• Polymer(Korea)
• /
• v.27 no.5
• /
• pp.449-457
• /
• 2003

The purposes of this work were the producing of a biodegradable poly($\varepsilon$-caprolactone) (PCL) / poly(ethylene oxide) (PEO) microcapsule and the analyzing of form and features for the manufacturing conditions which could be observed in a prospective drug delivery systems through drug release. The effects of emulsifier, emulsifier concentration, and stirring rate for the diameter and form of the microcapsules were observed using image analyzer and scanning electron microscope. The role of interfacial adhesion between PCL/PEO and drug was determined by contact angle measurements, and the drug release test of the microcapsules was characterized by UV/vis. spectra. As a result, the microcapsules were made in spherical fonns with a mean particle size of 170 nm∼68 $\mu$m. And the work of adhesion between water and PCL/PEO increased with increasing the content of PEO, probably due to the increased the hydrophilicity. It was also found that the drug release rate from the microcapsules significantly increased with increasing the content of PEO, which could be also attributed to the increasing of the hydrophilic groups or the degree of adhesion force at interfaces.

• Polymer(Korea)
• /
• v.24 no.1
• /
• pp.29-37
• /
• 2000

Polyaniline (PANi)/Poly(ethylene of oxide) (PEO) in-situ blends were prepared by inducing phase separation through solvent evaporation after casting from solutions containing aniline monomer, oxidant (initiator), dopant and PEO in methanol/water mixed solvent. It was observed that the electrical conductivity first increases rapidly as PANi amount in the PANi/PEO blend increases and then slowly increases as the weight percentages of polyaniline become above 11 wt% in the blend. We also noted that the morphology of PANi/PEO blends changes when the holding time in a stirrer at constant temperature is varied and eventually affects the electrical conductivity. As the length of alkyl group in dopants increases, the electrical conductivity of doped blends increases. The PANi/PEO blend prepared with a high molecular weight of PEO yields higher electrical conductivity.

• Korean Journal of Food Science and Technology
• /
• v.26 no.3
• /
• pp.272-277
• /
• 1994

The microbial populations of exportable and domestic white ginseng powders, which have been problems in quality control, were higher than the legally-permissive level of microorganisms as $5{\times}10^{4}$/g in total bacteria and as negative coliforms. Various microorganisms contaminated in the sample were effectively decontaminated by gamma irradiation at below 10 kGy as well as ethylene oxide (EO) fumigation. The radiosens.tivity of microorganisms was the highest in coliforms, followed by molds and aerobic bacteria ($D_{10}$: 1.25 kGy). The good microbiological quality could be retained in white ginseng powders for more than 7 months of storage at $30{\pm}2^{\circ}C$ irrespective of relative humidities if products are prepared with a lower moisture content below 10% and treated by gamma irradiation at 5 to 10 kGy in an airtight packaging.

• Proceedings of the KIEE Conference
• /
• 1994.07b
• /
• pp.1229-1232
• /
• 1994

The purpose of this study is to research and develop solid polymer electrolyte(SPE) for Li secondary battery. This paper describes the effects of lithium salts, plasticizer addition and temperature dependence of conductivity of PEO electrolytes. Polyethylene oxide(PEO) based polymer electrolyte films were prepared by solution casting an acetonitrile solution of preweighed PEO and Li salt. After solvent evaporation, the electrolyte films were vacuum-dried at $60^{\circ}C$ for 48h, the thickness of the films were $90{\sim}110{\mu}m$. The conductivity properties of prepared PEO electrolytes are summarized as follows. PEO electrolyte complexed with $LiClO_4$ shows the better conductivity of the others. $PEO-LiClO_4$ electrolyte when $EO/Li^+$ ratio is 8, showed the best conductivity. Optimum operating temperature of PEO electrolyte is $60^{\circ}C$. By adding propylene carbonate and ethylene carbonate to $PEO-LiClO_4$ electrolyte, its conductivity was higher than $PEO-LiClO_4$ without those. Also $PEO_8LiClO_4$ electrolyte remains static up to 4.5V vs. $Li/Li^+$.

• Journal of the Korean Chemical Society
• /
• v.37 no.10
• /
• pp.855-860
• /
• 1993

In the presence of SDS(sodium dodecyl sulfate), effect of $Ca^{2+}$on the interaction of NP-40EO[nonylphenol-(ethylene oxide)40] with iodine in aqueous solution were investigated by UV-visible spectrophotometer. In the presence of SDS, the intensity of interaction peaks were decreased and markedly increased by the addition of $Ca^{2+}$. Decrease of interaction peaks is caused by decrease of EO number to be interact with iodine per unit surface area of mixed micelle to the insertion of SDS and increase is attributed to the compactness of micelle in the presence of $Ca^{2+}$. These phenomena may be explained by the fact that the linear EO (ethylene oxide) chains, to be free in aqueous solution, could form a pseudo-crown ether structures of forming with $Ca^{2+}$ion.

• Journal of the Korean Electrochemical Society
• /
• v.18 no.3
• /
• pp.115-120
• /
• 2015

The mechanical and electrochemical properties of poly(ethylene oxide) (PEO)-coated Rayon separator were characterized using potassium polyacrylate (PAAK)-KOH electrolyte. The supercapacitive properties of activated carbon supercapacitor adopting the Rayon/PEO separator and PAAK-KOH electrolyte was also tested. As the PEO content increased, the mechanical strength increased. Room-temperature ionic conductivity of over $10^{-2}S\;cm^{-1}$ was obtained at the PEO content lower than 5 wt.%, applicable to a supercapacitor. As a result, the specific capacitance at $1000mV\;s^{-1}$ of the activated carbon supercapacitor adopting the Rayon/PEO separator and PAAK-KOH electrolyte was highly stable after 1000th cycle. This was due to high rate-capability provided by the fact that PEO coating could fix the entanglements among fiber filaments of Rayon.

• Korean Journal of Food Science and Technology
• /
• v.34 no.6
• /
• pp.1018-1022
• /
• 2002

Effect of nitric oxide (NO) treatment on physiology and quality characteristics of peaches (Prunus persica L. Batsch) was determined. Peaches were treated for 4 hr with NO (0, 10, 100 ppm) gas under oxygen-free atmosphere at $10^{\circ}C$, packaged with 0.05-mm LDPE film, and stored at $10^{\circ}C$ for 15 days. Treatment with 100 ppm NO reduced the ethylene production and the loss of flesh firmness in peaches, but did not affect soluble solids, titratable acidity, and surface color. Oxygen-free atmosphere induced the reduction of respiration rate and ethylene production. Modified atmosphere packaging retarded the loss of flesh firmness and surface greenness, but decreased soluble solids and titratable acidity regardless of NO treatment.

• Journal of Radiation Industry
• /
• v.8 no.2
• /
• pp.133-140
• /
• 2014

The sterilization of health care products is widely used to choose conventional Ethylene Oxide gas sterilization in South Korea. But the method has brought serious issues because of the toxic residual gas and global warming of $CO_2$ evacuation after the sterilization process. This study is carried out to confirm the application possibility of gamma sterilization instead of Ethylene Oxide in sanitary aid products. Four kinds of products (gauze, menstrual pad, bandage, menstrual tampon) were treated with gamma irradiation of 15 kGy, then analyzed the achievement of the sterility assurance level (SAL) $10^{-6}$ through BI test. The cytotoxicity of accelerated samples of 6 months elapse evaluated by means of colony forming rate at various concentration of the extracts. pH and UV measurements at extract concentrations were tested according to the MFDS (Ministry of food & drug safety) guideline to verify a stability & safety of product sterilized. The results revealed that the extracts did not show any significant changes in cytoxicity assay as well as pH and UV values by gamma sterilization. All extract concentration was observed high cell viability, pH and UV values were calculated within the acceptable range prescribed by the guideline. It indicates that gamma sterilization could effectively substitute for conventional sterilization such as Ethylene Oxide sterilization in the sanitary aid products.

• Journal of Industrial and Engineering Chemistry
• /
• v.68
• /
• pp.42-47
• /
• 2018

This work reports a facile and effective antibacterial coating for oxide substrates. As a coating material, a random copolymer, abbreviated as poly(TMSMA-r-PEGMA), was synthesized by radical polymerization of 3-(trimethoxysilyl)propyl methacrylate (TMSMA) and poly(ethylene glycol) methyl ether methacrylate (PEGMA). Polymeric self-assembled monolayers of poly(TMSMA-r-PEGMA) were formed on various inorganic oxide substrates, including silicon oxide, titanium dioxide, aluminum oxide, and glass, via the simple dip-coating process. The polymer-coated substrates were characterized by ellipsometry, contact angle measurements, and X-ray photoelectron spectroscopy. The bacterial adhesion on the polymer-coated substrates was completely suppressed compared to that on the uncoated substrates.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.5
• /
• pp.755-762
• /
• 2005

A series of catalysts, NiO/$CeO_2-ZrO_2/WO_3$, for ethylene dimerization was prepared by the precipitation and impregnation methods. For NiO/$CeO_2-ZrO_2/WO_3$ sample, no diffraction line of nickel oxide was observed up to 40 wt%, indicating good dispersion of nickel oxide on the surface of catalyst. The hexagonal and monoclinic phases of $WO_3$ up to the calcination temperature of 500 ${^{\circ}C}$ were observed, whereas the hexagonal phase of WO3 completely was transformed into monoclinic phase of $WO_3$ at 600 ${^{\circ}C}$ and above. The role of $CeO_2$ in the catalysts was to form a thermally stable solid solution with zirconia and consequently to give high surface area and acidity. The catalytic activities for ethylene dimerization were correlated with the acidity of catalysts measured by the ammonia chemisorption method. 25-NiO/5-$CeO_2-ZrO_2/15-WO_3$ containing 25 wt% NiO, 15 wt% $WO_3$ and 5 mol% $CeO_2$, and calcined at 400 ${^{\circ}C}$ exhibited a maximum catalytic activity due to the effects of $WO_3$ modifying and $CeO_2$ doping.