• 한국농림기상학회지
• /
• 제3권1호
• /
• pp.5-15
• /
• 2001

논의 시기별 파장별 분광반사특성을 조사하기 위해, Landsat TM 밴드, RVI, 습윤도의 특성을 분산분석한 결과, 가시광선 영역의 TM 밴드 1, 2, 3의 논지역 평균 자료값은 식물색소에 의한 광흡수와 관련이 많아 군락형성이 최대인 8월 19일과 9월 1일에 가장 낮아졌다가 등숙기인 9월 중 하순에 다시 높아졌다. 중간 적외선 영역인 TM 밴드 5와 7은 수분에 민감하여, 담수상태로 수체의 영향이 컸던 5월 31일과 6월 2일의 자료값이 가장 낮았고, 군락의 최성기에서 성숙기로 접어들면서 식물체의 수분함량이 줄어들어 자료값이 점점 높아졌다. 한편, RVI는 출수ㆍ개화기인 8월 19일과 9월 1일에 가장 높았고, 습윤도는 벼의 생육초기에서 성숙기로 갈수록 계속 낮아졌다. 이앙기인 5월 31일, 출수기인 8월 19일 두시기 자료에서 수분에 민감한 TM 밴드 5, 식생의 특징이 드러나는 RVI, 또한 모든 밴드의 특성이 포함된 습윤도를 벼 재배면적 추정을 위한 정보로 이용하여, 이앙기에 담수상태이고 같은 지역이 출수기에 무성한 식생의 특징을 보이는 곳을 벼 재배지역으로 정하여 벼 재배면적 지도를 작성하였다. 벼 재배면적은 7291.19ha 추정되었고, 지형도를 이용한 100지점의 정확도 검증 결과 92%로 나타났다. 1991년 5월 31일과 8월 19일 두 시기의 Landsat TM 밴드 3, 4, 5, RVI 및 습윤도를 각각 유효밴드로 선정하여 중첩한 총 10개의 밴드를 가진 화상을 생성하여 기존의 분류법에 이용하였다. 최대우도법에 의한 감독분류 결과 벼 재배면적은 9100.98 ha였다. Error matrix에 의한 분류정확도는 97.2%로 나타났고, 지형도를 이용한 정확도는 95%로 나타났다. 분류항목수를 15개와 20개로 한 ISODATA법에 의한 비교사 분류결과 벼 재배면적이 각각 6663.60ha와 5704.56 ha로 추정되었고, 지형도에 의한 분류정확도는 각각 87%와 82%로 나타났다. 통계연보를 기준자료로 하여 분류방법간 비교를 위하여 당진군 우강면에 대하여 벼 재배면적 비교를 한 바 감독분류에 의해 2522.97ha로 가장 크게 추정되었고, 다음이 규칙기반분류와 분류항목수를 20으로 한 무감독분류법으로 각각 1567.31 ha와 1865.61 ha로 추정되었다. 분류항목수를 15로 한 무감독분류에 의한 벼 재배면적이 1638.72 ha로 가장 작게 추정되었다. 이때, 통계연보 자료상의 우강면의 논면적(2242.69ha)에 가장 가깝게 추정된 결과는 규칙기반분류이었다. 벼 재배지역은 추정방법에 관계없이 이앙기와 출수기, 두 시기의 자료를 이용한 경우 다소 차이는 있으나 정확하게 구분되었다. 위성의 분광반사 특성을 이용한 규칙기반분류는 매우 쉽고, 재현성이 있으며, 넓은 지역에 대한 신속한 작업이 가능하다.

• Journal of Preventive Medicine and Public Health
• /
• 제29권4호
• /
• pp.801-814
• /
• 1996

연구배경 : 약물복용에 관한 엄격한 규제가 없는 국내 의료현실상, 각종 건강에 관련된 약물이 범람하고 있어 약물 오 남용에 따른 심각한 약물부작용의 발생 가능성이 클 것으로 추정된다. 이에 건강한 성인 남성에서 영양제, 한약을 포함한 자가약물복용에 따라 간 기능 장애를 유발하는지를 코호트 내 환자-대조군 연구로 알아보았다. 방법 : ' 서울코호트' 대상자 중 (1)1990년도 정기 건강검진의 혈청결과상 HBsAg이 음성이면서 AST, ALT 모두 40 IU/L 이하인 대상자 (2) 1990년도 입원진료청구 전산자료상 간질환을 포함한 각종 질병으로 수진받은 적이 없는 자 (3)설문서 응답내용상 1991년 한해 동안 각종 질병이 발생되어 해당 약물을 복용한 적이 없는 자 (4)1992년도 정기 건강검진상 종합소견이 정상이면서 혈청검사상 HBsAg 음성인 자로 국한하여 본 연구를 위한 새로운 코호트를 구축하였다. 2년간의 추적조사 결과 1992년도 검사치상 AST/ALT 모두 40 IU/L 이상이면서 1990년도 AST/ALT에 비하여 100%이상 상승한 경우를 '간효소치 상승군(case group)'으로 정하였고, 반대로 1992년도 검사치상 AST/ALT 모두 40 IU/L 미만이면서 1990년도 ALT/ALT 에 비하여 상승 정도가 100% 미만인 경우를 '대조군(control group)'으로 하여, 약물복용과의 관련성을 카이자승법과 로지스틱 회귀법으로 알아보았다. 결과 : '간기능치 상승군(n=30)'은 대조군(n=2,625)' 에 비하여 44세 이하가 많았고, 경제수준이 높았으며 보다 비만하였으나 교육수준, 직업, 가족력, 수술력, 방사선 촬영력, 침구이용력, 흡연 및 음주습관에서 차이가 없었다. 약물복용에 있어서는 간장제와 한약복용은 차이가 없었으나, 스쿠알렌, 알로에 등의 건강보조식품 복용력은 '간기능치 상승군'에서 유의하게 많았다. 단변수 분석에서 유의성을 보인 변수들을 보정하여 보았을 때도 건강보조식품 복용력은 여전히 통계적 유의성을 잃지 않았다. 결론 : 본 연구결과는 건강인이라 하더라도 '건강보조식품'의 임의 복용은 간기능 장애를 유발할 가능성이 있다고 보아진다. 따라서 현재 '건강보조식품'의 사용이 급증하는 추세 속에서 치료제가 아닌 보조식품으로써의 '건강보조식품'이라 하더라도 장기간 임의 복용에 따라 어떤 부작용이 얼마나 발생할 것인지에 대한 연구가 향후 이루어져야 할 것으로 판단된다.

• 한국화재소방학회논문지
• /
• 제18권1호
• /
• pp.54-66
• /
• 2004

본 논문은 도시 가스 지하배관의 위험관리체계를 유지하는데 필요한 요소들 중 배관의 위험성평가에 적절한 기법을 제안하고, 그 평가결과에 근거하여 가장 비용-효과가 큰 배관 유지관리방안을 찾아내는데 그 목적이 있다. 본 연구에서 제안된 지하배관의 위험성서열화의 접근방법은 세 가지 측면에서 행하여졌는데, 첫째는 RBI(Risk Based Inspection)으로서 배관의 위험도에 영향을 주는 주변인구조건, 관의 크기 및 두께. 사용시간 등을 기준으로 일차적 평가를 함으로서 노출위험도의 높고 낮음을 정성적으로 평가하였고, 둘째는 Scoring System으로서 매설된 배관의 환경적인 요소에 기초하여 점수화하여 구체적으로 위험도를 서열화 하였다. 셋째로는 THOMAS 이론으로부터 대상배관의 누출빈도를 정량화 하였다. 그 결과 도시 가스 대상배관의 노출위험도는 대략 중간이상의 값을 갖는 것으로 나타났으며, 제안된 SPC기법을 적용하여 위험성을 평가한 결과, 대상배관의 부식위험성 점수 값이 허용범위(30-70)에 골고루 분포하는 것으로 보아 설정된 평가기준이 실제배관에 대해 상대적인 부식위험성을 잘 서열화 됨을 알 수 있었다. 또한 THOMAS모델을 적용한 평가결과로서의 Score값은 배관의 길이를 포함한 여러 치수들에 무관한 환경요인에 관련된 값인 반면, 기본누출빈도는 배관의 길이를 포함해서 다른 치수들에 비례함을 보여주고 있다. 그 결과 점수 값이 상대적으로 적은 배관구간(상대적으로 위험성이 낮은 구간)도 배관길이가 훨씬 더 크다면 누출발생빈도가 더 높은 값을 갖는다는 것을 알 수 있었다. 또한 대상 파이프라인의 허용위험수용범위는 전체 누출 빈도 값인 최대 1.00E-01/yr로부터 최소 2.50E-02의 영역을 나타내고 있어 이에 상응되는 높은 Consequence를 수용 가능한 영역으로 낮추는 조치가 필요함을 보여주고 있고, 종합파손확률에 대해 사용시간을 회기 분석법(Regression Analysis)으로 예측한 결과, 이에 대한 방정식을 유추할 수 있었고, 그에 대한 결과가 대상 파이프라인의 사용 년 수인 11년에서 13년으로 나타나 실제 대상배관들의 연령과 거의 일치함을 알 수 있었다. 따라서 본 연구에서 제안된 위험성 서열화 접근방법은 실제적으로 지하배관의 유지관리를 하는데 있어서 매우 효율적으로 적용될 수 있을 것으로 사료된다.

• 천문학논총
• /
• 제36권3호
• /
• pp.47-63
• /
• 2021

와이즈/네오와이즈 자료를 사용하여 1형 활동은하핵의 근적외선 장기 변광 특성을 살펴보았다. 활동은하핵은 밀리퀘이사 목록을 사용해 가시광에서의 등급 제한을 두어 선정하였고, 여러 번의 다중시점 측광 자료를 확보하기 위해 황도북극과 황도남극에 가까운 대상으로 한정하였다. 이후 와이즈와 네오와이즈 데이터베이스에서 해당 대상들의 측광 자료를 추출하였다. 일부 근적외선에서 검출되지 않은 경우와 관측 횟수가 지나치게 적은 경우를 제외하고 총 73개의 1형 퀘이사 및 활동은 하핵, 140개의 측광학적으로 선택된 활동은하핵 후보에 대해 W1 (3.4 ㎛), W2 (4.6 ㎛) 밴드 광도곡선을 구성하고 이를 이용해 변광 분석을 수행하였다. 변광 여부를 판단하기 위해 초과 분산 값과 변광의 유의확률 P_var를 계산하였다. 초과 분산이 포아송 오차에 의해 추정되는 오차값보다 큰 경우, 그리고 P_var이 0.95보다 크거나 같은 경우를 변광으로 판단했는데, 활동은하핵 73개 중 19개, 활동은하핵 후보 140개 중 12개가 W1, W2 밴드 모두에서 변광 대상으로 판단되었다. W1 밴드보다 W2 밴드에서 변광 대상으로 판단되는 숫자가 작게 나타났는데, 이는 긴 파장으로 갈수록 변광의 정도가 작아짐을 시사하는 것으로 보인다. 약 9 ~ 26%의 대상들이 근적외선 변광을 보였다. 감쇠 랜덤워크 모형을 사용하여 변광 폭(σ)과 완화 시간(τ), W1과 W2 밴드 사이의 시간 지연 등을 추정하였다. 변광 폭 및 완화시간은 W1 등급과 큰 상관관계를 보이지 않았으며, 두 변수 사이에도 특별히 두드러지는 상관관계가 나타나지 않았다. 단, 감쇠 랜덤워크 모형을 사용해서 시간 규모를 추정할 때 광도곡선의 분량이 충분한지를 감안하면, 완화시간이 짧은 대상들에 대해서는 변광 폭과 완화시간이 음의 상관관계를 보인다고도 볼 수 있다. 대상의 개수가 통계적으로 유의미한 결과를 제시하기에는 부족하다. X선 광도와 변광 특성을 비교했을 때에는 상관관계를 찾아보기 어려웠으나, 앞으로 얻어질 X선 탐사자료와 전천 스펙트럼 탐사자료와 결합한 추가 연구가 기대된다. 전체 대상 중에서는 시간에 따라 (W1-W2) 색이 변하는 것으로 판단되는 흥미로운 대상이 4개가 존재했는데, 이들의 특성에 대해서는 추후 연구가 더 필요할 것으로 전망한다.

• 기록학연구
• /
• 제27호
• /
• pp.35-88
• /
• 2011

"공공기관의기록물관리에관한법률"과 "공공기관의정보공개에관한법률"제정과 함께 공무원들의 인식이 행정정보를 공개하는 것으로 전환되면서, 지방의 기록관리 필요성이 부각되고 있다. 2007년 "공공기록물관리에관한법률"이 시행되면서 영구기록물관리기관의 설치가 의무화 되었고, 지방자치 정신을 이어나갈 수 있도록 하였다. 지방자치는 중앙에 집중된 권한을 지방으로 분산시키는 것을 바탕으로 하는 제도로서, 권력분립의 원리와 함께 국민의 자유를 보장하는 역할을 한다. 이는 주민의 삶의 질을 향상시키고, 균형 있는 지역발전을 이루는 생활정치의 장이며, 민주주의 훈련의 장의 역할을 한다. 지방기록관리를 통해서 자치단체는 업무의 설명책임성과 행정의 투명성을 강화시킬 수 있으며, 이를 통해서 주민들의 자발적인 정치(행정) 참여가 더욱 활발해 질 수 있다. 본 연구는 지방기록 중에서 가장 가치가 높은 광역자치단체장의 기록 관리 방안을 제시한다. 광역자치단체장 기록의 체계적인 기록관리를 위해 법규의 정비와 생산 등록, 보존, 활용 및 서비스의 기록 관리 체제를 수립하는 방안을 제안하였다. 우선 광역자치단체장 기록의 범주를 산정하기 위해 기록을 생산하는 보조 보좌기관인 부단체장실과 비서실, 공보관실의 업무를 파악하였다. 또한 16개 시 도 비서실, 공보관실 직원의 인터뷰 결과와 정보공개청구를 통해서 광역자치단체장 기록의 관리 현황을 파악하고, 문제점을 도출하였다. 이를 해결하기 위해 법규의 정비와 기록관리 체계를 제시한다. 법규는 광역자치단체의 행정기구설치조례시행규칙과 기록관설치 운영규칙의 개정, 국가기록원의 기록관운영규칙제정참고안의 개정을 통해 법규의 정비를 제안한다. 또한 기록관리 체계로서 광역자치단체장 기록의 생산 등록, 보존체계의 구축, 광역자치단체장 기록의 활용 및 서비스를 제안한다. 기록을 생산하고 등록하기 위해 기록관리기준표에 광역자치단체장의 기록 생산과 관련된 업무를 하는 부서별로 단위과제를 신설하여 기록을 생산 등록할 수 있게 하였다. 활용 및 서비스를 위해서 웹 사이트의 활용과 기록 목록을 작성하여 목록서비스를 통해서 어떠한 기록이 관리되고 있으며, 서비스 받을 수 있는지를 주민들과 임기가 끝난 광역자치단체장에게 기록을 활용할 수 있도록 하는 것을 제안하였다.

• 인터넷정보학회논문지
• /
• 제22권6호
• /
• pp.25-32
• /
• 2021

미래 해상 환경 변화에 맞춰 해상 항로표지가 다양한 분야에 걸쳐 활용되며 쓰임이 증대되고 있다. 해상 항로표지는 항행하는 선박의 위치, 방향 및 장애물의 위치를 알려주는 항행보조시설로, 현재는 단순히 선박의 안전 항해를 도울 뿐 아니라, 여러 센서와 카메라를 탑재하여 해양 기상환경을 파악하고 기록하는 수단으로 변모하고 있다. 하지만 주로 선박과의 충돌로 인해 소실되며 특히 해무로 인한 관측 시야 저하로 안전사고가 발생한다. 해무 유입은 항만, 해상교통 등에 위험을 초래하고 시간과 지역에 따라 발생 가능성의 차이가 커 예측이 쉽지 않다. 또한, 전 해역에 분포되어있는 항로표지의 특성상 개별 관리가 어렵다. 이를 해결하고자 본 논문에서는 항로표지에 설치된 카메라에서 촬영한 영상으로 해무 강도를 측정하는 방안을 통하여 해양 기상환경을 파악해 보완하고 날씨로 인한 항로표지 안전사고를 해결하는 것을 목적으로 한다. 설치가 어렵고 높은 비용이 드는 광학 및 온도 센서 대신 항로표지에 설치된 카메라의 일반 영상을 사용하여 해무 강도를 측정한다. 덧붙여 다양한 해역에서의 실시간 해무 파악을 위한 선행 연구로, 안개 모델(Haze Model), Dark Channel Prior(DCP)를 이용해 해무 강도 측정 기준을 제시한다. DCP를 적용한 영상에서 특정 픽셀값의 문턱값(Threshold value)을 설정하고, 이를 기준으로 전체 영상에서 해무가 존재하지 않는 픽셀의 수를 통해 해무 강도를 추정한다. 합성 해무 데이터셋과 실제 해무 동영상을 캡처해 만든 실제 해무 데이터셋으로 해무 강도 측정 여부를 검증했다.

• Radiation Oncology Journal
• /
• 제28권1호
• /
• pp.1-8
• /
• 2010

목 적: 흉선종환자에서 방사선치료 효과를 평가하고 생존율에 영향을 미치는 예후인자를 파악하기 위하여 후향적 분석을 시행하였다. 대상 및 방법: 2002년 3월부터 2008년 1월까지 본원에서 흉선종으로 진단 받고 방사선치료를 시행 받은 21명의 환자를 분석하였다. 대상환자의 추적관찰 기간은 3~89개월(중앙값, 37개월)이었다. 남녀 구성비는 4：3이었고 연령분포는 24~77세(중앙값, 57세)이었다. Masaoka병기는 II기 10명(47.6%), III기 7명(33.3%), IVa기 4명(19.1%)이었다. 전체 21명 중 15명(완전절제[흉선절제술], 14명; 불완전절제, 1명)에서 수술이 시행되었고, 시험적 개흉술(exploratory thoracotomy), 경부림프절 생검 등을 포함한 조직검사만 시행한 경우는 6명(28.6%)이었다. 병리학적으로 WHO 세포형 A 1명(4.8%), B1-3 10명(47.6%), C 10명(47.6%)이었다. 방사선치료는 3차원입체조형기법으로 시행하였고 총 방사선선량은 52~70.2 Gy (중앙값, 54 Gy)이었다. 성별, 연령, 종양의 크기, 병리학적 분류, Masaoka 병기, 수술시행 여부, 근무력증 유무 및 방사선량 등에 따른 전체 및 무진행생존율의 차이를 분석하였다. 결 과: 전체 환자에서 3년 생존율은 80.7%이었고 3년 무진행생존율은 78.2%이었다. WHO 세포형 C 10명에서 완전절제를 시행한 4명 중 3명(75%)이 생존하였고, 조직검사만 시행한 6명 중 3명(50%)이 생존하였다. 수술을 시행받은 15명 중 방사선조사 범위 내에서의 재발은 없었다. 4명(19.1%)에서 원격전이가 확인되었다. 조직검사만 시행받은 6명의 치료반응은 부분관해 4명(66.6%), 불변 1명(16.7%) 그리고 진행 1명(16.7%)이었다. 치료 후 방사선폐렴이 Radiation Therapy Oncology Group (RTOG) grade 1이 1명(4.8%), grade 2가 2명(9.5%), grade 3과 grade 4가 각각 1명(4.8%) 있었다. 단변량 분석상 생존율에 유의한 예후인자는 연령(60세 이상, 58.3%; 60세 미만, 100%; p=0.0194), 병리학적 분류(WHO 세포형 A-B3, 100%; C, 58.3%; p=0.0194), 수술시행여부(시행, 93.3%; 미시행, 50%; p=0.0096)이었다. 결 론: 수술 후 보조적으로 방사선치료를 시행 받은 15명 모두 방사선치료 조사야 내 재발이 없었고 WHO 세포형 C에서 방사선치료 전 수술이 시행된 경우 조직검사만 시행된 경우보다 좋은 성적을 보였다. 이에 저자들은 흉선종 환자들을 대상으로 한 방사선치료 경험을 보고하는 바이다.

• 한국농공학회지
• /
• 제7권1호
• /
• pp.861-876
• /
• 1965

During my stay in the Netherlands, I have studied the following, primarily in relation to the Mokpo Yong-san project which had been studied by the NEDECO for a feasibility report. 1. Unit hydrograph at Naju There are many ways to make unit hydrograph, but I want explain here to make unit hydrograph from the- actual run of curve at Naju. A discharge curve made from one rain storm depends on rainfall intensity per houre After finriing hydrograph every two hours, we will get two-hour unit hydrograph to devide each ordinate of the two-hour hydrograph by the rainfall intensity. I have used one storm from June 24 to June 26, 1963, recording a rainfall intensity of average 9. 4 mm per hour for 12 hours. If several rain gage stations had already been established in the catchment area. above Naju prior to this storm, I could have gathered accurate data on rainfall intensity throughout the catchment area. As it was, I used I the automatic rain gage record of the Mokpo I moteorological station to determine the rainfall lntensity. In order. to develop the unit ~Ydrograph at Naju, I subtracted the basic flow from the total runoff flow. I also tried to keed the difference between the calculated discharge amount and the measured discharge less than 1O~ The discharge period. of an unit graph depends on the length of the catchment area. 2. Determination of sluice dimension Acoording to principles of design presently used in our country, a one-day storm with a frequency of 20 years must be discharged in 8 hours. These design criteria are not adequate, and several dams have washed out in the past years. The design of the spillway and sluice dimensions must be based on the maximun peak discharge flowing into the reservoir to avoid crop and structure damages. The total flow into the reservoir is the summation of flow described by the Mokpo hydrograph, the basic flow from all the catchment areas and the rainfall on the reservoir area. To calculate the amount of water discharged through the sluiceCper half hour), the average head during that interval must be known. This can be calculated from the known water level outside the sluiceCdetermined by the tide) and from an estimated water level inside the reservoir at the end of each time interval. The total amount of water discharged through the sluice can be calculated from this average head, the time interval and the cross-sectional area of' the sluice. From the inflow into the .reservoir and the outflow through the sluice gates I calculated the change in the volume of water stored in the reservoir at half-hour intervals. From the stored volume of water and the known storage capacity of the reservoir, I was able to calculate the water level in the reservoir. The Calculated water level in the reservoir must be the same as the estimated water level. Mean stand tide will be adequate to use for determining the sluice dimension because spring tide is worse case and neap tide is best condition for the I result of the calculatio 3. Tidal computation for determination of the closure curve. During the construction of a dam, whether by building up of a succession of horizontael layers or by building in from both sides, the velocity of the water flowinii through the closing gapwill increase, because of the gradual decrease in the cross sectional area of the gap. 1 calculated the . velocities in the closing gap during flood and ebb for the first mentioned method of construction until the cross-sectional area has been reduced to about 25% of the original area, the change in tidal movement within the reservoir being negligible. Up to that point, the increase of the velocity is more or less hyperbolic. During the closing of the last 25 % of the gap, less water can flow out of the reservoir. This causes a rise of the mean water level of the reservoir. The difference in hydraulic head is then no longer negligible and must be taken into account. When, during the course of construction. the submerged weir become a free weir the critical flow occurs. The critical flow is that point, during either ebb or flood, at which the velocity reaches a maximum. When the dam is raised further. the velocity decreases because of the decrease\ulcorner in the height of the water above the weir. The calculation of the currents and velocities for a stage in the closure of the final gap is done in the following manner; Using an average tide with a neglible daily quantity, I estimated the water level on the pustream side of. the dam (inner water level). I determined the current through the gap for each hour by multiplying the storage area by the increment of the rise in water level. The velocity at a given moment can be determined from the calcalated current in m3/sec, and the cross-sectional area at that moment. At the same time from the difference between inner water level and tidal level (outer water level) the velocity can be calculated with the formula $h= \frac{V^2}{2g}$ and must be equal to the velocity detertnined from the current. If there is a difference in velocity, a new estimate of the inner water level must be made and entire procedure should be repeated. When the higher water level is equal to or more than 2/3 times the difference between the lower water level and the crest of the dam, we speak of a "free weir." The flow over the weir is then dependent upon the higher water level and not on the difference between high and low water levels. When the weir is "submerged", that is, the higher water level is less than 2/3 times the difference between the lower water and the crest of the dam, the difference between the high and low levels being decisive. The free weir normally occurs first during ebb, and is due to. the fact that mean level in the estuary is higher than the mean level of . the tide in building dams with barges the maximum velocity in the closing gap may not be more than 3m/sec. As the maximum velocities are higher than this limit we must use other construction methods in closing the gap. This can be done by dump-cars from each side or by using a cable way.e or by using a cable way.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.