• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.85-86
• /
• 2002

For rheology investigation of lubricating oils, first phase diagrams were made from determined free volume based on density measurements and the temperature-pressure relation was estimated using the expansion coefficient of free volume and the temperature-pressure relation of the viscoelastic transition point. Next, the authors proposed the density-pressure-temperature relation and the viscosity-pressure-temperature relation of the tested oils based on the free volume and the phase diagrams. Moreover, it was shown that the Ehrenfest equation or the gradient of the phase diagram is closely related to the expansion coefficient of free volume.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1997년도 춘계학술발표회논문집(2)
• /
• pp.341-344
• /
• 1997

A vitrification process is under development in KEPRI for the treatment of low-and medium-level radioactive waste. Although the project is for developing and building Vitrification Pilot Plant in Korea, one of KEPRI's concerns is the quality control of the vitrified glass. This paper discusses a methodology for the estimation of glass composition by on-line measurement of molten glass properties, which could be applied to the plant for real-time quality control of the glass product. By remotely measuring viscosity and density of the molten glass, the glass characteristics such as composition can be estimated and eventually controlled. For this purpose, using the database of glass composition vs. physical properties in isothermal three-component system of SiO$_2$-Na$_2$O-B$_2$O$_3$, a software TERNARY has been developed which determines the glass composition by using two known physical properties(e.g. density and viscosity).

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1220-1223
• /
• 2003

The UV nanoimprint technology uses the UV light as the energy source. Because the imprint process is carried out in room temperature and low pressure, this technology has its own merits compared to the thermal nanoimprint. However, in UV nanoimprint technology, a resin which has low viscosity is essential for the improvement of accuracy. In this research, a resin (named as IMS01) which has relatively low viscosity was developed. And a measurement system was developed in order to measure the degree of cure of the resin. The measurement system which is composed of FT-IR, UV light source and optical guide can measure the degree of cure in real time. From the experimental results, it was found that the IMS01 is cured more rapidly than existing resin (PAK01).

• 한국산학기술학회논문지
• /
• 제16권1호
• /
• pp.877-887
• /
• 2015

본 연구진은 사출성형 공정에서 적용되는 미지 시료 및 고점도의 복합소재 점도를 추정하기 위한 새로운 방법을 제시한 바 있다. 본 논문에서는 사출성형 금형 캐비티 내압을 측정하는 장치를 개발하였다. 이는 사출성형 공정 중의 금형 내를 흐르는 용융체의 압력을 실시간으로 측정하고, 이를 CAE 해석 결과로부터 모사된 압력과 비교함으로써 CAE D/B내의 점도 데이터의 정확성을 검증할 수 있게 한다. 본 연구에서 사용한 재료는 PP(Polypropylene), PP/LGF30%(Polypropylene과 long glass fiber 50% composite), PA66/LGF50%(Polyamide 6,6와 long glass fiber 50% composite) 이다. 여기서 PP와 PP장섬유복합재료는 이미 점도 데이터가 구축되어 있으나, PA66장섬유복합재료는 새롭게 개발한 재료로써 기존의 점도 데이터가 없기에 본 시스템을 이용해서 새로운 점도 곡선을 추정하였다. 그리고, 일반 점도 측정장치로 구한 점도 곡선과도 비교하였다. 한편, 이미 점도 데이터를 갖고 있는 경우인 PP는 신뢰성을 확인할 수 있었으나, PP/LGF50%의 경우는 높은 점도와 구조의 복잡성으로 인해 기존 점도 데이터의 개선이 필요하였다.

• 한국도로학회논문집
• /
• 제4권1호
• /
• pp.149-159
• /
• 2002

본 연구에서는 아스팔트 바인더의 절대점도, 동점도, 침입도, 연화점, PG 고온등급을 이용하여 샌드아스팔트 흔합물의 고속 직접인장강도(DTS1), 저속 직접인장강도(DTS2), 간접인장강도(ITS), 회복탄성계수(MR), 강성지수(SI)를 추정하기 위한 연구를 수행하였다. 여러 가지 혼합물의 특성 중 DTS2가 가장 상관성이 높게 나타났으며 그 다음이 DTS1, ITS, SI, MR 순인 것으로 나타났다. 바인더 성질 중에는 PG 등급이 DTS2와 가장 높은 상관 관계를 보여 PG 고온등급이 높은 바인더를 사용하면 직접인장강도가 어느 정도 우수한 혼합물을 얻을 수 있음을 알 수 있었다. 하지만 각각의 물리적 성질만으로는 신뢰도가 낮아 종합적으로 여러 물성을 이용하여 상관성을 분석하였다. 그 결과 직접 및 간접인장강도는 결정계수가 0.99 이상인 모델을 얻을 수 있었다. 그리고 MR, SI 값의 추정치 모델도 R2이 0.91 및 0.93 이상이어서 상당한 신뢰성을 가지고 물성으로부터 역학적 특성을 추정할 수 있음을 보여준다.

• 한국안전학회지
• /
• 제13권2호
• /
• pp.76-87
• /
• 1998

This study was carried out to investigate the effect of on temperature control from actuating method, recycling ratio and the position (top, middle and bottom) of set and controlled temperature within the reactor in adiabatic ebullated recycling condition, when the disturbance was occurred. Estimation of the solution were performed numerically using the finite difference method. It was assumed that the reaction is in constant with heat of reaction and the physical properties(density, heat capacity and viscosity, etc) of the reactants are same condition within the reactor.

• 호남수학학술지
• /
• 제36권4호
• /
• pp.755-766
• /
• 2014

In the discrete formulation of the bubble stabilized Legendre Galerkin methods, the system of equations includes the artificial viscosity term as the parameter. We investigate the estimation of this parameter to get the optimal solution which minimizes the maximum error. Some numerical results are reported.

• 소성∙가공
• /
• 제9권4호
• /
• pp.356-361
• /
• 2000

In this study, when a square cup is under drawing, blank holder pressure necessary for flange wrinkling prevention was experimentally studied. The materials used in the experiment were SPCC steel and SUS304 and the drawing ratio was 1.62∼2.0. Two cases for lubricantion condition were investigated. One was without lubricant and the other was with lubricant of high viscosity.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.1712-1717
• /
• 1991

The paper describes estimation errors of unsteady flowrate measurements due to parameter changes in a quasi-remote instantaneous flowrate measurement method (abbreviate as QIFM) and an instantaneous flowrate measurement method using two points pressure measurements (abbreviate as TPFM). By introducing error performance index, the influence of parameter changes on the accuracy, and dynamic response of the estimated unsteady flowrate are evaluated. Of four parameters, the variation of the length of the pipeline and speed of sound produce large errors in the estimated unsteady flowrate during transient periods. The effect of kinematic viscosity of the working fluid(oil) is relatively insensitive in unsteady flowrate estimation.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권6호
• /
• pp.962-971
• /
• 2004

This paper has dealt with thermo-physical properties of microencapsulated phase change material slurry as a latent heat storage material having a low melting point. The measured results of the thermo-physical properties of the test microencapsulated phase change material slurry, those are, density, specific heat, thermal conductivity and viscosity, were discussed for the temperature region of solid and liquid phases of the dispersion material (paraffin). The measurements of these properties of microencapsulated phase change material slurry have been carried out by using a specific-gravity meter, a water calorimeter, a differential scanning calorimeter(DSC), a transient hot wire method and rotating type viscometer, respectively. It was clarified that the additional properties law could be applied to the estimation of the density and specific heat of microencapsulated phase change material slurry and also the Euckens equation could be applied to the estimation of the thermal conductivity of this slurry.