• 한국응용약물학회:학술대회논문집
• /
• 한국응용약물학회 1994년도 춘계학술대회 and 제3회 신약개발 연구발표회
• /
• pp.196-196
• /
• 1994

DDS에 활용될 수 있는 고분자 소재를 개발할 목적으로 물성 및 응용성이 우수한 고분자 겔에 관한 연구를 수행하였다. Ethylene oxide,propylene oxide 각각의 copolymer인 poloxamer등의 prepolymer들을 triisocyanate로 가교시키고 diisocyanate 로 chain이 연장된 "soft hydrogel"을 제조하였다. 모델 약물을 선정하여 crosslinker와 extender의 조절에 따른 hydrogel의 약물 방출 조절능을 조사하였으며 그 기전을 규명하고자 하였다. 가교부위에 urethane bond를 함유한 soft hydtogel은 건조상태에서도 고무와 같은 전연성을 보여 일반적인 hydrogel과 대비되는 특성을 보였으며 이에 따른 다양한 활용성이 기대되었다. Extender및 crosslinker의 비율에 따라서 이 rubber elasticity가 조절되었다. 가교도가 감소할수록 팽윤도가 상승하였고 이에 따른 약물방출도 증가함을 확인하였다. 또한 Prepolymer의 분자량 및 친수/소수성등의 물성에 따라 약물방출을 조절할 수 있었다. 제조된 hydrogel에 조절방출시 필요한 기능을 부가시키고자 poly(carylic acid)류와 IPN 공중합체를 합성하여 물성을 조사하였고 비이온성/양이온성/음이온성 모델약물을 선정하여 pH에 따른 가변적 팽윤도와 이온성 상호작용등에 근거한 약물 조절방출기전을 조사하였다.기전을 조사하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.174-175
• /
• 2006

In this paper, AC dielectric strength of the interface between Epoxy and EPDM (ethylene propylene diene terpolymer) was investigated. Air compress system was used to give pressure to the interface. Specimens were prepared in various ways to generate different surface conditions for each type of interface. Increasing interfacial pressure, decreasing surface roughness and spreading oil over surfaces improve the AC interfacial dielectric strength. Especially, the dielectric strength was saturated at certain interfacial pressure.

• 유변학
• /
• 제5권2호
• /
• pp.144-148
• /
• 1993

Nylon-6의 내충격성을 개선하기 위한 개질제로써 에틸렌-프로필렌 고무(EPR)와 에 틸렌-아크릴 에스터-무수말레산 공중합체(EAM)를 첨가한 nylon-6/EPR/EAM 블렌드 시스 템의 유변학적 특성을 24$0^{\circ}C$에서 조사하였다. 개질제중 EAM의 점도는 조성물 가운데 가장 낮음에도 불구하고 첨가량을 증가함에 따라 블렌드의 점도는 증가하였다. 또한 EPR(I)의 점 도가 EPR(II)의 점도보다 낮지만 EAM 함량이 증가함에 따라 nylon-6/EPR(I)/EAM의 점도 는 nylon-6/EPR(II)/EAM의 점도보다 높아지는 현상이 관찰되었다. 이러한 특성을 분산상의 morphology 변화와 전단력하에서 변형이 어려워지기 때문인 것으로 해석하였다.

• Design & Manufacturing
• /
• 제1권1호
• /
• pp.39-44
• /
• 2007

In recent, recycling of plastic material has became a major issue due to the landfills and environmental problem. This study investigated fluidity and hardness of thermoplastic vulcanizate(TPV), which is used for automobile component parts such as weather strip in order to replace ethylene propylene rubber (EPDM). So, using the spiral flow test mold, we conducted an experiment on fluidity and hardness of TPV according to injection molding conditions. As results of injection molding experiment, the recycled TPV's flow length was a little bit longer than virgin TPV and the hardness was decreased in case of using the recycled resin. Also, we investigated the morphology study by SEM photo.

• 소성∙가공
• /
• 제16권4호
• /
• pp.271-275
• /
• 2007

These days, recycling of plastic material has become a major issue due to the landfills and environmental problem. This study investigates the fluidity of thermoplastic vulcanizate(TPV), which can be used for an automobile part such as a weather strip, in order to replace ethylene propylene rubber(EPDM). Injection molding experiments with the spiral flow test mold and panel cover mold are conducted to examine the fluidity of TPV during injection molding. It is found out that the recycled TPV's flow length is a little bit longer than the virgin TPV. However, the filling weight for a panel cover parts by a recycled TPV is almost the same as that by a virgin TPV.

• Journal of Pharmaceutical Investigation
• /
• 제26권3호
• /
• pp.201-205
• /
• 1996

Poloxamer, block copolymers of ethylene oxide and propylene oxide was crosslinked by diisocyanates and triisocyanates to form water-swellable, physically strong, rubber-like elastic, high biocompatible polyurethanes. The isocyanate-hydroxyl stoichiometry was kept 1:1, but the crosslinking density was varied. The variations examined were the ratio of diisocyanate and triisocyanate. The delivery of two drugs of different water solubilities from hydrogel matrices was studied. It appeared that the drug nature greatly influenced its release kinetics possibly due to drug-polymer interactions. The release profiles, however, could be modified to a great extent by adjusting the polymer network structure Generally the high crosslinking density was required for prolonged drug delivery.

• Elastomers and Composites
• /
• 제50권4호
• /
• pp.245-250
• /
• 2015

Recycling of ethylene-propylene-diene terpolymer (EPDM) scrap was tried by blending with polypropylene (PP). EPDM scrap powder was prepared by shear pulverization process at high temperature, which may lead to selective chain scission induced by difference in the critical elastic coefficient. On the other hand, EPDM scrap powder was prepared by adding a selected reclaiming agent during shear pulverization process at high temperature. Terpene as a bonding agent was then introduced to improve adhesion property. PP, used as a matrix for manufacturing thermoplastic elastomer, was modified by the incorporation of dicumyl peroxide and maleic anhydride. The functionalized EPDM and modified PP were blended and cured dynamically at $190^{\circ}C$. The blend materials prepared in this study showed the comparable results to those of conventional TPE in terms of tensile and flow properties. Also, the odor component of recycled EPDM was analyzed using GC-MS.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권12호
• /
• pp.581-585
• /
• 2006

Macro interfaces between two different bulk materials which affect the stability of insulation system exist inevitably in the complex insulation system using in extra high voltage (EHV) electric devices. In this paper, Interface between epoxy and ethylene propylene diene terpolymer (EPDM) was selected as an interface in electrical insulation system and the AC dielectric strength of the interface was investigated. Air compress system was used to give pressure to the interface. Specimens were prepared in various ways to generate different surface conditions for each type of interface. Increasing interfacial pressure, decreasing surface roughness and spreading oil over surfaces improve the AC interfacial dielectric strength. Especially, the dielectric strength was saturated at certain interfacial pressure.

• Elastomers and Composites
• /
• 제26권1호
• /
• pp.15-22
• /
• 1991

Blends of ethylene-propylene-diene terpolymer(EPDM) and high density polyethylene(HDPE) have been prepared in a roll mill by the process "dynamic curing" where both blending and a crosslinking reaction was carried out simultaneously. As a crosslinking agent, dicumyl peroxide(DCP) was used. Throughout the experimental ranges, the dynamically cured polyblends were shown to be thermoplastic elastomers except highly crosslinked blends of high compositions of EPDM. The increase of melt viscosity was observed as EPDM composition and DCP contents increased. From DSC determinations, the crystallinity decreased with increasing contents of DCP. The tensile strength and elongation at break generally increased with increasing DCP content and increasing HDPE compositions, but highly depended on the combined effects of decreasing crystallinity and increasing crosslinking density.

• 폴리머
• /
• 제34권5호
• /
• pp.430-433
• /
• 2010

리튬이온 전지에 사용되는 가스켓 재료는 내전해액성, 전기절연성, 압축 영구 줄음률, 비오염성, 저온성이 요구된다. 가스켓 고무에 적용되는 충전제의 특성을 살펴보기 위하여 EPDM(ethylene propylene diene monomer), NBR(nitrile butadiene), FKM(fluoro elastomers)에 카본블랙 및 실리카계 충전제의 함량을 조정하여 compoud를 만들었다. 이렇게 배합된 compound를 리튬이온 전지의 작동 환경을 고려하여 전해액에 대한 장기평가 및 압축 영구 줄음률, 저온성에 대한 평가를 실시하였다. 본 실험에서는 카본블랙 및 실리카계 충전제를 사용하여 각 충전제에 따른 고무재료의 물리적 화학적 특성에 대하여 검토하였다.