAG:$Ce^{3+}$ and $(Ca,Sr,Ba)_2SiO_4:Eu^{2+}$ yellow phosphor, has been used for LED applications. The WLEDs using these phosphors are widely used for LCD backlighting, automobile, and general lighting applications since they have high conversion efficiency and good thermal and chemical stability which can meet necessary life time of LED products up to now. With advances of LED chip technology, the external quantum efficiency and driving current in chip get higher so that the phosphors for high power chip are required to maintain high conversion efficiency and stability at high temperature due to the heat dissipated from LED chips. In addition, higher color rendering index of LED lighting and color reproducibility of LCD than those of LEDs with single yellow phosphors are required. In order to overcome these technical issues rising from evolution of LED technology, new phosphors are in demand and nitride phosphors, one of the promising new candidate materials, will be discussed here.

• 한국분말재료학회지
• /
• 제22권1호
• /
• pp.27-31
• /
• 2015

Flat panel display devices are mainly used as information display devices in the 21st century. The worldwide waste flat panel displays are expected at 2-3 million units but most of them are land-filled for want of a proper recycling technology More specifically, rare earth metals of La and Eu are used as fluorescent materials of Cold Cathode Flourscent Lamp(CCFL)s in the waste flat panel displays and they are critically vulnerable and irreplaceable strategic mineral resources. At present, most of the waste CCFLs are disposed of by land-filling and incineration and proper recovery of 80-plus tons per annum of the rare earth fluorescent materials will significantly contribute to steady supply of them. A dearth of Korean domestic research results on recovery and recycling of rare earth elements in the CCFLs prompts to initiate this status report on overseas research trends and noteworthy research results in related fields.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.461-462
• /
• 2008

$BaMgAl_{10}O_{17}$:Mn, $Eu^{2+}$ green phosphors has been synthesized by the solid state reaction. Green phosphors of nano-size were manufactured in short time by shake method. which were easily manufactured respectively general method. Green phosphors of nano size were control additive, size of $ZrO_3$ ball, shake time and weight of ball in toluene. In result that green phosphors were obtained particle size of 140nm~150nm. The characteristics of fired samples were obtained by 365nm and 380nm excitation source under ultraviolet. In result that the highest PL intensity were observed in wavelength of 365nm.

• E2M - 전기 전자와 첨단 소재
• /
• 제12권7호
• /
• pp.7-11
• /
• 1999

Fully sealed field emission display in size of 4.5 inch has been fabricated using single-wall carbon nanotubes-organic vehicle com-posite. The fabricated display were fully scalable at low temperature below 415$^{\circ}C$ and CNTs were vertically aligned using paste squeeze and surface rubbing techniques. The turn-on fields of 1V/${\mu}{\textrm}{m}$ and field emis-sion current of 1.5mA at 3V/${\mu}{\textrm}{m}$ (J=90${\mu}{\textrm}{m}$/$\textrm{cm}^2$)were observed. Brightness of 1800cd/$m^2$ at 3.7V/${\mu}{\textrm}{m}$ was observed on the entire area of 4.5-inch panel from the green phosphor-ITO glass. The fluctuation of the current was found to be about 7% over a 4.5-inch cath-ode area. This reliable result enables us to produce large area full-color flat panel dis-play in the near future. Carbon nanotubes (CNTs) have attracted much attention because of their unique elec-trical properties and their potential applica-tions [1, 2]. Large aspect ratio of CNTs together with high chemical stability. ther-mal conductivity, and high mechanical strength are advantageous for applications to the field emitter [3]. Several results have been reported on the field emissions from multi-walled nanotubes (MWNTs) and single-walled nanotubes (SWNTs) grown from arc discharge [4, 5]. De Heer et al. have reported the field emission from nan-otubes aligned by the suspension-filtering method. This approach is too difficult to be fully adopted in integration process. Recently, there have been efforts to make applications to field emission devices using nanotubes. Saito et al. demonstrated a car-bon nanotube-based lamp, which was oper-ated at high voltage (10KV) [8]. Aproto-type diode structure was tested by the size of 100mm $\times$ 10mm in vacuum chamber [9]. the difficulties arise from the arrangement of vertically aligned nanotubes after the growth. Recently vertically aligned carbon nanotubes have been synthesized using plasma-enhanced chemical vapor deposition(CVD) [6, 7]. Yet, control of a large area synthesis is still not easily accessible with such approaches. Here we report integra-tion processes of fully sealed 4.5-inch CNT-field emission displays (FEDs). Low turn-on voltage with high brightness, and stabili-ty clearly demonstrate the potential applica-bility of carbon nanotubes to full color dis-plays in near future. For flat panel display in a large area, car-bon nanotubes-based field emitters were fabricated by using nanotubes-organic vehi-cles. The purified SWNTs, which were syn-thesized by dc arc discharge, were dispersed in iso propyl alcohol, and then mixed with on organic binder. The paste of well-dis-persed carbon nanotubes was squeezed onto the metal-patterned sodalime glass throuhg the metal mesh of 20${\mu}{\textrm}{m}$ in size and subse-quently heat-treated in order to remove the organic binder. The insulating spacers in thickness of 200${\mu}{\textrm}{m}$ are inserted between the lower and upper glasses. The Y\ulcornerO\ulcornerS:Eu, ZnS:Cu, Al, and ZnS:Ag, Cl, phosphors are electrically deposited on the upper glass for red, green, and blue colors, respectively. The typical sizes of each phosphor are 2~3 micron. The assembled structure was sealed in an atmosphere of highly purified Ar gas by means of a glass frit. The display plate was evacuated down to the pressure level of 1$\times$10\ulcorner Torr. Three non-evaporable getters of Ti-Zr-V-Fe were activated during the final heat-exhausting procedure. Finally, the active area of 4.5-inch panel with fully sealed carbon nanotubes was pro-duced. Emission currents were character-ized by the DC-mode and pulse-modulating mode at the voltage up to 800 volts. The brightness of field emission was measured by the Luminance calorimeter (BM-7, Topcon).