• Journal of Welding and Joining
• /
• 제25권3호
• /
• pp.45-50
• /
• 2007

The present study is devoted to investigate the transient flow and to estimate the filling time fur underfill process by using the numerical model established on the fluid momentum equation. For optimization of the design and selection of process parameters, this study extensively presents an estimation of the filling time in the view points of some important factors related to underfill materials and flip-chip geometry. From the results, we conclude that the filling time changes with respect to the under fill materials because of different viscosity, surface tension coefficient and contact angle. It reveals that, as the gap height increases, the filling time decreases substantially, and goes to the saturated values.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.579-584
• /
• 2007

대두유로부터 생산된 바이오디젤과 바이오디젤 혼합 연료유를 대상으로 지방산메틸에스터 함량과 화학적 분석을 통해 산화 특성과 오일의 수명 예측 연구를 수행하였다. 바이오디젤, 경유, BD5, BD20은 산화가 진행될수록 산가(Acid number), 동점도(Kinematic Viscosity) 및 밀도(Density)는 증가하였다. 산가 측정결과의 활용에 의해 임의의 온도조건에서 정확한 사용수명을 예측하기 위하여 화학속도론에 의거하여 각각의 연료에 대한 사용수명식을 도출하였다. 도출된 사용수명식으로부터 바이오디젤이 가장 빠르게 산화가 진행되었고 바이오디젤 혼합량이 증가할수록 사용수명이 단축되는 것을 확인할 수 있었다.

• New & Renewable Energy
• /
• 제3권2호
• /
• pp.17-23
• /
• 2007

대두유로부터 생산된 바이오디젤과 바이오디젤 혼합 연료유를 대상으로 지방산메틸에스터 함량과 화학적 분석을 통해 산화 특성과 오일의 수명 예측 연구를 수행하였다. 바이오디젤, 경유, BD5, BD20은 산화가 진행될수록 산가(Acid number), 동점도(Kinematic Viscosity) 및 밀도(Density)는 증가하였다. 산가 측정결과의 활용에 의해 임의의 온도조건에서 정확한 사용수명을 예측하기 위하여 화학속도론에 의거하여 각각의 연료에 대한 사용수명식을 도출하였다. 도출된 사용수명식으로부터 바이오디젤이 가장 빠르게 산화가 진행되었고 바이오디젤 혼합량이 증가할수록 사용수명이 단축되는 것을 확인할 수 있었다.

• Journal of the Korean Wood Science and Technology
• /
• 제48권3호
• /
• pp.291-302
• /
• 2020

As the properties of the melamine-urea-formaldehyde (MUF) resins were changing during their storage time, this study investigated the impacts of the synthesis method and melamine content of the MUF resins on the pH, apparent viscosity, molecular weights, and crystallinity to estimate these properties over storage times of up to 30 days. Melaminesat three addition levels (5, 10, and 20 wt% based on the resin solids) were simultaneously reacted with urea and formaldehyde (MUF-A resins), while those at the same addition levels were first reacted with formaldehyde and then with urea(MUF-B resins). The pH values of the MUF-A and MUF-B resins decreased linearly as the storage time increased; the apparent viscosity increased linearly for the low melamine contents (5% and 10%) but increased exponentially for 20%. As anticipated, the molecular weights (Mw and Mn) increased linearly with the storage time, with a steeper increase in the Mw of the MUF-B resins compared with that of the MUF-A resins. The crystallinity of the two resin types decreased with storage time at higher melamine content. The relationships between these properties and the storage time made it possible to estimate the property changes in these resins synthesized by the different synthesis methods and melamine contents; this could help predict the properties of such resins in the industry during their storage.

• The Bulletin of The Korean Astronomical Society
• /
• 제36권2호
• /
• pp.107.2-107.2
• /
• 2011

Most astrophysical systems are turbulent and magnetized. Magnetic field plays an important role in the dynamics of astrophysical system and influence all of properties of astrophysical system. Therefore, information of magnetic field is very important to understand properties of astrophysical system. One way to obtain information of magnetic field is to use rotation measure. Mean strength of the magnetic field along the line of sight can be estimated from RM/DM, where RM is rotation measure and DM is dispersion measure. For the estimation of magnetic field strength using RM/DM, the correlation between density and magnetic field. When there is no correlation between density and magnetic field the relation gives exact mean magnetic strength. But if the positive correlation, it overestimates the magnetic field strength, while if the correlation is negative, it underestimate the magnetic field strength. In general, the ICM (intracluter medium) and the ISM (interstellar medium) cases, viscosity has a value greater than magnetic diffusion. We performed compressible MHD turbulence simulations and we studied correlation between density and magnetic field in different values of viscosity and magnetic diffusion. In most cases, we found weak or negative relations between the density and magnetic fields. We discuss implication of our results.

• The Journal of the Korean dental association
• /
• 제15권8호
• /
• pp.617-621
• /
• 1977

In order to comparatively observe the salivary cariogenic factors contributing to permanent tooth caries development in each sexes of Korean, the author performed estimation of unstimulated and stimulated salivary flow rates, salivary viscosity test, and salivary buffering capacity test in 50 males and 50 females Koreans aged form the age 20 to 29. Thereafter, the data from the four kinds of caries activity test were analysed and evaluated comparatively. The obtained results were as follows. 1. Unstimulated salivary flow rate for five minutes was 2.2ml in males and 1.7ml in females but the sexual difference was not significant statistically. 2. Stimulated salivary flow rate for five minutes was 7.1ml in males and 4.8ml in females. 3. Salivary viscosity was 1.9 in males and 1.7 in females but the sexual diffrence was not significant statistically. 4. Salivary buffering capacity was 8.5 drops in males and 6.7 drops in females 5. It seems the stimulated salivary flow rate and buffering capacity to be the anti-cariogenic factors in the occurrence of permanent tooth caries in Koreans.

• Journal of the Korea institute for structural maintenance and inspection
• /
• 제16권4호
• /
• pp.122-129
• /
• 2012

In this study, environmental problems(i.e., pH elevation and $Cr^{6+}$ detection) occurred by using the cement grout made from CA(calcium aluminate) were evaluated using viscosity agents(MC, chelate polymer). Ordinary portland cement and blaste-furnace slag cement were used by main materials and ACC(blended mixture of calcium aluminate) were used by accelerator for hardening of grout. In addition, viscosity agents were used for preventing pH elevation and heavy metal detection from grouting materials. From the results, it was noted that when chelate polymer was used, pH elevation and $Cr^{6+}$ detection were minimized. However, other cases showed higher pH elevation and $Cr^{6+}$ detection. At test 1 day, $Cr^{6+}$ detection with age presented over 97% of total value and, after that, additional increase was not distinct. As a result of this study, it was acknowledged that, to control pH elevation and heavy-metal (like $Cr^{6+}$) detection, the usage of BSC and chelate polymer is a very useful fact.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• 제56권1호
• /
• pp.71-80
• /
• 2007

A control approach for the sensorless speed control of interior permanent magnet synchronous motor(IPMSM) based on adaptive integral the binary is proposed. With a main loop regulator and an auxiliary loop regulator, the binary observer has a property of the chattering alleviation in the constant boundary layer. However, the width of the constant boundary limits the steady state estimation accuracy and robustness. In order to improve the steady state performance of the binary observer, the binary observer is formed by adding extra integral augmented switching the hyperplane equation. By mean of integral characteristics, the rotor speed can be finely estimated and utilized for a sensorless speed controller for IPMSM. The proposed adaptive integral binary observer applies an adaptive scheme, because the parameters of the dynamic equations such as the machine inertia or the viscosity friction coefficient is not well known and these values can be easily changed generally during normal operation. Therefore, the observer can overcome the problem caused by using the dynamic equations, and the rotor speed estimation is constructed by using the Lyapunov function. The experimental results of the proposed algorithm are presented to demonstrate the effectiveness of the approach.

• Journal of Electrical Engineering and Technology
• /
• 제4권2호
• /
• pp.240-248
• /
• 2009

An approach to control the position for an interior permanent magnet synchronous motor (IPMSM) based on an adaptive integral binary observer is described. The binary controller with a binary observer is composed of a main loop regulator and an auxiliary loop regulator. One of its key features is that it alleviates chatter in the constant boundary layer. However, steady state estimation accuracy and robustness are dependent upon the thickness of the constant boundary layer. In order to improve the steady state performance of the binary observer and eliminate the chattering problem of the constant boundary layer, a new binary observer is formed by adding extra integral dynamics to the existing switching hyperplane equation. Also, the proposed adaptive integral binary observer applies an adaptive scheme because the parameters of the dynamic equations such as the machine inertia and the viscosity friction coefficient are not well known. Furthermore, these values can typically be easily changed during normal operation. However, the proposed observer can overcome the problems caused by using the dynamic equations, and the rotor position estimation is constructed by integrating the rotor speed estimated with a Lyapunov function. Experimental results obtained using the proposed algorithm are presented to demonstrate the effectiveness of the approach.

• The Journal of the Korean dental association
• /
• 제15권2호
• /
• pp.145-151
• /
• 1977

The author performed Snyder test, estimation of salivary flow rate, salivary viscosity test, salivary buffering capacity test, M-R test, oral hygiene ability test, estimation of oral glucose clearance time and plaque reformation test in the 107 male Koreans aged form the age of 20 to 29, in order to detect and control the active cariogenic factors contributing to caries development on the individual basis. Thereafter, the data from 8 kinds of caries activity test were analysed and evaluated. The obtained results were as follows: 1. Snyder test was positive in 86.0% of total tested persons, and among those showing positive Snyder test reaction, slight caries activity was appeared in 39.1%, moderate caries activity in 23.9%, and marked caries activity in 37.0%. 2. Salivary flow rate was under the average flow amount in 53.3%. 3. Salivary buffering capacity was low in 22.4%. 5. Buffering capacity of dental plaque was high in 12.5%. 6. Oral hygiene ability was insufficient in all persons tested. 7. Oral glucose clearance time was long in 42.1%. 8. Plaque reformation rate was high in 8.4% of the 107 persons tested.