• Clinical and Experimental Reproductive Medicine
• /
• 제45권3호
• /
• pp.143-148
• /
• 2018

Objective: The favored method of preserving fertility in young female cancer survivors is cryopreservation and autotransplantation of ovarian tissue. Reducing hypoxia until angiogenesis takes place is essential for the survival of transplanted ovarian tissue. The aim of this study was to investigate the role of angiopoietin-1 (Angpt-1), angiopoietin-2 (Angpt-2), and vascular endothelial growth factor (VEGF) in ovarian tissue grafts that were cryopreserved using two methods. Methods: Ovarian tissues harvested from ICR mice were divided into three groups: group I (control), no cryopreservation; group II, vitrification in EFS (ethylene-glycol, ficoll, and sucrose solution)-40; and group III, slow freezing in dimethyl sulfoxide. We extracted mRNA for VEGF, Angpt-1, and Angpt-2 from ovarian tissue 1 week following cryopreservation and again 2 weeks after autotransplantation. We used reverse transcriptase-polymerase chain reaction to quantify the levels of VEGF, Angpt-1, and Angpt-2 in the tissue. Results: Angpt-1 and Angpt-2 expression decreased after cryopreservation in groups II and III. After autotransplantation, Angpt-1 and Angpt-2 expression in ovarian tissue showed different trends. Angpt-1 expression in groups II and III was lower than in group I, but Angpt-2 in groups II and III showed no significant difference from group I. The vitrified ovarian tissues had higher expression of VEGF and Angpt-2 than the slow-frozen ovarian tissues, but the difference was not statistically significant. Conclusion: Our results indicate that Angpt-2 may play an important role in ovarian tissue transplantation after cryopreservation although further studies are needed to understand its exact function.

• 한국패류학회지
• /
• 제29권3호
• /
• pp.251-258
• /
• 2013

본 연구에서는 굴, Crassostrea gigas의 계획적인 인공종묘생산 및 우량형질의 정자를 보존하기 위하여 냉동보존 시 적정 결빙억제제 (cryprotective agent, CPA) 및 농도를 알아보고자, CPA 종류 및 농도별 독성 및 냉동보존 효과를 파악하고 해동 후 정자의 세포 손상을 조사하였다. CPA 종류 및 농도별 침지시간에 따른 굴 정자의 독성평가를 실시한 결과, 생존율 및 운동성은 DMSO가 가장 좋았으며, 다음으로 EG, glycerol, Methanol 순이었다. 희석액으로 여과해수를 사용하여 CPA 종류 및 농도별 냉동보존 결과, 15% DMSO로 냉동보존 한 정자의 생존율 및 운동성이 가장 높았다. 굴의 냉동/해동 정자를 주사전자현미경으로 관찰한 결과, DMSO, EG, methanol, glycerol 순으로 세포 손상이 적었으며, 농도는 15, 20, 10, 5% 순이었다. 이상의 결과를 종합한 결과, 굴 정자의 냉동보존 시 여과해수를 희석액으로 사용할 경우 적정 CPA는 DMSO이며, 농도는 15%였다.

• 대한임상독성학회지
• /
• 제17권2호
• /
• pp.47-57
• /
• 2019

Purpose: Osmolar gap (OG) has been used for decades to screen for toxic alcohol levels. However, its reliability may vary due to several reasons. We validated the estimated ethanol concentration formula for patients with suspected poisoning and who visited the emergency department. We examined discrepancies in the ethanol level and patient characteristics by applying this formula when it was used to screen for intoxication due to toxic levels of alcohol. Methods: We retrospectively reviewed 153 emergency department cases to determine the measured levels of toxic ethanol ingestion and we calculated alcohol ingestion using a formula based on serum osmolality. Those patients who were subjected to simultaneous measurements of osmolality, sodium, urea, glucose, and ethanol were included in this study. Patients with exposure to other toxic alcohols (methanol, ethylene glycol, or isopropanol) or poisons that affect osmolality were excluded. OG (the measured-calculated serum osmolality) was used to determine the calculated ethanol concentration. Results: Among the 153 included cases, 114 had normal OGs (OG≤14 mOsm/kg), and 39 cases had elevated OGs (OG>14). The mean difference between the measured and estimated (calculated ethanol using OG) ethanol concentration was -9.8 mg/dL. The 95% limits of agreement were -121.1 and 101.5 mg/dL, and the correlation coefficient R was 0.7037. For the four subgroups stratified by comorbidities and poisoning, the correlation coefficients R were 0.692, 0.588, 0.835, and 0.412, respectively, and the mean differences in measurement between the measured and calculated ethanol levels were -2.4 mg/dL, -48.8 mg/dL, 9.4 mg/dL, and -4.7 mg/dL, respectively. The equation plots had wide limits of agreement. Conclusion: We found that there were some discrepancies between OGs and the calculated ethanol concentrations. Addition of a correction factor for unmeasured osmoles to the equation of the calculated serum osmolality would help mitigate these discrepancies.

• 광물과 암석
• /
• 제35권4호
• /
• pp.431-445
• /
• 2022

점토질 암석의 광물함량을 효과적이고 실용적으로 분석하는 방법을 X-선 분말회절분석 실험을 통하여 연구하였다. 점토질 암석의 X-선 분말회절 정량분석을 위해서는 측면마운팅(side mounting) 방법에 의한 무작위 배향(random orientation)의 전암(whole-rock) 분말시료의 준비가 필요하다. 또한, 암석을 구성하고 있는 점토광물의 감정을 위하여 2 ㎛ 이하 점토입도의 배향성 마운트(oriented mount)시편의 준비와 에틸렌글리콜 처리, 열처리 등의 실험과정이 요구된다. 정량분석을 위하여 RIR(reference intensity ratio)방법과 리트벨트(Rietveld) 회절도 계산 방법을 사용하였다. RIR값을 사용하여 전암 X-선 회절도로부터 총 점토 함량과 비점토광물(non-clay minerals)들의 함량을 얻을 수가 있었다. 또한, 점토입도의 배향성 X-선 회절도로부터는 각각 점토광물의 상대함량을 계산하여 이를 총 점토광물에 할당할 수가 있었다. 전암 X-선 회절의 리트벨트 방법에서는 10°(2θ) 미만의 X-선 회절 영역은 제외한 후에 리트벨트 회절도를 계산하였을 때 효과적인 정량분석 값을 얻을 수 있었다. 분석결과는 RIR방법과 리트벨트 방법이 서로 근사한 정량분석 값을 보여주었다. 따라서, 연구결과는 실험실에서의 일상적인 점토질암의 광물정량분석을 성공적으로 수행하는 것이 가능함을 지시한다. 그러나, 점토광물은 화학적 및 구조적 특정이 다른 수많은 변종이 존재하기 때문에 점토질암의 정량분석은 아직도 도전해야 하는 과제이다.

• 한국동물번식학회:학술대회논문집
• /
• 한국동물번식학회 2001년도 춘계학술발표대회
• /
• pp.76-76
• /
• 2001

The objective of this study was to optimize the vitrification method of in vitro produced bovine embryos. Thus, in vitro produced embryos at 8 cell, morula and blastocyst stages were vitrified on electron microscope grids (EM grids) or in open pulled straws (OPS) with EG5.5 (5.5 M ethylene glycol, 1.0 M sucrose and 10% FBS in m-DPBS medium) freezing solution and their survival rates after thawing were compared. The embryos on EM grids or in OPS were briefly exposed to EG5.5 freezing solution and plunged directly into liquid nitrogen within 30 to 35 sec. Post-thawed embryos were serially diluted in 0.5, 0.25 and 0.125 M sucrose in m-DPBS, each for 1 min, and then cultured in CRI aa medium supplemented with 10% FBS. Embryonic survival rate was assessed as re-expanded and hatched rates of those embryos after warming. The rates of re-expansion embryos did not significantly different between EM grid (8 cell: 42.10%, morula: 66.66% and blastocyst: 77.08%) and OPS (8 cell: 47.36%, morula: 61.90% and blastocyst: 83.33%) methods. In addition, the hatched rates in EM grid (8 cell: 31.57%, morula: 57.14% and blastocyst: 72.91%) were similar to those in OPS (8 cell. 34.21%, morula: 50.00% and Blastocyst: 77.08%). Interestingly, even at the same blastocyst stage, the in vitro survival of day 7 embryos (EM grid: 79.48 and OPS: 87.18%) was higher than those of day 8 embryos (EM grid: 72.10 and OPS: 82.06%). The total cell number of blastocyst developed in vitro after vitrification was examined with Hoechst 33342 staining to compare the embryo quality among different treatment groups. The total cell number of blastocyst was not significantly different between vitrified groups (EM grid: 162.4$\pm$8.0 and OPS: 158.4$\pm$7.1) and unvitrified control (168.0$\pm$5.6). These results indicate that both vitrification containers can provide the high rate of embryo survival. Moreover, the OPS container may not need a cap to protect the container from floating after immersion in L$N_2$. Therefore, this study suggest that bovine embryos can be cryopreserved easily, effectively and successfully by vitrification method using EM grid or OPS with EG5.5 freezing solution. In the future, the Pregnancy rate would be investigated after transfer of our vitrified embryos into the appropriated recipients.

• 한국수정란이식학회:학술대회논문집
• /
• 한국수정란이식학회 2002년도 국제심포지엄
• /
• pp.78-78
• /
• 2002

The role of heat shock proteins in shielding organism from environmental stress is illustrated by the large-scale synthesis of these protein by the organism studied to date. However, recent evidence also suggests an important role for heat shock protein in fertilization and early development of mammalian embryos. Effects of elevated in vitro temperature on in vitro produced bovine embryos were analysed in order to determine its impact on the expression of heat shock protein 70 (HSP70) by control and frozen-thawed after in vitro fertilization (IVF) or nuclear transfer (NT). The objective of this study was to assess the developmental potential in vitro produced embryos with using of the various containers and examined expression and localization of heat shock protein 70 after it's frozen -thawed. For the vitrification, in vitro produced embryos at 2 cell, 8 cell and blastocysts stage after IVF and NT were exposed the ethylene glycol 5.5 M freezing solution (EG 5.5) for 30 sec, loaded on each containers such EM grid, straw and cryo-loop and then immediately plunged into liquid nitrogen. Thawed embryos were serially diluted in sucrose solution, each for 1 min, and cultured in CRI-aa medium. Survival rates of the vitrification production were assessed by re-expanded, hatched blastocysts. There were no differences in the survival rates of IVF using EM grid, cryo-loop. However, survival rates by straw were relatively lower than other containers. Only, nuclear transferred embryos survived by using cryo-loop. After IVF or NT, in vitro matured bovine embryos 2 cell, 8 cell and blastocysts subjected to control and thawed conditions were analysed by semiquantitive reverse transcription polymerase chain reaction methods for hsp 70 mRNA expression. Results revealed the expression of hsp 70 mRNA were higher thawed embryos than control embryos. Immunocytochemistry used to localization the hsp70 protein in embryos. Two, 8-cell embryos derived under control condition was evenly distributed in the cytoplasm but appeared as aggregates in some embryos exposed frozen-thawed. However, under control condition, blastocysts displayed aggregate signal while Hsp70 in frozen-thawed blastocysts appeared to be more uniform in distribution.

• 한국가금학회지
• /
• 제41권4호
• /
• pp.261-270
• /
• 2014

동결 닭 PGCs의 생식계열 키메라를 이용한 생체에의 복원을 실용화 하기 위해서는, 닭 PGCs의 동결 보존 기술의 향상에 의해 동결 및 융해 후의 많은 생존 세포를 확보하는 것과, 생식계열 키메라의 제작 효율을 높이는 것이 반드시 필요하다. 닭 PGCs는 배양 5.5~6일령의 닭 원시 생식선으로부터 채취하고, MACS 방법에 의해서 순수 닭 PGCs를 분리했다. 15% 각각의 EG와 DMSO를 동결 보호제로 사용한 처리군이 각 군의 농도에 상관없이 유의적(p<0.05)으로 PG 처리군보다 동결 및 융해 후의 세포의 생존율이 높음을 확인하였다. 특히, 10% EG+FBS 조합의 처리군에서 상업용 닭인 한협육종협회3호종(B : 88.7%)이 오계종(A : 85.1%), 아사 브라운종(C : 84.6%) 그리고 화이트 레그혼종(D : 85.9%)의 세 품종보다 동결 및 융해 후의 닭 PGCs의 생존율이 유의적(p<0.05)으로 높음을 확인하였다. 간이 동결에 있어서 가장 높은 생존율을 보인 10% EG이 10% DMSO와 함께 최적의 동결 보호제로서 사용 가능성을 확인하였다.

• 한국가금학회지
• /
• 제41권4호
• /
• pp.249-259
• /
• 2014

동결 닭 원시 생식 세포의 생식계열 키메라를 이용한 생체에의 복원을 실용화 하기 위해서는, 닭 원시 생식 세포의 동결 보존 기술의 향상에 의해 동결 및 융해 후의 많은 생존세포를 확보하는 것이 반드시 필요하다. 닭 원시 생식 세포는 배양 5.5일령의 닭 원시 생식선으로부터 채취하고, MACS 방법에 의해서 순수 닭 원시 생식 세포를 분리했다. 15% 각각의 EG를 동결 보호제로 사용한 처리군이 각 군의 농도에 상관없이 유의적(p<0.05)으로 PG 처리군보다 동결 및 융해 후의 세포의 생존율이 높음을 확인하였다. 특히, 동결 보호제로 10% EG를 이용한 유리화 처리군에서 85.63%로 동일한 농도의 PG 처리군(66.81%)보다 유의적(p<0.05)으로 가장 높은 생존율을 보였다. 한편, 10% EG를 이용한 완만 동결 처리군에서 66.14%로 동일한 농도의 PG 처리군(50.11%)보다 유의적(p<0.05)으로 가장 높은 생존율을 보였다. 이상의 결과들로부터 유리화 동결에 있어서 가장 높은 생존율을 보인 10% EG이 최적의 동결 보호제로서 사용 가능함을 확인하였고, 이는 한국재래닭(오계)의 원시 생식 세포의 동결 보존의 실용화가 보다 더 향상될 수 있는 또 하나의 방법이 될 수 있음을 시사한다.

• Clinical and Experimental Reproductive Medicine
• /
• 제24권3호
• /
• pp.347-353
• /
• 1997

본 실험은 초자화 동결된 생쥐 배반포기배의 융해 후 배양조건 및 이식방법이 난자의 생존에 미치는 효과를 조사하고자 실시하였다. 체외수정후, M16배양액에서 4일동안 배양하여 얻어진 생쥐 배반포기배는 EFS40 (40% ethylene glycol, 18% Ficoll, 0.5 M sucrose가 함유된 PBS)으로 초자화동결하였다. 실험 I에서는 융해 후 배양조건에 따른 난자들의 체외/체내 생존율을 조사하였다. 융해된 난자가 M16과 4 mg/ml 소혈청알부민과 20 가지 아미노산이 함유된 m-CR1 (2% BME 아미노산 용액, 1% MEM 아미노산 용액) 및 단층배양이 유도된 난구세포 (10% FBS가 함유된 m-CR1배양액)에서 각각 배양되었을 때, 융해 후 24시간째 체외 생존율은 배양조건에 따라 차이가 없었다(75.6, 83.1, 82.4%). 그러나 체내 발달율에 있어서 임신 15일째 생존 산자율은 39.0, 49.0, 38.1%로서 유사한 성적을 나타냈으나, 전체 착상율에 있어서는 m-CR1 (80.4%)에 배양되었을 때, M16 (51.2%), 난구세포와 공배양시 (57.1%)보다 유의하게 높은 생존율을 보였다(p<0.05). 실험 II에서는 수정란 이식 방법에 따른 체내 발달율을 조사하였다. 배반포기배를 융해 후 체외배양없이 곧바로 가임신 2, 3일째 대리모에 이식을 실시하였을 때, 가임신 2일째 대리모에서는 임신징후를 얻지 못하였고, 가임신 3일째 대리모에서는 50.0%의 착상율과 15.4%의 정상산자율을 얻었다. 그러나, 이러한 결과는 융해 후, 16시간 배양하여 가임신 3일째 대리모에 이식 (73.5, 57.1%)하는 경우보다 유의하게 낮은 결과였다(p<0.05). 실험 III에서는 초자화 동결된 배반포기배의 융해 후 배양시 발달이 늦어진 수정란의 이용효율을 극대화시키기 위해 융해한 4일째 초기, 5일째 초기, 5일째 팽창 배반포기배의 체외/체내 생존율을 조사하였다. 가장 높은 체외 생존율은 5일째 팽창 배반포기배 (78.3%)에서 얻었으나, 체내 발달율 (산자율, 착상율)에 있어서는 4일째 초기 배반포기배 (33.3, 66.7%)의 경우가, 5일째 팽창 배반포기배(29.0, 38.7%)의 경우보다 높았다(p<0.05). 따라서 본 연구의 결과는 배양조건과 수정란 이식방법에 따라 초자화 동결된 배아의 체외/체내 발달율을 높일 수 있으며, 발달이 늦은 배반포기배의 체내 발달율은 체외 배양시간이 길어질수록 낮아짐으로, 5일째 팽창 배반포기배보다 4일째 초기 배반포기배를 동결하는 것이 더 유용하다는 것을 알 수 있었다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제36회 춘계학술대회논문집
• /
• pp.1-2
• /
• 2011

Hybrid rockets have lately attracted attention as a strong candidate of small, low cost, safe and reliable launch vehicles. A significant topic is that the first commercially sponsored space ship, SpaceShipOne vehicle chose a hybrid rocket. The main factors for the choice were safety of operation, system cost, quick turnaround, and thrust termination. In Japan, five universities including Hokkaido University and three private companies organized "Hybrid Rocket Research Group" from 1998 to 2002. Their main purpose was to downsize the cost and scale of rocket experiments. In 2002, UNISEC (University Space Engineering Consortium) and HASTIC (Hokkaido Aerospace Science and Technology Incubation Center) took over the educational and R&D rocket activities respectively and the research group dissolved. In 2008, JAXA/ISAS and eleven universities formed "Hybrid Rocket Research Working Group" as a subcommittee of the Steering Committee for Space Engineering in ISAS. Their goal is to demonstrate technical feasibility of lowcost and high frequency launches of nano/micro satellites into sun-synchronous orbits. Hybrid rockets use a combination of solid and liquid propellants. Usually the fuel is in a solid phase. A serious problem of hybrid rockets is the low regression rate of the solid fuel. In single port hybrids the low regression rate below 1 mm/s causes large L/D exceeding a hundred and small fuel loading ratio falling below 0.3. Multi-port hybrids are a typical solution to solve this problem. However, this solution is not the mainstream in Japan. Another approach is to use high regression rate fuels. For example, a fuel regression rate of 4 mm/s decreases L/D to around 10 and increases the loading ratio to around 0.75. Liquefying fuels such as paraffins are strong candidates for high regression fuels and subject of active research in Japan too. Nakagawa et al. in Tokai University employed EVA (Ethylene Vinyl Acetate) to modify viscosity of paraffin based fuels and investigated the effect of viscosity on regression rates. Wada et al. in Akita University employed LTP (Low melting ThermoPlastic) as another candidate of liquefying fuels and demonstrated high regression rates comparable to paraffin fuels. Hori et al. in JAXA/ISAS employed glycidylazide-poly(ethylene glycol) (GAP-PEG) copolymers as high regression rate fuels and modified the combustion characteristics by changing the PEG mixing ratio. Regression rate improvement by changing internal ballistics is another stream of research. The author proposed a new fuel configuration named "CAMUI" in 1998. CAMUI comes from an abbreviation of "cascaded multistage impinging-jet" meaning the distinctive flow field. A CAMUI type fuel grain consists of several cylindrical fuel blocks with two ports in axial direction. The port alignment shifts 90 degrees with each other to make jets out of ports impinge on the upstream end face of the downstream fuel block, resulting in intense heat transfer to the fuel. Yuasa et al. in Tokyo Metropolitan University employed swirling injection method and improved regression rates more than three times higher. However, regression rate distribution along the axis is not uniform due to the decay of the swirl strength. Aso et al. in Kyushu University employed multi-swirl injection to solve this problem. Combinations of swirling injection and paraffin based fuel have been tried and some results show very high regression rates exceeding ten times of conventional one. High fuel regression rates by new fuel, new internal ballistics, or combination of them require faster fuel-oxidizer mixing to maintain combustion efficiency. Nakagawa et al. succeeded to improve combustion efficiency of a paraffin-based fuel from 77% to 96% by a baffle plate. Another effective approach some researchers are trying is to use an aft-chamber to increase residence time. Better understanding of the new flow fields is necessary to reveal basic mechanisms of regression enhancement. Yuasa et al. visualized the combustion field in a swirling injection type motor. Nakagawa et al. observed boundary layer combustion of wax-based fuels. To understand detailed flow structures in swirling flow type hybrids, Sawada et al. (Tohoku Univ.), Teramoto et al. (Univ. of Tokyo), Shimada et al. (ISAS), and Tsuboi et al. (Kyushu Inst. Tech.) are trying to simulate the flow field numerically. Main challenges are turbulent reaction, stiffness due to low Mach number flow, fuel regression model, and other non-steady phenomena. Oshima et al. in Hokkaido University simulated CAMUI type flow fields and discussed correspondence relation between regression distribution of a burning surface and the vortex structure over the surface.